Operating Manual
TABLE OF CONTENTS IMPORTANT NOTICE....…………………………………………………. I. OUTLINE ……………………………………………….………………. 1. COMPONENTS…………………………………………………………………… 1.1 Components Table……………………………………………….…………………. 1.2 Connection System ………………………………………………………………… 2. FEATURES & FUNCIONS……………………………………………………. 2.1 Features ………………………………………………………………………………… 2.2 Functions ……………………………………………………………………………… 3. SPECIFICATION………………………………………………………………. 3.1 Main Body………………………………………………………………………………… 3.2 Wireless Diagnostic Module……………………………………………………. 3.
9.1 Installation and Removal …………………………………………… 9.2 Program Card…………………………………………………............ II. HOW TO USE……………………………………………………………. 1. POWER ON/OFF…………………………………………………………………. 2. MENU…………………………………………………………………………………. 2.1 MAIN MENU ….……….…………….……….…………………………………………. 2.2 SYSTEM MENU….……….………. …………………………………………………… 2.3 PRINT….……….……………………………………………………………………………. 2.4 DOWNLOAD….……….… …………………….…………………….………………. 2.5 QUICK START….……….……………………………………………………………… 2.6 POWER….……….…………………………………………………….………………... 2.7 Tool Info.
FOREWORD Today, we are entering a new paradigm with the advent of the ubiquitous society, which is rapidly changing our lifestyle with intelligent, networked, and wireless systems. Cars have also been developed into “intelligent” vehicles that feature better stability and driving efficiency by applying topnotch electric and electronic control system, no longer requiring physical control.
IMPORTANT NOTICE Please read and follow the following warnings and precautions for the safe and effective use of the Car-Doctor. Any defect or damage caused by misuse of the product cannot be covered by the warranty for free A/S. WARNING! 1. Use the battery carefully; it may explode or cause fire. z Do not subject it to excessive shock or puncture it. z Do not put it in high-temperature areas or subject it to heat. z Do not let it get wet and be sunk under water.
FCC NOTICE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This devices may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules.
I. OUTLINE USB 12Mbps 2.4GHz Wireless Communication Wireless Module Wireless Automotive Scanner Diagnostic Communication [Picture I-1.
1. COMPONENTS F4 F3 F2 F1 ESC U MEN ▲ ▶ ENT ◀ ▼ PWR DIAG [Picture I-2.
1.1 Components Table NO Component Name Component No.
18 Benz 38P Adaptor(Optional) 068-E0004 ※ Diagnostic adaptors and cables of No. 7 and 16 may vary depending on product type. 1. 2 Connection System [Picture I-3.
2. FEATURES AND FUNCTIONS 2.1 Features 1) Wireless Communication System Through the high-speed data transmission function and the application of highly stable wireless system, the Car-Doctor can diagnose a car in close range while moving. 2) 32-BIT High-performance CPU The 32-BIT high-speed CPU enables faster and more accurate processing of data, and to have various itemized data that are helpful in identifying source in defects diagnosis.
Handy-type design, high-resolution and easy-to-use LCD that is small and light, with soft-touch key pad and large buttons for easy usage. 2.
3.1 Main Body Dark gray and blue, Dual injection Case Interior: ABS material; Exterior : Urethane Monochrome graphic LCD (Resolution: 320 × 240) Display Power LED (Red/Green), Communication LED (Red/Green ) Key Pad Material: Rubber Function Keys: 4; Operation Keys: 4; Direction Keys: 4; Power Key: 1 32-Bit High Performance CPU Main CPU Main Clock: 200 MHz (Max. 266 MHz) OS Embedded Linux 2.4 Type: Flash Memory Card Program Card Basic 128 MB (can be expanded up to 256/512 MB) Frequency : sharing 2.
3.2 Wireless Diagnostic Module Dark gray and blue, Dual injection Case Interior: ABS material; Exterior : Urethane Display Power LED (Red/Green), Communication LED (Red/Green ) Frequency : sharing 2.4-GHz frequency band Wireless Communication Speed: 125 K–1 Mbps Ultra-sensitive Built-in Antenna , 90˚ rotation 26 PIN Input/Output Terminal (power input, communication input/output ) Vehicle Communication Supporting all the vehicle interfaces including NRZ, UART, RS232C, CAN, PWM, VPWM, CLOCK, and PULSE.
