M-Patch 2 Passive Stereo Controller / Switcher Owners Manual
Important Safety Instructions CAUTION: To reduce the risk of electrical shock, do not remove the cover or rear panel of this unit. No user serviceable parts inside. Please refer servicing to qualified personnel only.WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. DETAILED SAFETY INSTRUCTIONS: All safety and operation instructions of this manual should be read and adhered to before operation.
MAINS VOLTAGE The M-Patch 2 can be used with voltages ranging from 100V AC to 250V AC, please make sure that you have selected the correct voltage range on the supplied power supply before switching the unit ON. Any damage occurring as a result of incorrect voltage. INTRODUCTION Thank you for selecting the JBL The M-Patch 2. This product was designed to deliver optimal performance, functionality and years of reliable operation.
M-Patch 2 Main Features • High quality‚ passive volume attenuator • 2 x Input channels, 2 x Output channels • Combination XLR/1/4-inch (6.5mm) TRS, RCA, & 3.5mm input connectors • XLR outputs (balanced or unbalanced) • Mono/Stereo summing switch • System mute function • Built in headphone amplifier • Quality components and rugged construction • Desktop or Rack-mountable installation with included rack-mount hardware.
* Note: Please take into consideration your particular setup and cable arrangement when deciding on mounting your M-Patch with the highest degree of angle in relation to your desktop surface. You will need to ensure that you have enough space to connect your cables! PASSIVE VOLUME CONTROL MONITOR SWITCH Rack-mount configuration If you would like to rack-mount the M-Patch 2, simply connect the supplied rack/ stand ears to each side of the M-Patch 2 using the included screws.
Stereo Inputs The Stereo main inputs feature XLR bal/unbalanced combo connectors for Left &Right input signal. This input is perfect for connection to your main audio interface device (example; MBox 2, etc). Simply connect your cables directly to the unit with either XLR or 1/4” (6.5mm) TS/TRS cables. Aux Inputs The Aux input channel features 2 x RCA (L&R) and a stereo 1/8-inch (3.5 mm) mini-jack input. These connections are perfect for devices such as a CD players line output or an 1/8-inch (3.
Power Connection Power to the M-Patch 2 is required only if you wish to use the headphone amplifier, or view the illuminated led indicator lamps. The included power supply can be connected from mains power to the power connector socket located on the rear panel of the M-Patch 2. The Blue led on the front panel (next to the mono/stereo control switch) will illuminate when the external power supply is connected and mains power is present.
Input Volume Rotary Attenuator Controls The Aux input volume rotary attenuator control on the front panel of the M-Patch 2 adjusts the level of monitored output signal for devices connected to the Aux inputs (either the RCA or 1/8-inch, 3.5mm stereo min-jack) of the M-Patch 2. The stereo input volume attenuator on the front panel of the M-Patch 2 adjusts the level of monitored output signal for devices connected to the stereo inputs (Combination XLR/1/4-inch, 6.5mm TRS connectors) of the M-Patch 2.
Headphone Amplifier Volume Control and Output Connector A headphone amplifier is provided to allow monitoring of the audio signal selected by the 'Input Selection‘ control switches. Simply connect a pair of headphones to the 1/4” (6.5mm) TRS headphone connector socket and use the rotary headphone volume control knob to achieve the desired setting. * Note: Use of the headphone amplifier requires connection of the included external power supply.
Applications Soundcard, CD player, MP3 Player OUTPUTS Using the M-Patch 2 You can use M-Patch 2 to reduce the volume of analog audio signals in a range of applications. With its highINPUTS quality potentiometer, the M-Patch 2 passes signal more accurately, and sounds better than most built-in volume controls. Use the M-Patch 2 to attenuate the output of line level devices such the stereo outputs of a mixer or the outputs of a microphone preamplifier or equalizer. Inserted in INPUTS OUTPUTS a 5.
Specifications Audio Inputs: Input Connectors 1 2 x Combination XLR / 1/4-inch (6.5mm) Maximum Input Level > +26dB Input Connectors 2 1 x stereo RCA pair (L&R) Input Connectors 3 1 x stereo 1/8 inch (3.5mm) jack Audio Outputs: Output Connectors 1 Headphone Output: Output Connectors 2 x XLR output pairs (1-/L&R, 2-/L&R) 1 x 1/4” TRS stereo output Output Level >+26dB Impedance 0-5K ohms Headphone Output 1 x 1/4 in (6.
JBL Service Contact Information technical support If you have technical questions about your product or are experiencing difficulties we are happy to help. You can contact JBL Pro support by sending an email to: support@jblpro.com or by calling 1 (800) 8JBLPRO (800.853.5776) between the hours of 8:00 am and 5:00 pm Pacific Standard Time. repairs JBL Professional has an extensive network of authorized repair facilities in the US.
Product Warranty Information The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original purchase. Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.
Part Number: 5062310