FCA Rear Seat Entertainment User Manual © 2021 VOXXAutomotive Corporation. All rights reserved. This manual, or any portion thereof, may not be reproduced without the express written permission of VOXXAutomotive Corporation. Design and specifications subject to change without notice.
REAR SEAT ENTERTAINMENT SYSTEM Contents Important Notice ......................................................................................... 4 Safety Precaution......................................................................................... 4 Caution ........................................................................................................ 5 Remote Control Operation ................................................... 7 General Operating Instructions ............................
Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle.The monitors should never be installed where they will be visible, directly or indirectly, by the operator of the motor vehicle.
Caution Be sure to run the vehicle engine while using the system. Using this system without running the engine can result in battery drain. To avoid the risk of battery drain, please remember to turn off the system when the vehicle is not in use. Do not touch the inner pins of the jacks on the front panel. Electrostatic discharge may cause permanent damage to the system.
Accessories Wireless Headphones and Remote Both of your Uconnect Theater screens come with their own Remote and Headphones. The remote is designed to help you make the most of Uconnect Theater. Use the touchpad like a mouse to navigate through the system. Or use the arrow buttons to click through the options on the screen. It’s totally up to you. Press HOME to return to the source menu or MUTE to silence the audio. You’ll find standard media controls like PLAY, FAST-FORWARD and REWIND.
Port 1 2 3 Name DESCRIPTION Audio 3.5mm Audio Jack Output Out USB Type USB Type-C Charging Port (15Watts) C HDMI In HDMI Input (Supports up to 1080p) Remote Control Operation Installing or Replacing the Battery 1. On the rear of the remote control, remove the battery cover. 2. Install two “AAA” batteries as shown. The remote control is only designed to operate this device. It is not a universal remote control and will not operate any other device.
Remote Control Operation (continued) Icon (Sample only) Name/Category Description Power The remote has a dedicated button that will toggle power onor off of the TV.
Volume Keys The remote has a method by which it can control the up/down volume output of the TV. Pressing and holding down the volume up or down button will continuously send the volume command for the respective up/down command. The number of volume steps are software configurable so that adequate testing can determine the appropriate level of steps Mute Button The remote has a mute button that toggles between mute/unmute states. Home The remote has a HOME button on the front face of thedevice.
Menu A MENU button activates commands when prompted in the user interface Icon (Sample only) Name/Category Description Guide A Guide button pulls up the universal program guide. Recent Recent button will pull up the “Recent” row screen that will allow user to switch between recently watched content. Channel Rocker Channel UP/DOWN button allows user to go to the next live TV channel. Settings Settings button will pull up a side panel overlay to provide quick access to Picture and Sound settings.
Content Partner Button-1: My FCA A direct shortcut button to FCA Special APP.
General Operating Instructions Screen 1 02. Remote pairing : Screen 1 01. Cobranded Animated Boot 03. Continue or Video Demo 04. Connecting to Car Network 05. Software Updates 06. 06. Account Sign-in / Sign Up sell 07. PCON 08. PrimeUp- 08. Content Wizard Screen 2 Trigger 01. Cobranded Animated 02. Hold Screen for Screen 03. Screen 2 remote Refer to full screen 2 flow. 10.
Global Remote /Touch Back &Power 0.1 0.2 Screen is touched(back disabled)… Screen using remote… No HUD Peek is shown whenthe customer is interacting withremote. Remotescreens willshowfocus states of buttons, touch mode will remove focus and follow global touch / remotebehavior HUD Peek appears on screen when the customer touches the screen. It remains on screen while touching and will dismiss after 3 seconds (configurable) of no touch interaction.
Boot Screen 1 2 3 4 5 6 7 8 9 10 1.
Boot Screen 1 2 3 4 5 6 7 8 9 10 1.2 Loading Language A Information while loading (this text will need to rotate through localizedlanguages) If the language canloadduringthe boot animation, we will not show this screen. If languagefails to be received from the car, fall back to language selectionscreen.
Remote Pairing 1 2 3 4 2.1 PAIR 1st REMOTE Finish boot… Pair remote 1 only: The device will be listening for pairing from the start, but the remote will not go into pairing mode until the customer explicitly acts on the button long presshome. If skipped the customer will not be able to use the remote in OOBE, they will need to use touch and will need to pair after through settings 5 6 7 8 9 10 2.
Continue /Demo Video Only 1 3.1 A CONTINUE / WATCH DEMO: CONTINUE FOCUS Complete remote pairing orskip… Option for customer to continue on with OOBE or watch videodemo • Continue is in focus by default • Cobranded screen with partner logo and Fire TV 2 3 4 5 6 7 3.2 A CONTINUE / WATCH DEMO: WATCH DEMO FOCUS D-Pads down… 8 9 10 3.3 A DEMO VIDEO Select watch demo touch or remote… Demo videocan be created by the OEM, or Amazon GTM.
Connecting toNetwork 1 4.1 CONNECTING TO CARNETWORK Continue from continue/demo screen… Auto connection to car wifi 2 3 4 5 4.2 CONNECTION SUCCESSFUL Connect successfully to carnetwork… 6 7 8 9 10 4.3 NETWORK SELECTION Auto connection to car network failed… Customer can select a brought in hotspot if the car wifi fails toconnect.
