PRODUCT FEATURES: 1, Builtin camera and microphone for viewing and listening. 2. Operating Frequency: ISM band. 3. 4 Channel Monitoring auto scan or manual select, 4. Transmission Max. range (clear line of signet: 300 feet (approx. 100m} STD. 5. No Wire Leaded easy use and easy to use and easy to install. APPLICATIONS: Home Security, Baby Care, Kindergarten, Office, Factory, Store and Super Market, etc. LIST OF PACKAGED CONTENTS 1. One transmitter 2. One receiver (MODEL: TC-201} {MODEL: RX-201} 3.
FEATURES TRANSMITTER (MODEL TC-201) Camera Lens. . Focus Adjustable, Channel Select Slide Switch. Power ON/OFF Slide Switch. Microphone. . Audio output. (White) . Video output. (Yellow) Prop. . Prop TOP. 76 10. Prop Base. 11. Power input (SVDC). CENOZOIC AGP 43 RECEIVER {MODEL RX-201) . Channel/Scan Selection button. . Power ON/OFF button. . Chennai indicator LED. . Video output (Yellow). 3 . Right audio output {red). . Left audio output (White). .
CONNECTING THE RECEIVER Connect receiver Monitor « The receiver front panel has a CH/SCAN button, a two-unction bunion, Her the power is first turned the CM (normal) Mods, If press the button for more than 3 seconds, it Is in the SCAN Mode, the LED wil be flashing. 2. CH {normal} Mode: the accelerate has Input frequencies, to choose from. The input frequency selection is via Tact Switch, Press the switch once changes to the next frequency. (Do not press the switch more than & seconds) 3.
Conn act receiver to TV through VCR + Connect the AV cable to the AV output jacks of receiver and to the jacks of the VCR labeled LINE IN. Be sure the color must match on both the receiver and the VOR, if the VOR hag only a single jack of audio input, connect the white plug the TV has AV input jacks, connect the A/V cable to the "LINE OUT of the VOR and to the AY jacks of the TV. , SCAN Mode: The receiver has 4 automatic channels to show the scan speed you want to set.
NOTES FOR INSTALLING THIS SYSTEM 1. This system is a wireless communication product. The installation location should have no blockage to avoid interfering with transmission and reception. The distance western sender and receiver should be greater than 5 meters to have every sender transmit iis best signal strength. 2. Transmitter and receiver in this stern are for Indoor use only.
Nat ice : The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: {1} this device may not cause harmful interference, and {2} this device must accept any interference received, including interference that may cause undesired operation.