Audio/Video SRP2024R/27 User manual Scan this code to watch a video on how to set up this remote www.byjasco.
Table of Contents Install your Roku remote.............................................2 Setup...............................................................................3 Button Functions..........................................................4 Programming Your Remote.........................................6 Direct Code Entry....................................................6 Auto Code Search...................................................8 Controlling Combo Devices..............................
Setup Your universal remote requires two (2) AAA batteries (not included). Alkaline batteries are recommended. Battery Installation 1. On the back of the remote, remove the two retaining screws at the bottom. Pull down on the textured surface and slide battery cover downward to remove. 2. Match the (+) and (-) marks on the batteries to the (+) and (-) marks inside the battery compartment, then insert two (2) AAA batteries. Be sure to use fresh batteries. 3.
Button Functions 4 5 6 MENU INPUT 1 8 TV STR OK 7 9 DVD AUD 11 10 EXIT 3 13 12 A 16 CH 17 2 B C D 1 2 3 4 5 6 14 15 18 SLEEP 7 8 9 19 SETUP (-) 0 ENTER 20 4 21
Button Functions 1. Power - Turns devices ON/OFF (on side) 2. Volume up/down (on side) 3. Mute - Mutes sound (on side) 4. Home/Guide - Access features on streaming devices or Guide on cable/satellite receivers 5. Input - Selects video inputs 6. Menu - Displays the on-screen menu 7. TV, STR, DVD, AUD - Selects the device to control 8. Ok - Selects menu items for the controlled device 9. Up/down/left/right menu navigation 10. Exit - Exit on-screen menus 11.
Programming Your Remote MENU INPUT Your remote is designed to control multiple audio/ TV video devices. To use, you will need to program the remote for your devices. There are two different STR methods you can use to program the remote, Direct Code EntryOK or Auto Code Search. DVD The Direct Code Entry method is the recommended method as it is the simplest AUD and quickest method in most cases. • The Auto Code Search method searches through EXIT all the codes in the remote to find a code for your device.
DVD AUD EXIT Programming Your Remote A C D 1 2 3 4 5 6 SLEEP 7 8 9 SETUP (-) 0 ENTER CH MENU B 4. Use the number buttons on the remote to enter the first 4-digit remote code you circled in the Code List in Step 1. The red light will turn off after entering the fourth digit. 5. Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect.
STR OK DVD Programming Your Remote AUD EXIT Auto Code Search The Auto Code Search is a process where you can search through all the codes stored in the remote to find a code for your device. It is recommended that you read through all the steps below to familiarize yourself with the Auto Code Search before starting the process. A B C D 1. Manually turn on the device you wish to control. CH 1 Note:2The Auto 3 Code Search process cannot be used for devices without 4 power 5 ON/OFF 6 capability.
Programming Your Remote The remote will re-send the first code of the 10 codes from Step 4. The red light will blink once and remain on. Did the device turn off? MENU MENU • If YES, you have found a code for the device. Press and release the same device button you pressed in Step 3. This will store the code in the remote. Go to Step 7. • If NO, continue to press and release the VOL+ button until the device turns off to test the other 9 codes from Step 4.
EXIT Using Your Remote MENU INPUT Primary Audio B Control C D A MENU The primary audio control feature allows you to TV a single device that the volume buttons select CH 1 For2example, 3 the remote can be always control. inSTR TV mode while the volume buttons control the 5 receiver 6 OK volume on 4 your audio or sound bar instead MENU INPUT of your TV. DVD SLEEP AUD TV SETUP STR DVD AUD MENU 7 8 (-) 0 9 Enabling the Primary Audio Control Feature ENTER 1.
A 1 CH OK B C 2 D 3 MENU Using Your Remote INPUT 4 5 6 TV B INPUT 8 9 7 Code Identification SLEEP C STRD 1. Press and hold down the SETUP ENTER (-) button 0 on SETUP OK the remote until the red 2 TV STR 5 DVD MENU DVD 3 INPUT AUDOK 6 AUD 8 B 0C MENU 9 EXIT OK STR DVD B CH EXIT 5 SLEEP SETUP MENU 8 0 3. Press and release the ENTER OK button. D ENTER C A 2 2. Press and release the desired device button (TV, STR, DVD, AUD) you would like the code for.
Troubleshooting Remote does not operate your device. • Make sure the batteries are fresh and installed correctly. • Aim the remote directly at your device and make sure that there are no obstructions between the remote and the device. • Make sure you select the appropriate device on the remote you wish to control; TV for TV and DVD for DVD player. • Try programming the remote with a different code. See Direct Code Entry section. • Remote may not be compatible with your device.
Limited-Lifetime Warranty Jasco Products Company warrants this product to be free from manufacturing defects. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied.
FCC Statement Suppliers Declaration of Conformity Model #: SRP2024R/27 Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Audio/Video SRP2024R/27 Manual de usuario Escanee este código para ver un video acerca de cómo configurar este control remoto www.byjasco.
Índice Instala tu Control Remoto de Roku......................... 18 Configuración............................................................... 19 Funciones de los Botones........................................ 20 Programación de su Control Remoto......................22. Entrada Directa de Códigos................................22. Búsqueda Automática de Códigos.....................24 Control de Aparatos Combinados......................25 Uso de su Control Remoto ........................................
