Push upConnectTM User manual Model: JJ15002 一、Product overviews Thanks for selecting Pushup bar, an innovative training tool designed to help you achieve your fitness goals. It can records the number of Push-ups you done .
can be displayed on the LCD digital display. And the exercise data can be uploaded to the APP through Bluetooth. You can check some information like exercise times, time, energy consumption and ect from the App. This product manual will make you better understand the Pushup Bar. Please keep it for future reference. This product needs to be charged and activated before first use. It is recommended to fully charge the battery before use. • This product is not exercise data.
First of all, open the carton box and take out all the components to put them on a level surface. Please make sure all the components here. If you find any component missing, please feel to contact us. You can contact us by the following way: 1. Please return the product to the point of purchase for refund. 2. Please contact customer service on official website, Website add: 3. Please dial customer Service Hotline: • LCD 1. Reps 2.Times 3. Set 4. Battery 5.
When the Pushup bar is charging, the battery symbol will be animated,And after being charged, the battery symbol will be fully displayed. After touching, the Pushup bar will wake up and the Back light will be on, battery symbol 100% fully charged The battery status displayed on the screen is as follows: More than 75 per cent Below 25% Over 50 per cent Over 25 per cent 4-3.How to install the handle to the base. 1. Hold a handle in each hand and place the push-up handle vertically downward on the base.
4-4. Adjust the handle. Lift the handle up, and then install it vertically down to the hole suitable for your fitness. If there is a click sound during the operation, the handle will be stuck. If there is no click sound, turn left and right of the handle before you hear the sound. 4-5. Remove the handle. 1. The handle can be lifted up vertically to remove the handle.
五、Download the installation APP You can search ”JAXJOX ”in the apple store. And then click and install it. 六、Bluetooth Connection Turn on the bluetooth. Open the APP Connect the device, check the data from the app. Note: The screen displays the Bluetooth connection status. The Bluetooth symbol flashes to indicate that the Pushup bar is not connected, and the Bluetooth symbol stays on the screen to indicate that the Pushup bar is connected successfully. 34 七、Method of use 7-1. Start Push-up.
-2. Timing, Counting, Sets. The current set is ended after 6S without doing exercise, and the displayed data will be automatically cleared if there is no operation for 2 minutes. The new set will update the related display from the second push-up. Note: Before doing exercise, the following conditioin may affect the counts.
八、Reset the Pushup Bar After 2 minutes without any operation, the device will automatically reset.
• • • Turn off and restart your mobile phone's Bluetooth Reboot your mobile phone Reset the Pushup bar and reconnect Bluetooth Product Parameter • • • • Bluetooth 5.0, transmission distance range is over 30m. Using rechargeable lithium batteries Backlight LED The LCD will automatically turn off in 20 seconds when no one touches it.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.