User's Manual

ManualsBrandsJastec ManualsElectronicsuvim-W

uvim-W User Manual

Summary of content (18 pages)

PAGE 1
uvim-W User Manual
PAGE 2
uvim-W • Product Name : uvim-W • Part Number : JAS-U2-2018 • Serial Number : UW1AC00001(example) – Position 1~2 : Product Name • UW, uvim-W – Position 3 : Wireless option • WiFi + Bluetooth : 1 • WiFi : 2 • Bluetooth : 3 – Position 4 : Year • 2018 : A, 2019 : B – Position 5 : Month(hex, 1 ~ C) • Jan : 1, Feb : 2, Sep : 9, Oct : A, Nov : B, Dec : C – Position 6~10 : Serial Number 1 본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
PAGE 4
uVIM Special Feature • uvim-W(Universal Vehicle Interface Module - Wireless) • Power input by USB, DLC or DC. • Communicate by USB port and wireless(WIFI, BT) of PC • CAN Communication Function – CAN 2.0B – J1939 data acquisition is possible. • K-LINE communication is possible. – ISO-14230, ISO9141-2 • RS-232 communication is possible. • Data recording function is possible. 3 본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
PAGE 5
Components – uvim-W Specification 4 No Item 1 CASE  Color : BLACK  Material : PLASTIC & RUBBER  Size(mm) : 125(L) X 85(W) X 27(H) 2 CPU  STM32F405VG 3 Indication 4 Power 5 Internal Battery 5 Internal Memory 6 PC Interface 7 Vehicle Interface 9 Environment 10 Cable Connector 본 문서는 기밀문서로 무단배포 및 유포를 금지합니다. Specification  5x LED  POWER/DLC/USB/WIRELESS/RECORD  Vehicle Power(12V ~ 24V)  DC Input(6 ~ 35)  Reset Switch  552030, 280mA/3.8V  8MB Flash  USB2.
PAGE 6
Components - Cable 16 PIN Main Cable 3M Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20  Length : 100cm  Material : PVC 3M Connecctor 5 OBD2 Connecctor 본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
PAGE 10
uvim-W Explanation 1. Function Switch D(Diagnostic Mode) - PC interface can be used.(The diagnostic software of PC can communicate with uvim-W). - The uvim-W can communicate with vehicle and PC software. R(Recording Mode) - PC interface cannot be used. - The uvim-W can communicate with vehicle and save data to micro SD card. 9 본 문서는 기밀문서로 무단배포 및 유포를 금지합니다.
PAGE 11
uvim-W Explanation 1. LED Status POWER : Indicates power status DLC : Indicates vehicle interface status USB : Indicates usb interface status WIRELESS : Indicates wireless interface status RECORD : Indicates RECORD mode status. 1. - Power ON Status USB is connected. DLC is connected and power is input by DLC. Power is input by DC. 2. Vehicle interface Status - When uvim-W communicates with vehicle, DLC led is on. 3. PC interface Status - When uvim-W communicates with USB, USB led is on.
PAGE 12
uvim-W USB Driver Recognition Windows 7/8/8.1/10 1. Install “Setup_Jastec_uVIM_Driver_V1.1.exe” and connect uVIM USB Cable with PC. 2. Device Setup is automatically started as below. 3. After Device Setup is completed, check the status of JASTEC Virtual COM Port from Device Manager. If it shows like picture 1 from Device Manager, you need to re-start driver updates. If it shows like picture 2 from Device Manager, it means that driver has installed.
PAGE 13
uvim-W USB Driver Recognition 4. In case of JASTEC Virtual COM Port is shown as yellow exclamation mark from Other devices, you need to re-start driver update. 5. When you select Update Driver Software, Driver Searching screen will be shown. At this time, click ‘Search automatically for updated driver software 6. Check the status of installation of Driver If it shows like picture 1, it means that driver has installed.
PAGE 14
uvim-W USB Driver Recognition 7. This time, click ‘Browse my computer for driver software.’ 8. Click the folder that Diagnosis Program is installed from ‘Browse for driver software on your computer’. Diagnosis program installed location is as below. In case of 32bit OS : c:\program files\xxx In case of 64bit OS : c:\program files(x86)\xxx 9. When you click ‘Next’ button from above screen, ‘Windows Security’ will be shown as below. At this time, click 'Install this driver software anyway.’ 10.
PAGE 17
Instruction for uvim-W use 1. Connect uvim-W to PC Connect Wireless(WiFi or BT) or USB. If you connect by USB, process below step. • • • • 2. uvim-W Setting • 3. Install a driver (Refer to pg 10) to find a uvim-W driver on PC uvim-W will be identified as Jastec Virtual Comport (refer to pg 13). uvim-W will be set to connect to vehicle ECU through serial interface in CAN, K-line Protocol Vehicle Communication • uvim-W setting & ECU Communication shall be operated as follows.
PAGE 18
ETC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.