ENGLISH USER GUIDE
WELCOME In The Box. . ........................................................................................................................ 2 Charging / Battery Status................................................................................................ 3 Pairing. . ............................................................................................................................. 5 Finding Your Perfect Fit . . ...........................................................................
WELCOME THANKS FOR PURCHASING JAYBIRD X3. WE BRING MUSIC WHERE YOU SWEAT. For detailed video instructions please visit javybirdsport.com/support/ Please refer to the safety warnings for important product safety information prior to installation or use of the product.
Silicone Ear Fins (M) IN THE BOX USB Charging Cable + Charge Clip Silicone Ear Tips (M) Cord Clips Silicone Ear Fins (S, L) Silicone Ear Tips (S, L) Carry Pouch Volume + Power Microphone ComplyTM Isolation Ear Tips (S, M, L) Volume LED Shirt Clip 2
CHARGING/BATTERY STATUS We recommend you charge your buds through any 5V 500mA USB power source. Wall/car adapters/chargers that supply more than 5.5 Volt will damage your Jaybird buds and should not be used. A Take your included charge clip and USB cable and plug it into a USB power source. 2.5 hours charging gives 8 hours of playtime. 3 20 mins charging gives 1 hour of play time. B The red LED will show when charging, and will turn to green when fully charged.
CHARGING/BATTERY STATUS When not playing music, pressing Volume + or Volume – will announce the battery level.* The LED will indicate a single green flash for more than 10% battery remaining and a single red flash when below 10%. Your phone and the MySound App will also indicate battery status. 4 * S tandby Mode: Powered and not playing music or on a phone call.
PAIRING 5 A On your phone/music device, turn Bluetooth on and ensure it is actively searching for Bluetooth devices. B With your X3 turned off, press and hold the Power Button until you see the LED flashing red/green.
PAIRING C Select “Jaybird X3” in the list of discovered devices. D X3 voice prompt will say: “HEADPHONES CONNECTED”. You are now ready to listen to your music If the pairing is not successful, switch off your buds by pressing the Power Button until you hear “POWER OFF” and repeat the steps outlined above. 6 NOTE: When you turn your X3 buds on for the first time or after a reset, they will be in pairing mode.
FINDING YOUR PERFECT FIT CHOOSING YOUR SETUP BASED ON USE We recommend choosing a fit based on how you plan to use your Jaybird X3.
FINDING YOUR PERFECT FIT 1. SET UP YOUR FINS A 8 Lay your X3 in front of you with the inline remote on the left hand side. Swap the fins to the opposite side so the fin with the ‘L’ is now on the side with the inline remote. B Rotate the fins so they are pointing towards the cable, as shown. C Place your X3 over your ear with the inline remote on your left side.
FINDING YOUR PERFECT FIT 2. FINDING THE RIGHT SIZED TIPS AND FINS 9 A Starting with the medium-sized tips and fins attached, try placing your buds firmly within your ear while in the over-ear position. B If your buds are not comfortable, or feel loose, try alternative sized tips and/or fins. You can also try the ComplyTM foam tips or remove the fins completely. Be patient, it may take some time to get the perfect fit. C Once you are happy with the fit, move onto step 3.
FINDING YOUR PERFECT FIT 3. CORD CLIPS 10 A Lay your X3 in front of you and fit the cord clips as shown. B Find the right cord length to get a snug fit, with no excess slack, around the back of your head by pulling the top and bottom cord outwards. C Insert the last loop into the cord clip and pull firmly.
FINDING YOUR PERFECT FIT If you intend to use Jaybird X3 for casual use, we recommend the under-ear setup.
FINDING YOUR PERFECT FIT 1. FINDING THE RIGHT SIZED TIPS AND FINS LEFT RIGHT 12 A With the medium-sized tips and fins attached, place your buds firmly within your ear while in the under-ear position. The inline remote should be on the right side. B If your buds are not comfortable, or feel loose, try alternative sized tips and/or fins. You can also try the ComplyTM foam tips or remove the fins completely. Be patient, it may take some time to get the perfect fit.
FINDING YOUR PERFECT FIT 2. SHIRT CLIP Use the included Shirt clip To secure your X3 buds to the back of your shirt. Long side of the clip on the outside of the shirt.
DETAILED INSTRUCTIONS BUTTON FUNCTIONALITY ON/OFF To turn X3 on or off, press and hold the Power Button for about 4 seconds. A voice prompt will say “POWER ON” or “POWER OFF”.
