Provide customers with the most cost-effective products and services! JAVS18-2011SG2 IOT Real-time Body Temperature Measurement Wristband Tag Shenzhen Javs Technology Co.,Ltd www.javs-rfid.
1. Product Overviews Temperature sensors JAVS18-2011SG2 IOT real-time temperature monitoring wristband tag is a real-time temperature monitoring wristband developed for the epidemic of infectious viruses. Features of the product: high measurement accuracy (0.1 ℃), multiple functions, strong real-time, big data collection. Use to control the infection of virus; analyze the development trend of virus; track the contact personnel.
2. Product Functions and Compositions 2.1 产品实现的主要功能 ➢ ➢ ➢ ➢ ➢ ➢ ➢ Temperature measurement and monitoring ； Date、Time、Week display on the LCD ； Electric quantity display on the LCD； 2.4G RFID Attendance and positioning ； NFC； Battery charging ； Color LCD display. 2.2 Product Compositions 2.
3. Product Instructions 3.
3.2 Wearing method When wearing the bracelet, the face of the temperature sensor must be worn on the inner side of the wrist, and the tight point shall be worn to ensure good contact between the temperature sensor and the skin. Avoid incorrect measurement data. The temperature sensor face must be worn on the inside of the wrist Figure 3-1： Figure of correct wrist wear In order to save power, the bracelet is usually in the screen saver state. If you need to view data, touch the key with your finger.
3.3 Charging method Step 1: remove the temperature measurement body from the bracelet. The removal direction is shown in the figure below. Figure 3-3： Take down the main method diagram of temperature measurement Step 2: insert the charging line into the temperature measurement body, and insert the other end of the charging line into the charging adapter of the mobile phone (the product does not come with its own power adapter).
Step 3: when charging, the battery will show green status. White when full, the battery will show white status. Figure 3-4： When charging, the battery is green Figure 3-5： When charging is complete, the battery is displayed in white. Step 4: after charging, install the temperature measurement body back into the bracelet.
3.4 Manual clock calibration method Step 1: within 1 second, touch the touch key 3 times or more to enter the manual calibration. In one second, touch the touch key 3 times or more by hand. Figure 3-7： Manual timing method Step 2: press the key once every 2 seconds, the current number (red indicates the current operation bit) plus 1; if you press twice or more times in 1 second, the current operation bit moves forward one bit.
When pressing the key twice, the operation result: the operation position moves down one bit The red character indicates the current operation bit. Figure 3-9： When pressing the key twice, the operation result When setting the week, press the key twice to finish the setting. Return to normal. The red character indicates the current operation bit. Figure 3-10： End operation steps 3.
4. Bracelet connected to the Internet of things After the temperature data collected by the bracelet is connected to the Internet of things, a large number of valuable data have been formed. Through the analysis of big data, it can predict the development direction of the disease and avoid the occurrence of disasters. 图3-11：手环接入物联网图 After connecting to the Internet of things, the bracelet can automatically calibrate the time and temperature.
5. Product technical parameters ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ Working frequency: 2.4ghz-2.5ghz; Working mode: active; Product type: wristband type tag; Tag agreement: JAVS enterprise agreement standard; Read tag capacity at the same time: more than 2000; Card reading distance: up to 250m; Recognition accuracy: 99.
6. Product use scenario description 6.
6.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
