ESSAY 2.
SAFETY INSTRUCTIONS Important — Safety Precautions 1. To prevent fire or shack hazard, do not expose this device to rain or moisture. 2. Do not use this video device near water, For example, a bathtub, watch bowl, kitchen sink, Laundry tub or swimming pool, or in 3 wet basement, 3. No naked flame sources, such as lighted candles, should be placed on this device, 4. To avoid electrical shock, do not open this device, and do not insert any metallic object through the ventilation grills. 5.
CHECKING CONTENTS OF BOX anon CONTENTS PAGE CONTROLS AND FUNCTIONS 2-1 2.4GHz WIRELESS CAMERA. 2-2 2.4GHz WIRELESS RECEIVER. 2-3 REMOTE CONTROLLER, INSTALLATION 3-1 32 GHz WIRELESS CAMERA 33 2.4GHz WIRELESS RECEIVER. 3-4 ADJUSTING THE ANTENNA. SYSTEM OPERATION 4-1 OPERATION WITH TY 4-2 OPERATION WITH TV & VCR. 4-3 OPERATION WITH MONITOR 1... cov virgins vs overdubbing 4-4 OPERATION WITH MONITOR & VCR...
CONTROLS AND FUNCTIONS FRONT VIEW 5 LL LENS 1/4" B/W or color Image sensor with builtin 64° fixed wide-angle lens. 2, MICROPHONE Built-in condenser microphone. 3. GHz ANTENNA High gain directional patch antenna sends A/V signal to the receiver. 4, INFRARED LED ILLUMINATION Built-in Infrared LED illuminate the image fo let you see it clearly even when an object is in 0.5 lux darkened area. {B/W Camera only) 5. STAND MOUNTING BASE Reinforcement lock for camera stand.
CONTROLS AND FUNCTIONS REMOTE CONTROLLER 1. INFRARED LED To send the infrared control information. 2. CHANNEL SELECTOR BUTTON 2a. MANUAL MODE CHI or CH2 or CH3 or CH4 will be selected by pressing this button, 2b. AUTO SCAN MODE CH1, CH2 will be selected by pressing this button one time, CH3, CH4 will be selected by pressing this button two times, CH1, CH2, CH3 will be selected by pressing this bunion three times, CHI, CH2, CH3, CH4 wiki be selected by pressing this button four times. 2¢.
INSTALLATION PLASTIC BASE 121500mA AL Raptor Carers Plastic Base = 1. Attach the plastic base to stand mounting socket of the Camera bottom. 2. Take the plastic base from stand mounting socket gs necessary. 3. Connect the supplied 12V 500mA AC adapter to the DC IN jack at the rear of the Camera and plug it into 230V (or 120V) AC outlet. STEEL BASE 5 i Comers TET eet Base.
INSTALLATION SYSTEM OPERATION | ESTER EEN NOTE: The front (patterned side) of the antennas on both Camera and Receiver You can connect both units with RCA to scary cable, unit must face each other for optimum performance, as both ere directional bi gain shenanigan.
SYSTEM OPERATION . ANTIVENIN CABLE B TE OHM COAXIAL CABLE &w Rear . ‘ 1. Connect one end of the RCA cable fo ie “Audio {Video Jacks at the rear of the Repressive. Plug the other end of RCA cable (or scary cable labeled “Receiver”} into the Audio (Ly Video in jacks on your VCR, Be sure o match the plug color on the cable in both connections. 2. Conniption one end of another scary cable to the Audio/Video jacks on your TV. Plug the other end of Cart cable into the Audio/Video Out jacks on your VOR. 3.
SYSTEM OPERATION OPERATION WITH MONITOR & VCR 12000 HE space Receiver Rear Monitor Rear 1. Connect one end of the RCA cable to the Audio {LY Video jacks at the rear of the Receiver. Plug the other end of RCA cable (or scant cable fabled “Receiver} into the Audio/Video in jacks on your VCR, Be sure to match the plug color on the cable for both connections. 2.
MULTIPLE CHANNEL OPERATION ONE RECEIVER BY MULTIPLE CAMERA OPERATION (Cont'd) 2. Connect the Receiver unit to your TV with or without VCR using RCA cable. {or scary cable labeled “Receiver”) (see instructions on page 12-15} 3. Tum on all Cameras. The Cameras must use different channel, Select the channel 1-4 by using Channel Selector Switch on each Camera unit. 4. Tum on your remote TV or Monitor that is connected to the Receiver. (If you arc using TV, Set your TV to Video mode.) 3.
TROUBLE SHOOTING 1f the system does not function properly, check the following points before contact the service center. Ce 2. Turn on all TVs or Monitors, which are connected to the Receiver unis. {If you are using TV, Set all TVs to Video mode.) Problems 3. Turn on the Camera and all Receiver units. Search the channel 1-4 by using 4 Causes and remedies and Ri and select the best one Channel Selector Switch on the Camera receivers and sel Camera Receiver for optimum reception in your area. .
SERIES 2.4GHz WIRELESS CAMERA SYSTEM Model Function 2071TR. | 2072T/R 2073T/R 2074T/R Chimera B/W B/W Color Color With IR Remote Controller yes no yes no MAJESTY ELECTRONICS CO., LTD ROOM 1004,STANHOPE HOUSE, © 738 KING’S ROAD, QUARRY BAY, HONG KONG TEL: (852) 2563 4292, 2562 6212 FAX: (852) 2565 7026, 2516 9417 E-mail: Web Site: jesmay.com.