PERSONAL COMPACT DISC PLAYER USER MANUAL CD-60C PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. Downloaded from www.Manualslib.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
WARNING CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM. This product contains a low power laser device. Note: This product complies with DHHS rule 21 CFR, subchapter J, Part 1040 at the date of manufacture. SAFETY PRECAUTIONS 1. 2. 3. 4. 5. 6. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing.
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
P LOCATION OF CONTROLS 1 2 3 4 5 6 7 8 9 VOLUME ON BBS OFF 10 1. 2. 3. 4. 5. 11 CD Door LCD Display Power On/Off; Play/Pause Button Stop Button Skip/Search Backward Button E-4 Downloaded from www.Manualslib.
. 7. 8. 9. 10. 11. 12. 13. 14. Skip/Search Forward Button Program Button Mode Button CD Door Open Switch Volume Knob Headphone Jack DC IN Jack BBS ON/OFF Switch Battery Compartment POWER SOURCE This CD player operates on two 1.5V DC “AA” size (UM-3) alkaline batteries (Not Included) or AC-DC adaptor with an output of 4.5V DC 700mA (Not Included). Install batteries into the player 1. Open the battery compartment cover located on bottom of cabinet. 2. Insert two 1.
BATTERY NOTE AND CARE 1. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type 2. Do not mix old and new batteries. 3. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. 4. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty. 5.
Turning Unit Power On and Off - To Turn ON the unit, press the PLAY/PAUSE button, LCD display will be on and then read the inserted disc after display “60 SEC” anti-skip message. If no disc is inserted or the inserted disc has an error, the display will show “disc”. - To Turn OFF, in CD stop mode, press STOP button once, display will go off. In CD playing mode, press STOP button twice will also turn off the power.
Battery Low Indicator • The Battery Low Indicator need to be changed. NORMAL PLAYBACK will appear in the display when the batteries PLAY MODE The whole disc is played and the player will stop after the last track is finished. SKIP AND SEARCH MODE 1. During Play or Pause mode, tap the SKIP Forward " " or SKIP BACKWARD " " BUTTON to go to the next track or go back to the beginning of the current track. 2.
PROGRAMMED PLAY 1. 2. 3. 4. 5. 6. In CD stop mode, press the PROG button once, PROG bumber appears. PROG icon and Track number “00” start flashing in the display. / button to select the desired track. Press SEARCH/SKIP When the desired track is displayed, press the PROG button to register. The PROG number changes to 02. Track number returns to 00 and flashes together with PROG. Repeat above steps 2 and 3 to program more tracks. Up to 20 tracks can be programmed into the memory.
TROUBLESHOOTING GUIDE If you experience problems in the use of this player, please check the following or call 1-800-777-5331 for Customer Service.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $10.00 to cover the cost of repair, handling and return postage. All out of warranty returns must be sent prepaid. It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at custserv@spectraintl.com for updated information on the unit requiring service. In some cases the model you have may be discontinued, and SPECTRA reserves the right to offer alternative options for repair or replacement.
