ATM1020 ACTIVE RSE MONITOR-10.
English ATM1020 Owners Manual English 2012 Atom Enterprises, Inc. All rights reserved. This manual, or any portion thereof, may not be reproduced without the express written consent of Atom Enterprises, Inc. For any questions, please call customer service (855) 574-2866 www.atomenterprisesinc.
ATMAN1020QA ATM1020 RSE Quick Start Guide 8 7 1 1. 2. 3. 4. 5. 6. 7. 8. 2 3 4 6 5 Power button-turns system power on/off. Home button-press home button and back to home page. Menu-press menu to enter setup page Back-back to previous page or exit the app Search-press search to open the browser Eject-ejects disc (display MUST be in closed position to insert/eject disc) Disc slot (ONLY ACCESSIBLE WHEN DISPLAY IS CLOSED) Monitor identification- “A” OR “B”.
English Inputs/Outputs 4 1 5 2 3 1. 2. 3. 4. 5. 6. 6 HDMI input (MHL compatible) USB 2.0 input (1 amp charging) USB 2.0 input (2 amp charging) Headphone jack output (wired) A/V input jack (analog 3.
Remote Control Buttons/Functions To control monitor A, press the A button first. To control monitor B, press the B button first. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1. POWER - turns power on/off 2. UP - navigate selection up 3. LEFT - navigate selection left 4. ENTER - accepts selection 5. FM - turns FM transmitter on/off (station can also be changed when button is depressed) **Function is for Monitor A only. 6. PLAY - select to play media 7. REVERSE - reverses play (fast) 8.
English Remote Control Battery Installation/Operation TAB 1. 2. 3. Remove battery cover by depressing tab (in direction of arrow) then lifting cover. Insert 2 AAA batteries (make sure batteries are installed with correct polarity (+/-) Reinstall battery cover ! NOTE: There is risk of fire if batteries are not handled correctly. Do NOT recharge batteries. Do NOT intermix different battery types, or batteries not charged the same amount. Please dispose of batteries per local laws.
Wireless Headphones Headphones are dual channel (A and B channel) infrared wireless. Channel must be selected to match the display monitor being viewed (see below) Headphones must be in line of sight of display monitor to receive audio signal Headphones require (2) AAA batteries. NOTE: Please make sure volume control is set to low for the safety of the next user (excessive volume can cause permanent damage) Please note: headphones will power off automatically if no audio is played for more than 3 minutes.
Operating Instructions Turning power on Turn vehicle ignition “ON/ACC”. Press power button on RSE front panel or remote control. Playing a Disc Close display and insert disc (label side facing towards you) Open display (AFTER DISC IS FULLY INSERTED) Click Disc Player app from home page. Press play to start media. NOTE: disc can only be ejected when display is in closed position. Playing media from USB Insert USB device into USB slot on left side of unit. Click USB icon from home page.
Playing audio through vehicle radio system 1. Click Setup icon from home page and enter FM setup to choose the channel to play audio. 2. Depress FM on the remote control (if FM button is depressed again, it will turn off the FM transmitted) Use the left/right navigation buttons to select desired radio station to play audio (88.3MHZ ~ 107.7MHZ ) Tune vehicle radio to station selected on unit. NOTE: Quality of audio may be affected by station selected.
Unit will not power on 1. Be sure vehicle is turned on Remote control not working 1. Check batteries for correct installation and make sure they have plenty of charge left. 2. Make sure correct monitor is selected on the remote for the monitor desired to be controlled (monitor A/B) 3. Be sure remote is aimed directly towards top of monitor being controlled with no obstructions. No picture 1. Ensure correct app is selected (ie: Disc player, Aux-in, USB, SD, etc) 2.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Panel size 10.1” Resolution 1024 x 600 Backlight LED Ratio 16:9 Luminance 500 NIT (typ.) Expected backlight life 20k hours Min. Operation temperature -20~70 degrees C Storage temperature -30~80 degrees C Video display system NTSC Input voltage 10-16VDC I/O ports USB 2.0, HDMI, SD, 3.5mm AV, 3.5mm earphone IR Channels A monitor: 2.3/2.8mhz B monitor: 3.2/3.