Control 1 Pro Product User’s Guide Two-Way, Professional Compact Loudspeaker
Control 1 Pro Key Features • 150 Watts Continuous Power Handling • Professional Drivers and Crossover Network • Included Mounting Bracket • Transparent and Faithful Sonic Performance • Magnetically Shielded Enclosure • SonicGuard™ Overload Protection Your Control 1 Pro is a compact, highperformance professional loudspeaker system that features monitor-grade low and high frequency drivers coupled with a professional crossover network.
C) Mount the wall bracket plate (4) onto a flat sturdy surface using the appropriate mounting hardware for the surface. A safety cable (5) (not included) may be attached to the wall bracket via its eyelet (6) at one of the two lower screw mounting points or to a secondary point off the mounting plate. D) Next, slip the large molded nut (7) over the ball on the metal rod/ball assembly (1).
Specifications System: Frequency Range (-10 dB): Frequency Response (+/- 3 dB): 1 Power Capacity : 2 Sensitivity : 3 Maximum SPL : Directivity Factor (Q)2: Directivity Index (DI): Nominal Impedance: Crossover Frequency: Overload Protection: 80Hz - 20kHz 100Hz - 18kHz 150 W 87dB SPL, 1 W 1m (3.3 ft) 108dB continuous, 114dB peak 6.0 7.8dB 4 ohms 4.2kHz Full-range SonicGuard™ power limiting to protect network and transducers Transducers: LF Driver: HF Driver: 135mm (5.
