Instructions / Assembly

Cosmetic Box Installation Instructions
1. Position unit fl ush against the wall
at desired height. Mark screw holes.
2. Attach the back of the cabinet to the
wall with the screws provided. See
Fig. 1.
Caution: If unable to screw into studs,
use toggle bolts or other suitable
fasteners.
3. Assemble door pulls to door as follows:
Step 1: Place door on fl at surface with
the mirror side or plastic
side up.
Step 2: Remove the paper back from
the pull and press in place
as shown in Fig. 2.
4. Install sliding doors in cabinet by
lifting into upper channel and dropping
them down into lower channel.
Note: Insert right hand door in rear
channel fi rst.
5. Peel protective coating from the
decorative frame on the product
when provided.
A99044137 A
Mounting Holes
Mounting Screws
Fig. 1
Fig. 2
1 "
1
8
1 "
1
4
1 "
1
8
CENTER LINE
Bumper
(Back side of left mirror door)
Left Door in
Front Track
Door Pull
Right Door in
Back Track