Software Update 1 5.1 CHECKING FOR UPDATES Complete network connection… Checkingifthereareany newupdates. 2 3 4 5 6 7 8 9 10 5.2 INSTALLINGUPDATES Update found… Duringtheday 0 updatepower needs to remain on, customer should not turn off vehicle.
Account SignIn 1 2 3 4 5 6 7 8 9 10 6.7 6.1 SIGN IN OR SIGN UP After update is complete… This screen also has TOS 6.2 SIGN IN Select already have anaccount… The customer can sign in on mobile or with the keyboard on thescreenviatouch or remote 6.
Account SignIn 1 2 3 4 5 6 7 8 9 10 6.12 6.4 SIGN IN MOBILE ENTER EMAIL & PASSWORD Sign in via mobile goingto URL… 6.5 ENTER ACTIVATION CODE Add email address &password… 6.
Account SignIn 1 2 3 4 5 6 7 8 9 10 6.7 6.12 6.7 ENTER EMAIL Tap for ‘on TV Setup' / select menu button … 6.
Account SignIn 1 2 3 4 5 6 7 8 9 10 6.12 6.9 SIGN UP MOBILE ENTER EMAIL & PASSWORD Sign up via mobile going to URL… 6.10 ENTER ACTIVATION CODE Add email address &password… 6.
Account SignIn 1 2 3 4 5 6 7 8 9 10 6.6 6.8 6.11 6.12 REGISTERING FIRE TV Successful Activation… 6.
PCON 1 2 3 4 5 6 7 8 9 10 7.
Prime Up-sell 1 2 3 4 5 6 7 8 9 10 8.
Content Wizard *Refer to app spec for additional details 1 2 3 4 5 6 7 8 9 10 9.4 9.1 CHOOSE APPS? After PCON and Prime Up-sell… Note: For ROW regions where apps are not available, content wizard will not appear atall in OOBE. 9.2 POPULAR SERVICES Choose Apps… 9.
Content Wizard 1 2 3 4 5 6 7 8 9 10 9.3 9.4 SPORTS APPS D-Pad Right orTap Live… 9.5 FEATURED APPS D-Pad Right orTap Live… 9.
Home Launcher 1 2 3 4 5 6 7 8 9 10 10.
Overview: Screen2 Screen 2 01. Cobranded Animated Boot 02. Hold Screen for Screen 1 03. Screen 2 remote pairing 04. Continue or Video Demo 05. PCON 06 06. Content Wizard 07.
Boot Hold 1 1.1 ANIMATED BOOT Turn on car… 2 3 4 5 6 7 1.2 BOOT HOLD UNTIL SCREEN 1 COMPLETE Start setup on screen 1… We will hold the screen here until screen 1 OOBE iscomplete. This device will not be searching for a remote until it receives thesignal from screen 1 or the customer manuallyadvances.
Remote Pairing: Screen2 1 2 3 4 5 6 7 10.1 Home Launcher A screen, orthecustomer explicitlyadvances by touching the confirmationbutton. B long press the remote will be put into discovery mode topair C A B C This device will only begin searching for a remote once it receives the signalfrom screen one to show this Thecustomer is required to long press theremote button to ensure it is an intentional action.
Settings Remote/Touch 11.4 11.1 Home Touchscreenonhome… 11.2 HUD OPEN Bezelswipefromrighttoleftortapgear button on HUDPeek… 11.
Settings Remote/Touch 11.3 11.6 11.4 PREFERENCES SETTINGS - TOP OF LIST Tap on PreferencesSettings Node… 11.7 11.4 11.5 PREFERENCES SETTINGS - SCROLL Swipe up Preferences SettingsList… Note: Header will still scroll up after moving from first item in touch and remote behavior. 11.
Settings Remote/Touch 11.6 11.7 PRIVACY SETTINGS - SCROLL Tap 3P App Usage Data Setting when not selected… Note: When the customer taps a toggle item by touch when it is not in the selected slot showing the description, it will take take action to change the state and advance the item to the selected slot to reveal the info. 11.
Troubleshooting Symptom Remedy Monitor does not power on. • • • Verify the vehicle is in the ON/RUN or ACC position. Verify the battery is installed in the remote control and fresh. Verify the fuse located in-line is good. Remote control does not function. • • Verify that the battery in the remote control is fresh. Verify that the remote sensor lens is not obstructed. • Try to reset the monitor. This is done by pressing and holding the power button on the top of the monitor for at least 5 seconds.
Specifications LCD Backlight LED Resolution 1080p LCD Panel USB, HDMI, FireTV Sources I/O Ports 3.5mm Headphone Jack, USB port, HDMI Headphone (Audio Out) IR headphones (included), Wired headphones (not included) Video Display System NTSC/PAL HDMI Compliant Version 1.4 Wireless Audio Dual channel digital audio transmitter, supports stereo headphone operation (reception: 0.9 m; 80°, 1.
Compliance Information FCC ID: Z3K-VRM IC: 9930A-VRM FCC Notice This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISED Notice: This Class B digital apparatus complies with Canadian ICES-003. Cet Appareil numérique de la classe B est conforme à la narme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Compliance Information WEEE Notice Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that device shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