DETAILED INSTRUCTIONS SHORT PRESS 1 SEC PRESS PLAYING MUSIC VOLUME + SKIP FORWARD PLAY / PAUSE VOICE COMMANDS VOLUME - SKIP BACKWARD Play or pause, a song or video with a short press and release of the Power Button. To skip a song, press the Vol. + button for 1 second. To go backwards, press the Vol. - button for 1 second. To change the volume + or -, short press the Vol. + or Vol. - button To activate voice commands, (Siri or Google Now), press the Power Button for 1 second.
DETAILED INSTRUCTIONS SHORT PRESS 1 SEC PRESS DOUBLE PRESS PHONE CALLS SWITCH A CALL ACCEPT A CALL DECLINE A CALL REDIAL MUTE / UNMUTE Accept a phone call, with a short press of the Power Button. To decline a phone call, press the Power Button for 1 second. To mute or unmute, a call press the Vol. - button for 1 second. To redial, a phone number you can double press the Power Button.* To switch a call from your phone speaker to your X3 buds short press the Vol. + button.
DETAILED INSTRUCTIONS THE MYSOUND APP MySound lets you customize the sound profile on your X3 buds. Your new sound settings are saved right on your buds, so you can take your custom sound with you no matter where you go with any device you use.
DETAILED INSTRUCTIONS SAVE THE MYSOUND APP SAVE SOUND Customize your sound settings. Changes are saved to your X3 buds. MUSIC NOTE: The MySound app works with Jaybird X3 and Freedom. Other manufacturers and older Jaybird buds are not supported. Adding additional bass to your sound profile through the MySound app will reduce play time. 18 Save your new preset to your dashboard for easy access to all your favorite sound settings. HISTORY Indicates if music is playing on your device.
DETAILED INSTRUCTIONS MULTIPOINT - CONNECTION TO MULTIPLE DEVICES Multipoint allows you to be connected to two devices simultaneously. You can for instance be connected to your laptop and your mobile phone. While listening to music on your laptop you will be able to accept an incoming call on your phone. 1 E nsure your X3 buds are paired and connected to both devices. Follow pairing instructions on page 5-6.
DETAILED INSTRUCTIONS SHARE ME The ShareMe feature allows you to share the music you are listening to with another pair of X3 buds. ON A 20 Power on both pairs of X3 buds. B Only connect one device to your music device. Ensure the second device is not connected to any Bluetooth device.
DETAILED INSTRUCTIONS SHARE ME The ShareMe feature allows you to share the music you are listening to with another pair of X3 buds. HOLD C 21 Press and hold ‘VOL +’ on the connected buds, while you press and hold the ‘VOL -’ on the second buds until the LEDs on both buds are flashing red/green. D Both buds will be connected when the LEDs stop flashing and you will hear ‘Headphones Connected’. Play some music and enjoy the shared experience.
DETAILED INSTRUCTIONS SMARTWATCHES With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair X3 to your smartwatch. Use your smartwatch user manual for instructions on how to pair a Bluetooth device.
TROUBLESHOOTING If your buds are not responding, connect the charge clip and USB cable to a power source. This will turn your buds off and perform a soft reset. If this does not resolve your problem we recommend to reset your buds to their original factory Settings. 1 ut your buds in pairing P mode. Turn the buds off, then press and hold the Power Button for more than 4 sec until you see alternating red/green LED. 2 While the LED is flashing red / green double press the Power Button.
SPECIFICATIONS Bluetooth Version 4.1, Multipoint Codec AAC, SBC, Modified SBC Profile Handsfree, Headset, A2DP, AVCRP, SPP Effective Range 10 meters (30 feet) Play Time 8 Hrs* Standby Time 110 Hrs* Power Bluetooth headset: 5.0V Charging Time 2.5 Hrs Quick Charge 20 Min = 1 Hr play time Dimensions 27 x 24 mm earbud size, 490 mm cord length Weight Approx 13 g , 0.5A * P lay time and standby time may vary due to usage conditions.
WARRANTY, WARNINGS & SAFETY Full warranty, care & maintenance details at: jaybirdsport.com/warranty +1.866.244.3399 WARNING: Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use.
LISTEN RESPONSIBLY Avoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels may cause permanent hearing disability. Do not use around road traffic. Video instructions at jaybirdsport.
