con-STD Information i Certified Business Name: Caste : . . Device (model): Wireless data communication system wireless : Do. Manufactured date: April, 2031 . 3. Manufacturer/country : Caste i ©» Certified code : JSO radio interference of this wireless module is not providing a service related the safety of life.
Cautions For Safety We kindly recommend you to be fully aware of using a product accurately and for safety of user. All liabilities by noncomplying cautions are not supposed to be responsible to manufacturer, . This product into water or prolonged exposure to moisture can cause failure resulting in no charge for broken A/S, . Do not disassemble or repair this product if the label seal is broken or damaged, free A/S will not be received. .
1. con-STD Descriptions 1.
1. con-STD Descriptions 1.2 Specifications In-vehicle Protocol ISO 9141-2, ISO protocol supported, physical communication tenderness followed and high credibility being with vehicle D8. 32 bit main processor Boasting fest and stable performance Arm Cortex-M CPU has adopted. Stability real-time operating stern System hardware applications, databases data communications and other resources efficiently and reliably manages the real-time operating system is used based on Tiny.
1. con-STD Descriptions 1.3 Functions Driving logs record Saving vehicle information. : Collecting and saving driving logs information.
1. con-STD Descriptions 1.4 Composition N, 2 Function QBD I module body) Connection to vehicle OBD II connector. USB cable or Use for uploading the driving logs data by PC connection. Quick Start Manual or Quick guide manual Program installation CD con-S PC Manager installation program, included in user's manual.
1. con-STD Descriptions 1.
2. Product Instructions 2.1 OBD II module installation 0BD I module installation is following below order. i. OBD II module installation requires after vehicle parking in safety area. wx gn Caution © A side brake or foot brake should be jacked and shift alas checked on the par Please check vehicle engine should be off when if ignition on Check the position of vehicle OBD diagnostic connector.
2. Product instructions 2.1 OBD II module installation OBD I module installation is following below order, 4. Connect vehicle OBD diagnostic connector and OBD II module connector, 5. Green LED of OBD Il module will be blinked every 1 second. 6. Red or Green LED lamp will be continually blinked within 1 minute after ignition on. 7. After checking normal installation, green LED lamp blinks every 1 second after ignition off and All LED lamps will be turn off later [saving mode] 2.2 LED display status TR = OFF.
2. Product Instructions 2.3 OBD II module separation * Caution © OBD module separation should be performed at safety area after park ** Caution ¢ parathion from vehicle is prohibited If not the purpose of driving d g or transmitting ** Caution arming OBD IE module separation on ignition on m oss or module damaged 1. Turn vehicle ignition off, 2. Pull OBD IT module from vehicle OBD diagnostic connector then separating it.
2. Product Instructions 2.4 Driving log data saving and transmitting 1. Preparation 1) PC manager program needs to install to save the driving logs data recorded from OBD II module. * Tip : A program installation manual is available {3. PC Manager installation page] 2) Please separate OBD I module from vehicle. [2.6 module separation (21 page)} ** Caution : Vehicle date on the status of connecting fo vehicle can not be grant QBD I mauled from vehicle, ed by USE ¢ 2.
3. Warranty & After Sale Service 3.1 Before A/S request service **Caution : Driving logs data should be saved certainly in advance for AS > request i ifa product s defect checked. Power: and: LED st ; is Sif Check PC Use port and OED I module connection | status and PC USB port status. Not connected. to PC “Not connecting 80.
3. Warranty & After Sale Service 3.2 Warranty Service 1. Warranty Period © 1 year 2, Warranty Details 1) Any defective or damage within warranty period can be repaired free A/S service or exchanged as free of charge. 2) Any damage or defective by customer's misuse is not allowed free exchange or free charged A/S service. 3. Exchange and Return 1) An exchange or return is possible within 1 week after purchase if not opening box.