4. Main Body 4.1 External Shape ① LCD Screen ⑤ RS-232 Port ⑧Main Body Support ② Key Pad ⑥ USB Port ⑨Rechargeable Battery ③Status LED Display ⑦ Program Card Slot ④ Power Connector [Picture I-4.
4.2 Key Pad Components F1 F2 F3 F4 MENU ESC ▲ ◀ ENT ▶ ▼ DIAG PWR ① Function Key F1,F2,F3, F4 ④ Direction Key W, X, S, T ② MENU Key ⑤ ENTER Key ENT ③ ESC Key ⑥ Diagnosis Key DIAG [Picture I-5. Key Pad] 4.
Component Function Four function keys are located on right below the LCD screen. Because the functions vary according to each mode, the mechanic can select the desired item and display it at each mode.
PWR COM ① PWR: Power LED ② COM: Communication LED [Picture I-6. LED Display] 4.4.
5.1 External Shape & Connection ① Status LED Display ③ Main Connector (26 PIN) ② Antenna ④ Main Cable (26–19 PIN) ⑤ Car Adaptor [Picture I-7. Wireless Module] Connection Sequence ① Connect main cable 26-pin connector to the main connector (put it to full until it is clicked). ② Connect the car adaptor to the main cable 19-pin adaptor.
5.2 Status LED Display ① PWR: Power LED ② COM: Communication LED [Picture I-8. Status LED Display] 5.2.1 PWR LED: Red LED Display the current power state. If the power is turned on, the red light comes on. 5.2.2 COM LED: Upper Right Display the current vehicle communication status.
① Cigar Lighter Cable ② Main Cable ③ Car Adaptor [Picture I-9. Vehicle Connection] Picture 1-9 shows how to connect the Car-Doctor to the diagnostic connector of the vehicle. ; Connect cable to the diagnostic connector of vehicle ; KEY-ON vehicle or start the vehicle ; If normally connected, PWR LED lights red Note : It is not needed to connect the cigar lighter cable in diagnosing and checking the vehicle, because the vehicle battery power is supplied to the wireless module.
5.4 Cigar Lighter Power Supply ① Main Cable ② Cigar Lighter Cable DC Jack [Picture I-10. Cigar Lighter Power Connection] The wireless module receives the battery power of the vehicle through the main cable. However, power may not output through the diagnostic connector in some vehicles. In this case, its power can be supplied by connecting the cigar lighter cable. 6.
① USB-B Connector ② USB Cable ③ USB-A Connector [Picture I-11. Computer Connection] The Car-Doctor supports the communication with the computer with its expanded function. Connection Method ; Insert the B connector of the cable into the USB connector on the upper side of the main body.
① Power Supply Jack ② AC/DC Power Adaptor ③ AC Power Plug [Picture I-12. AC/DC Power Adaptor] ; AC/DC power adaptor is used for charging and external power supply. ; Input: AC 100–230V, 50/60Hz ; Output: DC 12V/1.2A CAUTION! Please use only the AC/DC power adaptor provided with the device. Unauthorized products may seriously damage the equipment. We are not responsible for any defect caused by using other products or power adaptors.
8. RECHARGEABLE BATTERY 8.1 Insertion and Removal ① Lock Lever ③ Charger ② Rechargeable Battery ④ PWR LED [Picture I-13. Battery Insertion/Removal] ; Removal: Push up the lock lever on the back of the main body as seen in the above picture, then slightly pull the upper part of the battery. ; Charging: Insert the battery as seen in the above picture to begin charging. In case the insertion is properly done, the PWR LED turns on.
with each other. Press the battery firmly until the lock lever clicks. If the battery is not firmly in place and falls out, it may be damaged. 8.2 Charging ① AC/DC Power Adaptor DC Jack [Picture I-14. Power Connection for Charging] The Car-Doctor can be also charged in its main body. In addition, it can be charged with the provided charger and back-up battery. Charging Method ; Supply power by connecting AC/DC power adaptor. ; Charging is available while using the main body.
Yellow Lighting Fully charged state (completed) ; If charging is completed, use the battery after pulling out AC/DC power adaptor. ※ Both the main body and charger have a built-in protection circuit, which prevents the battery from overheating due to excessive charging (prevents from overheating and explosion). 8.3 Li-ion Rechargeable Battery 8.3.
9. PROGRAM CARD 9.1 Installation and Removal ① Program Card ② Card Protection Cover ③ Card Connector [Picture I-15. Program Card Installation] Program Card Removal ; After turning off the power, open the card protection cover downwards and pull out the end of the program card inserted in connector. Program Card Installation ; Insert the program card in the connector as seen in the above picture. ; Turn on the power.
Note: Data Back-up If there's stored data, transmit and save the data to the computer (by uploading through USB), and replace the program card. 9.2 Program Card The program card has built-in flash memory. With the high capacity of basic 128 MB, one card is enough for the diagnosis and data storage. Power: 3 V (3.3 V) Size (P x L x H): 20 mm x 25 mm x 1.
II. HOW TO USE 1. POWER ON/OFF Press the power key on the lower left side to turn on the power and boot up the Car-Doctor. 1.1 Booting Turning on the device boots up the Car-Doctor. Boot Screen Æ During boot up of the OS…. Æ During boot up of application…. Æ During boot up of database…. It takes approximately 50-60 seconds to complete the boot up. Do not turn off or operate the Car-Doctor during boot up.
1.2 Power Off Press the power key, and the screen as shown below will be displayed. Select "POWER OFF" in the middle by pressing Left/Right (W / X) key to turn off the power. Selecting “LCD OFF” turns off the LCD by the power-saving function. The powersaving function enables longer use of the Car-Doctor. If you want to use it again, just press any key to turn on the LCD. Picture 1 [Power Off Screen] Note: Press the power key of the Car-Doctor for 4–5 seconds to force shutting off the power.
2. MENU How to Select: Press the Menu key, and the menu item will pop up in a box on the lower left. Picture 2.1 [Menu Screen] The menu item appears by pressing the MENU on the key pad. This menu item includes: 1. MAIN MENU 2. SYSTEM MENU 3. PRINT 4. DOWNLOAD 5. QUICK START 6. POWER 7. TOOL INFO By using this menu item, the user can shift to the diagnosis or system setup screen. QUICK START is to instantly run user’s preset item. The following are the details on each menu item.
2.1 MAIN MENU Select MAIN MENU. Picture 2.2 [The screen after selecting Main Menu] The MAIN MENU shows car makers that the user may choose corresponding to the vehicle to diagnose. Press the Enter key ( ) after selecting MAIN MENU to go to the screen of car maker selection.
2.2. SYSTEM MENU Select SYSTEM MENU. Picture 2.3 [SYSTEM Setup Screen] The system-related mode of the Car-Doctor gives the information on the equipment of the main body and memory capacity. With this mode, one can check and adjust settings for brightness/contrast, clock, battery info, LCD test, buzzer, and RF test. It plays an important role in effective maintenance. 2.3 PRINT Select PRINT. This is the mode that allows the user to save the current screen on the LCD.
2.5 QUICK START How to Select: Press the Menu key, and select QUICK START. Picture 2.4 [The screen after selecting QUICK START] QUICK START allows the user to save the item that was recently diagnosed. The Car-Doctor should be used at least once to use QUICK START. The Car-Doctor saves the last diagnosed item, and QUICK START enables to directly run the saved item. The above picture shows the screen when QUICK START is selected.
2.6 POWER Select POWER. Picture 2.5 [Power Key Screen] By selecting POWER, it shows the LCD OFF, POWER OFF, and CANCEL items. LCD turns off when chose LCD OFF menu. To switch on the LCD, just press the Enter key ( ). To turn off the main body, select the POWER OFF Key.
2.7 TOOL INFO. How to Select: Press the Menu key, and select TOOL INFO. Picture 2.6 [TOOL INFO screen] The TOOL INFO displays the Car-Doctor-related information on equipment, version, and DB, etc. This item can also be accessed by selecting the TOOL Info icon on the SYSTEM MENU.
3. MAIN MENU (DIAGNOSIS) 3.1 Car Selection The following is the flowchart of Car-Doctor’s diagnosis. It is composed of car maker selection menu, car selection menu, diagnosis item selection, and detailed item selection. [Car Maker Selection] Picture 3.1 [Maker Menu Screen] When the user runs the Car-Doctor, the first screen that appears is the car maker menu. In this screen, press Enter key ( ) after selecting the maker of the car the user wants to diagnose.
[Car Selection] Picture 3.2 [Vehicle Selection Screen] This screen displays the list of different car models under a particular car maker. After selecting a car to be diagnosed, please press the Enter key ( ).
[System Selection] Picture 3.3 [Diagnosis Items] The above screen lists the diagnosable systems of the selected car. Select the system you want to diagnose, and press the Enter key ( ).
[Detailed Item Selection] Picture 3.4 [Detailed Item Selection] The above screen shows the detailed items of car. After selecting one of the items to be diagnosed, please press the Enter key ( ).
[Diagnosable Item Selection] Picture 3.5 [Diagnosis Item on Engine Type 2.0] The above screen shows the items that can be diagnosed.
3.2 Self-Diagnosis [Car Maker Selection] → [Car Selection] → [System Selection] → [Detailed Item Selection] → [Diagnosable Item Selection] → [1. SelfDiagnosis Selection] Selecting a detailed item in picture 3.4 displays the diagnosable items, as seen in picture 3.5. Select Self-Diagnosis item among the diagnosable items. [Self-Diagnosis] Picture 3.6 [Diagnosis Code Output Screen] In case an error occurs with the selected ECM, the fault code is displayed in the screen.
3.2 Service Data [Car Maker Selection] → [Car Selection] → [System Selection] → [Detailed Item Selection] → [Diagnosable Item Selection] → [2. Service Data Selection] Selecting the detailed item in picture 3.4 shows the diagnosable items as seen in picture 3.5. Select Service Data item among the diagnosable items. [Service Data] Picture 3.7 [Sensor Data Output Screen] Picture 3.7 is the output screen on the service data. This item displays the data of various kinds of sensors.
3.3 How to Use the Actuator Mode [Car Maker Selection] → [Car Selection] → [System Selection] → [Detailed Item Selection] → [Diagnosable Item Selection] → [3. Actuator Selection] Selecting the detailed item in picture 3.4 shows the diagnosable items as seen in picture 3.5. Select Actuator item among the diagnosable items. Picture 3.8 [Actuator Items] This is the mode to forcibly start and stop the actuator using the Car-Doctor.
Picture 3.9 [Actuator Start/Stop] Change the vehicle status into the status specified in the test conditions before the actuator test. In case there’s test time, press the F1 START button, and the actuator will be operated during the test time and will automatically stop. In case there’s no test time, press the F1 START button to begin the test, and press F2 STOP to finish the test.
3.4 ECU ID Check [Car Maker Selection] → [Car Selection] → [System Selection] → [Detailed Item Selection] → [Diagnosable Item Selection] → [4. ECU ID Check Selection] Selecting the detailed item in picture 3.4 shows the diagnosable items as seen in picture 3.5. Select ECU ID Check item among the diagnosable items. Picture 3.10 [ECU ID] Select ECU ID Check to see the information of the relevant ECU.
4. SYSTEM MENU 4.1 LCD Brightness Control & Save Mode Time Setting Select contrast icon on the SYSTEM MENU. Picture 4.1 [LCD Brightness Control Screen] 4.1.1 LCD Brightness Control Follow the succeeding instructions to adjust the LCD brightness of the CarDoctor. The direction keys W and X let the user adjust the LCD brightness. Press W to decrease the screen’s brightness. Press X to increase the screen’s brightness.
Select the clock icon on the SYSTEM MENU. Picture 4.2 [Clock Setting Screen] The time should be set the first time the Car-Doctor is used. Setting the time is done as follows; ; Left/Right (W and X) Key: Allows the selection of year, month, day, hour, minute, and second. ; Up/Down (S and T) Key: Can modify the value ① Pressing the Enter key ( ) first, the Hour item will blink. ② Use S and T to set the value of the blinking item. ③ Transfer to the next item using W and X to set the value of the next item.
4.3 Buzzer Setting Select the Buzzer icon on the SYSTEM MENU. Picture 4.3 [Buzzer Setting Screen] Car-Doctor can set the sounds when you press keys. This is the way to set the buzzer. ; Left/Right (W, X) Key: Sets the volume of the buzzer. (The bigger or smaller the number is, the stronger or weaker the sound is.) ; Up/Down (S, T) Key: Sets the pitch of the buzzer. (The bigger or smaller the number is, the higher or lower the pitch is set.) ; Enter Key ( ): Saves the settings.
4.4 LCD TEST Select the LCD Test icon on the SYSTEM MENU Picture 4.4 [LCD TEST Screen] The Car-Doctor can check whether the LCD has Dot Defect through the LCD Test. As seen in picture 4.4, the screen is reversed every second, during which the user must check for any pixel defect. To return to the previous item, select ESC key. Note: Car-Doctor LCD consists of 320 ± 240 pixels.
