von-STD(JTBT2200) Manual Instruction
von-STD(JTBT2200) Information • • • • • • 1 Certified Business Name: Jastec Co.,Ltd. Device (model): Wireless data communication system wireless transmitter(JTBT2200) Manufactured date: April, 2012 Manufacturer/country : Jastec Co,Ltd./Korea Certified code : JS0 A radio interference of this wireless module is not providing a service related the safety of life.
Cautions For Safety We kindly recommend you to be fully aware of using a product accurately and for safety of user. All liabilities by uncomplying cautions are not supposed to be responsible to manufacturer. 1. This product into water or prolonged exposure to moisture can cause failure resulting in no charge for broken A/S. 2. Do not disassemble or repair this product if the label seal is broken or damaged, free A/S will not be received. 3.
1. von-STD(JTBT2200) Descriptions 1.1 Overview von-STD(JTBT2200) as vehicle driving logs tracker designed to collect a vehicle driving information from ECU(Electronic Control Unit) By OBD standard protocol communication and can be saved a driving logs by connecting to PC.
1. von-STD(JTBT2200) Descriptions 1.2 Specifications 4 In-vehicle Protocol ISO 9141-2, ISO 14230-4(KWP-2000), ISO15765-4(CAN) J1850(PVM/VPW) protocol supported, physical communication standard followed and high credibility being with vehicle DB. 32 bit main processor Boasting fast and stable performance ARMv7 Cortex-M3 CPU has adopted.
1. von-STD(JTBT2200) Descriptions 1.3 Functions Saving vehicle information. Collecting and saving driving logs information.
1. von-STD(JTBT2200) Descriptions 1.4 Specification External interface specification Specification CPU 32 bit ARMv7 Cortex-M3 Memory 4 MB Internal Flash Memory LED Display LED CAN[Control Area Network]: ISO 11898 / Vehicle protocol ISO 9141-2 / ISO 14230 [KWP 2000] / SAE J1850 (PWM / VPW) Connector type SAE J1962 OBD-II 16Pin Standard Connector Power DC 12V vehicle, USB 5.
1. von-STD(JTBT2200) Descriptions 1.5 Composition Name 7 Function OBD II module (body) Connection to vehicle OBD II connector. USB cable Use for uploading the driving logs data by PC connection. Quick Start Manual Quick guide manual Program installation CD von-S PC Manager installation program, included in user’s manual.
1. von-STD(JTBT2200) Descriptions 1.6 Body description 8 Front display LED Red/Blue/White display LED OBD connector Connect to vehicle OBD diagnostic port with SAE J1962 OBD-II 16Pin standard connector.
2. Product Instructions 2.1 von-STD(JTBT2200) installation [Vehicle OBD diagnostic Connector] Min. 20cm von-STD(JTBT2200) installation is following below order. 1. von-STD(JTBT2200) installation requires after vehicle parking in safety area. ** Caution : A side brake or foot brake should be locked and shift also checked on the parking position. 2. 3. 4.
2. Product Instructions 5. Connect vehicle OBD diagnostic connector and von-STD(JTBT2200) connector. 6. Green LED of von-STD(JTBT2200) will be blinked every 1 second. 7. Red or Green LED lamp will be continually blinked within 1 minute after ignition on. 8. After checking normal installation, green LED lamp blinks every 1 second after ignition off and All LED lamps will be turn off later [saving mode] 2.
2. Product Instructions 2.3 OBD II module separation ** Caution : OBD II module separation should be performed at safety area after parking. ** Caution : The separation from vehicle is prohibited if not the purpose of driving data saving or transmitting. ** Caution : Performing OBD II module separation on ignition on may be caused to data loss or module damaged. 1. 2. 11 Turn vehicle ignition off. Pull OBD II module from vehicle OBD diagnostic connector then separating it.
2. Product Instructions 2.4 Driving log data saving and transmitting 1. Preparation 1) PC manager program needs to install to save the driving logs data recorded from OBD II module. * Tip : A program installation manual is available [3. PC Manager installation manual(31~34 page)] 2) Please separate OBD II module from vehicle. [2.6 module separation (21 page)] ** Caution : Vehicle data on the status of connecting to vehicle can not be transmitted by USB cable. Please separate OBD II module from vehicle.
3. Warranty & After Sale Service 3.1 Before A/S request service **Caution : Driving logs data should be saved certainly in advance for A/S request if a product’s defect checked. 13 Power and LED status off Check OBD II module and 16 pin connector connection status. Not connected to PC Check PC USB port and OBD II module connection status and PC USB port status.
3. Warranty & After Sale Service 3.2 Warranty Service 1. Warranty Period : 1 year 2. Warranty Details 1) Any defective or damage within warranty period can be repaired free A/S service or exchanged as free of charge. 2) Any damage or defective by customer’s misuse is not allowed free exchange or free charged A/S service. 3. Exchange and Return 1) An exchange or return is possible within 1 week after purchase if not opening box.
FCC Information 15