User's Manual

Congratulations on your purchase of the Wireless Mouse!
We hope you enjoy all the great features of the clock. To get the
most out of your Wireless Mouse please read this manual as it
provides tips and information about its various features.
Warning:
Replacement of batteries must be done by an adult.
Do not mix old and new batteries.
Do not mix the alkaline, standard (carbon-zinc) and
rechargeable (nickel-cadmium) batteries.
The supply terminals are not to be short-circuited.
Non-rechargeable batteries are not to be recharged.
Exhausted batteries are to be removed.
Only batteries of the equivalent type are to be used.
Batteries are to be inserted with the correct polarity.
Dispose of batteries properly.
Do not dispose of batteries in fire ; batteries may explode or leak.
Only use the adapter provided by the manufacturer.
The mouse takes 2 X AAA Batteries.
• Use this only as intended.
• To prevent fire or shock hazard, do not expose this unit
to rain or moisture.
• Do not submerge the unit in any liquid
• Do not disassemble
SAFETY TIPS:
Power Supply:
Battery Information:
Battery Compartment
Nano Receiver
On/Off
Button
• Nano receiver, plug-and-play
• Wireless carrier frequency: 2402MHz-2480MHz
• Perfect ergonomic design
• Zero delay 2.4GHz & 16 channel transmitted at the same time, to
provide a linear 10 meters effective operating distance.
• Super 5 class intelligent power-saving mode, a battery can up to
more than 6 months life
• GFSK / DSSS FM automatic function, anti-interference ability is
improved more than 8 times
• 1000 dpi high precision, optical tracking engine
• USB charging function, energy saving and environmental
protection
Technical Specifications:
• Available USB Port
• Windows
®
XP, Vista or Higher
• Macintosh OS 10.1 or Higher
System Requirements:
• Hold the mouse on both sides of the button, the battery cover can be
opened automatically.
• Put into two AAA alkaline batteries (enclosed in the package)
• Insert the mini receiver into the computer spare USB interface,
(suggested to insert on the front of the USB interface of computer,
if need to use the back of computer USB interface, suggest to use the
extended wire connection)
• Turn the On/Off Switch to On.
The mouse is all installed, please enjoy wireless fun!
Installation Steps:
USER GUIDE
2.4 GHz Wireless Mouse
© Jazwares, Inc. 2011
2.4 GHz Wireless Mouse with Nano Receiver
2 AAA Batteries
Instruction Manual
PACKAGE CONTENTS
* NOTE : After periods of inactivity, the mouse goes into sleep mode to conserve
battery life. To wake the mouse simply move it in any direction and it should
respond on the screen.
If the mouse is not working, please follow the next steps.
• Unplug receiver from computer terminal .
Put the receiver into the distance of the mouse within 30 cm.
While holding down the mouse left & right key and the wheel button 10 seconds.
At the same time, let go, quickly insert receiver into the computer terminal.
• Check the batteries, they may need to be replaced.
• If you are still having problems, restart your PC and allow it
to load up then check the mouse.
Trouble Shooting: