CMM710 10” CAPACITIVE TOUCH SCREEN MULTIMEDIA MECHLESS RECEIVER AM-FM, Bluetooth USB Screen Mirroring Front & Rear Camera Input INSTALLATION & OWNER’S MANUAL B-Type
CMM710 INFORMATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CMM710 INFORMATION Safety Notice Video / movie playback will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video / movie functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most jurisdictions for the driver to view video while the vehicle is in motion. The SAFETY NOTICE is reminder to drive responsibly and safely while using your mobile phone device, or any APP’s that are compatible with this unit.
CMM710 INSTALLATION Preparation Please read and understand entire manual before installation. Consult a qualified technician for detailed instructions or installation assistance. Before You Start • Disconnect negative battery terminal. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Unpack unit from its protective packaging.
CMM710 INSTALLATION Input / Output Wiring Diagram Tips EN When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC blade-type fuse located on the back of the unit. Front / Rear camera inputs Up to two cameras (not included) can be used. We recommend JENSEN Part # BUCAM200J for front camera and BUCAM300AJ or BUCAM400AJ for rear camera.
CMM710 OPERATION Main Control Locations 1 Microphone 4 Volume Up 7 microSD Card Slot 2 Power / Mute 5 Volume Down 8 USB Slot 3 Voice Assistant 6 Reset 9 Auxiliary Input 1 2 3 4 5 6 7 8 9 10 11 12 13 Power Mode Play / Pause Mute Talk End Call Setup Volume Up Zoom Select Tune/Track Up Volume Down Audio 14 15 16 17 18 19 20 21 23 24 25 * Key Loudness Number Keys Root OSD (On Screen Display) Local / Random Tune/Track Down AS/PS / Repeat Stop Enter Band How to Replace the Battery Use CR2025 Replace
CMM710 OPERATION Source Menu Operation 2 1 3 4 10 9 8 7 6 5 Radio 1 Press to access Radio. USB Mirroring 2 Press to initiate USB mirroring. Bluetooth Phone 3 Press to access Bluetooth phone. Settings 4 Press to display and adjust system settings. Rear Camera 5 Press to display the rear camera. AV Input 6 Press to access AV input. Auxiliary Input 7 Press to access auxiliary input. BT Music 8 Press to access the Bluetooth music.
CMM710 OPERATION On Screen Controls 1 8 2 3 4 5 Screen Brightness 1 Press up to two times to dim the screen. Press a third time to put the unit in standby mode (screen will go black). Press anywhere on the screen to return to normal screen operation. Voice Assistant 2 Press to activate the voice assistant feature. Audio 3 Press to access and adjust audio settings.
CMM710 OPERATION Audio Settings Select any of the preset EQ settings (Flat, Classic, Rock, Pop, Jazz, Beat or User) or use the touch screen to manually adjust EQ settings. Select any of the preset Surround settings: Concert, Church, Passive, Wide, Live or None. Adjust balance (8L to 8R) and fader (8F to 8R), or use the touch screen to manually adjust balance and fader settings.
CMM710 OPERATION Settings Menu From the Main Menu, press the gear icon to access the Setup menu and adjust the following: General, Audio, Display and Bluetooth. General: • OSD Language - Select English. • Wallpaper - Select from three different wallpaper options. • Radio Area - Select Europe, USA, South America or Asia. • Time Setting - Set the date (month, day, year) and time (hours, minutes, AM/PM and 12-hour or 24-hour clock). • Beep - Enable or disable the audible beep.
CMM710 OPERATION Tuner Operation 1 2 3 9 4 5 6 Radio Operation 7 8 Select the Radio icon from the Main Menu screen. Main Menu 1 Press to return to Main Menu screen. Mode Indicator 2 Displays the current mode of operation. Tune Down 3 Preset Stations 4 Band 5 Local | Distance 6 Stereo | Mono 7 AS | PS 8 Tune Up 9 Press to tune to a lower frequency one step at a time. Press and hold to automatically tune to the last strong station.
