User's Guide

ASSISTANT FCC

This is a tabletop, installer code management tool. It is supplied with software for PCs and a USB communications cable.

FUNCTIONS:

- Installations management

- Configure products of the MOTION gamma

MINIMUM REQUIREMENTS

Supported OS:

- Windows XP-SP3,

- Windows Vista 32-SP1 / 64-SP1,

- Windows 7 32/64,

- Windows Server 2003 R2, 2008 y 2008 R2

- Windows Server 2012

- Windows 8, Windows 8.1

INSTALLATION

3.1 SOFTWARE INSTALLATION

Before installing the new software, you should make a security copy of your database.

Insert the USB memory stick inside a USB port. The Soft-ASSISTANT setup application will then start automatically.

1. Enter the register code which is on the bottom part

of the ASSISTANT.

The installation will be done automatically.

If you want to install another installation type, Server, Client or Mobile, open the help file in the USB stick “Help” and

follow the instructions of clause 3.1.

TECHNICAL DATA

Frequency 868,35MHz

Power supply USB

Power consumption < 100mA

Radiated power <25mW

Working temperature -20ºC - +85ºC

Watertightness IP20

Dimensions 150x120x45mm

Hardware:

- Pentium 4

- 512 Mbytes of RAM

- 350 Mbytes of free hard drive

- Free USB port

- ASSISTANT

2. Select the type of installation.

PAGE 1
ASSISTANT FCC EN This is a tabletop, installer code management tool. It is supplied with software for PCs and a USB communications cable.
PAGE 2
ASSISTANT FCC 3.2 DRIVERS INSTALLATION Insert the USB memory stick in a USB port of the PC. Connect the USB cable to the programmer and the PC. A window will open on the PC containing the message “New hardware found” and the Windows assistant for new hardware found will auto-run. Follow the instructions given on screen. During hardware installation, the assistant will ask you to select the USB driver path. Select the USB unit. 3.
PAGE 3
ASSISTANT FCC FR Il s’agit d’un outil de bureau qui permet de gérer les installations. Il est livré avec un logiciel pour PC ainsi qu’un câble de communication USB.
PAGE 4
ASSISTANT FCC 3.2 INSTALLATION DE LES DRIVERS Insérez le clé USB dans le lecteur du PC correspondant. Reliez le câble USB au programmateur au PC. Une fenêtre s’ouvrira avec un message indiquant la localisation d’un nouveau matériel. L’assistant de Windows correspondant s’autoexécutera alors. Suivez les instructions qui s’afficheront à l’écran. Durant l’installation du matériel, l’assistant vous demandera de sélectionner la route du pilote USB : vous devez sélectionner le lecteur de USB. 3.