4.5 Memory Information Select Memory icon on the SYSTEM MENU Picture 4.5 [Memory Information Screen] The Car-Doctor shows the internal memory capacity of the equipment, the memory capacity, and the used capacity of the program card. ; Picture 4.5 shows the information on memory capacity and used capacity of the equipment in the upper menu. ; The lower menu shows the information on the program card.
4.6 KEY TEST Select KEY PAD icon on the SYSTEM MENU. Picture 4.6 [KEY PAD Screen] To check whether there’s any problem in keys, press any key. Then the key you pressed will be reserved to check the problem. ; To return to the previous item, select the ESC key. ; To return to the System Menu after checking KEY PAD, press the ESC key twice.
4.7 Battery Voltage Information Select Battery icon on the SYSTEM MENU. Picture 4.7 [Battery Voltage Info Screen] ; The upper graph indicates the current battery voltage. In case the battery voltage is low, please recharge. ; The lower graph indicates the DC input voltage (external power). ; To return to the previous item, select the ESC key.
4.8 RF-TEST Select RF-TEST icon on the SYSTEM MENU to access the TEST screen. The following shows the way to connect. 4.8.1 How to Connect ① Self-Test Adaptor ② AC/DC Power Adaptor DC Jack [Picture 4.16 Self-Test Adaptor Connection] ① Connect the main cable and the Self-Test adaptor to the wireless module. ② Connect the AC/DC power adaptor DC Jack to supply power.
4.8.2 RF TEST Screen Picture 4.8 [TEST Screen] RF Test checks the status of communication between the main body and the wireless module, whether the wireless module has any defect or not. (Checking the communication circuit of the wireless module) ① Press Enter key ( ) to start the TEST. ② If any defect is detected, the relevant error message will be displayed. ③ To return to the previous item, select the ESC key.
4.9 UPDATE Select the Update icon on the SYSTEM MENU. Update is used when Car-Doctor adds a new car or upgrades applications. It is also used in updating the firmware of the wireless module. For further details, see the provided manual. 4.10 Tool Information Select the System Info icon on the SYSTEM MENU. It is same with section 2.7 on Tool Info.
III. APPENDIX 1. Types of Car Adaptors (Diagnostic Connector)………………… 2. PC Program (Dr.
1. Types of Car Adaptors (Diagnostic Connectors) SHAPE FUNCTION PART NO. OBD-II 16 Pin Adaptor Enables diagnosis of vehicles by connecting to the diagnostic connector of OBD-II vehicle. CB-96-0063 Enables diagnosis of vehicles by connecting to the 16 pin diagnostic connector of the general vehicles. CB-96-0061 Enables diagnosis of vehicles by connecting to the 20 pin diagnostic connector of Musso and Korando vehicles produced after 1998.
Samsung Adaptor (14 Pin) Enables diagnosis of vehicles by connecting to the 14 pin diagnostic connector of general vehicle types. CB-97-0046 Enables diagnosis of vehicles by connecting to the 12 pin diagnostic connector of general vehicle types. CB-96-0065 Enables diagnosis of vehicles by connecting to the 16 pin diagnostic connector of general vehicle types. CB-96-0063S Enables diagnosis of vehicles by connecting to the square 17 pin diagnostic connector.
Honda 3P Enables diagnosis of vehicles by connecting to the 3 pin diagnostic connector of general vehicle types BMW 20P Benz 3P Enables diagnosis of vehicles by connecting to the 3 pin diagnostic connector of general vehicle types Enables diagnosis of vehicles by connecting to the 3 pin diagnostic connector of general vehicle types 068-M1002 068-M1003 068-M1005 Benz 38P Enables diagnosis of vehicles by connecting to the 38 pin diagnostic connector of general vehicle types 068-E0004 ※ Car adaptors m
Operating Manual 1st Edition published in February 2006 Author: JASTEC CO., LTD. Publisher: JASTEC CO., LTD. Editing/Printing: JASTEC CO., LTD. Registration No.: Registration Date: February 2006 92-7, Geumgok-dong, Bundang, Seongnam-si, Gyeonggi-do, South Korea TEL: +82 31 719 5170, 2747 (DIRECT) FAX: +82 31 719 5177 All rights reserved. No part of this book may be reproduced or transmitted in any form without written permission from the publisher.