CMM710 OPERATION USB/microSD Operation 2 1 9 3 8 4 5 USB/microSD Operation 12 6 7 To play MP3 files from a USB device or microSD card, insert a USB device or microSD card, and playback will begin automatically. To return to USB or microSD playback from another mode of operation, select the corresponding icon from the Main Menu. Main Menu 1 Press to return to Main Menu screen. Mode Indicator 2 Displays the current mode of operation.
CMM710 OPERATION Media Compatibility File Type File System File Extension FAT X FAT 16/FAT 32 .mp3/.MP3/.Mp3/.mP3 MPEG Format Sampling Frequency .rmp/.m4a X MPEG 1 MPEG 2 MPEG 2.5 MPEG 1 32/44.1/48kHz MPEG 2 12/16/22.05/24kHz MPEG 2.5 8/11.025/12kHz MPEG 1 32 ~ 320kbps MPEG 2 8 ~ 160kbps MPEG 2.
Tips EN CMM710 OPERATION Bluetooth Operation 1 5 2 3 4 5V 1A USB CHARGE 6 Nyne ADS15 7 Preparation Before using a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process. Pairing a New Device The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details.
CMM710 OPERATION Bluetooth Operation 8 9 10 11 12 13 Paired Device List 8 Talk 9 Press to connect a call to the number entered. End Call 10 Press to end a call. Previous Track 11 Press to go back to the previous track. Play / Pause 12 Next Track 13 Press to display a list of paired devices, and select desired device to connect. Press to pause the current track, then press again to resume playback. Press to advance to the next track.
CMM710 OPERATION USB Mirroring To set up USB Mirroring capabilities, select USB Mirroring from the main menu and follow the on-screen directions for connecting your Android or iPhone. Once completed, the unit will mirror phone display onto the unit’s on-screen display. To return to the main menu, press the lower left corner of the screen to display and select the home button. Note: Apple and Android operating system updates may cause your receiver to malfunction.
CMM710 OPERATION Rear Camera Connect an optional rear camera to the Rear Camera inputs (Yellow RCA connector for video and Black RCA connector for audio). Refer to the wiring diagram for details. Manual selection - Touch the REAR CAMERA icon from the Main Menu or from any operational mode (when enabled) to select camera mode. Touch the top left area on the screen to exit camera mode.
CMM710 OPERATION Steering Wheel Controls A third-party adapter must be used in order for the CMM710 to be compatible with any OEM steering wheel controls. The CMM710 has a built-in 3.5mm SWC interface that compatible with many popular 3rd party SWC control modules, such as PAC, METRA, and others. 3.
CMM710 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Namsung America Inc. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Namsung America Inc.
CMM710 OPTIONS Troubleshooting General PROBLEM Unit will not turn on (no power) Unit has power (but no sound) Unit blows fuse(s) Unit has audio (but no video) CAUSE ACTION Red and/or Yellow wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check ground connection Blown fuse on unit or vehicle Replace fuse(s) Speaker wires not connected Check all connections, including speakers Speakers are blown Replace speakers One or more speak
CMM710 WARRANTY Specifications FM Tuner US Tuning Range: EU Tuning Range: Usable Sensitivity: 50dB Quieting Sensitivity: Stereo Separation@ 1kHz: Frequency Response: 87.5MHz-107.9MHz 87.50MHz-108.00MHz 8.5dBf 10dBf 30dB 30Hz-13kHz AM Tuner Tuning Range: Usable Sensitivity: Frequency Response: 530kHz-1710kHz <42dBu 30Hz-2.2kHz Bluetooth Version: Profiles: Range: 4.
CMM710 INSTALLATION & OWNER’S MANUAL Customer Support 1-888-921-4088 (Monday-Friday, 9AM-5PM EST) Visit https://www.jensenmobile.com Designed and Engineered in USA All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of NAMSUNG AMERICA INC. Namsung America Inc. ©2020 Namsung America Inc. All rights reserved.