Configuración El control remoto universal usa dos (2) baterías AAA (no incluidas). Se recomienda usar baterías alcalinas. Instalación de las baterías 1. En la parte posterior del control remoto, retire los dos tornillos de retención en la parte inferior. Presione hacia abajo sobre la superficie texturada y deslice la tapa de las baterías para quitarla. 2.
Funciones de los Botones 4 5 6 MENU INPUT 1 8 TV STR OK 7 9 DVD AUD 11 10 EXIT 3 13 12 A 16 CH 17 2 B C D 1 2 3 4 5 6 18 SLEEP 7 8 9 19 SETUP (-) 0 ENTER 20 20 14 15 21
Funciones de los Botones 1. Encendido/Apagado - Enciende o apaga los aparatos 2. Subir/Bajar volumen 3. Mute - Apaga el sonido 4. Inicio y Guía - Acceder fácilmente a funciones sobre dispositivos de transmisión de contenido web, o Guía a receptores de cable/satélite 5. Input - Selecciona las entradas de video 6. Menu - Muestra el menú en pantalla 7. TV, STR, DVD, AUD - Selecciona el aparato que desea controlar 8. Ok - Selecciona los elementos del menú para el dispositivo que está controlando 9.
Programación de su Control Remoto Este control remoto universal marca GE está MENU diseñado para controlar múltiples aparatos de INPUT audio/video mediante el uso de un único control remoto. Para usar este control remoto, deberá TV programarlo para controlar los aparatos. Hay dos formas de programar el control remoto: STR Entrada directa de códigos o Búsqueda automática de códigos.
DVD AUD EXIT Programación de su Control Remoto A C D 1 2 3 4 5 6 SLEEP 7 8 9 SETUP (-) 0 ENTER CH ENU B 4. Use los botones de números del control remoto para introducir el primer código remoto de 4 dígitos que encerró en un círculo en la Lista de códigos en el Paso 1. La luz roja se apagará después de introducir el cuarto dígito. 5. Apunte el control remoto hacia el dispositivo. Pruebe los botones en el control para ver si el dispositivo responde como debería ser.
OK DVD AUD Programación de su Control Remoto EXIT Búsqueda automática de códigos La Búsqueda automática de códigos es un proceso mediante el cual puede buscar por todos los códigos almacenados en el control remoto para encontrar un código para el dispositivo. Se recomienda que lea todos los pasos a continuación para familiarizarse con la Búsqueda C D de códigos antes de A Bautomática comenzar el proceso. CH 1. Encienda manualmente el dispositivo que 1 2 3 desea controlar.
Programación de su Control Remoto La luz roja parpadeará una vez y permanecerá encendida. ¿Se apagó el dispositivo? MENU MENU • Si la respuesta es AFIRMATIVA, significa que ha encontrado un código para el dispositivo. Presione y suelte el mismo botón que oprimió en el Paso 3. Esta acción almacenará el código en el control remoto. Proceda al Paso 7. • Si la respuesta es NEGATIVA, siga oprimiendo y soltando el botón VOL+ hasta que se apague el dispositivo para probar los otros 9 códigos del Paso 4.
AUD EXIT Uso de su Control Remoto Característica de volumen maestro La característica de volumen maestro le permite MENU seleccionar un solo dispositivo que siempre es INPUT B C A controlado por los botonesDde volumen. Por ej., el control remoto puede estar en el modo de televisor TV mientras que los botones de volumen controlan el CH 2 de audio 3 o la barra de sonido volumen del1receptor STR en lugar del televisor.
A B C D 1 2 3 4 5 MENU CH Uso de su Control Remoto OK INPUT 6 Identificación de códigos 8 9 7 SLEEP B C STR TV 3 DVDOK DVD 5 6 AUD CH 5 SLEEP 8 EXIT SETUP MENU 0 MENU 9 D EXIT C STR OK 3. Presione y suelte el botón ENTRAR. ENTER DVD B OK C 1 32 D 3 4 5 6 (-) 0 ENTER A AUD 68 7 9 9 4. Presione y suelte el botón n.º 1. Cuente la cantidad de veces que la luz del control remoto parpadea. Este el número correspondiente al primer EXIT dígito del código.
Solución de Problemas El control remoto no funciona con su aparato. • Asegúrese de que las pilas sean nuevas y estén bien colocadas. • Apunte a su dispositivo directamente con el control remoto. • Asegúrese de seleccionar en el control remoto el dispositivo correcto que desea controlar, por ejemplo: TV para el televisor y DVD para el DVD. • Intente programar el control remoto usando un código distinto. Consulte la sección Entrada directa de códigos.
Garantía Limitada de por Vida Jasco Products Company garantiza que este producto está libre de defectos de fabricación. Esta garantía se limita a la reparación o sustitución de este producto solamente y no se extiende a daños incidentales o derivados a otros productos que se usen con esta unidad. Esta garantía remplaza a todas las demás garantías expresas o implícitas.
Declaración de la FCC DECLARACIÓN DE LA COMISIÓN FEDERAL DE COMUNICACIONES Declaración de conformidad del proveedor Modelo #: SRP2024R/27 Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com Este dispositivo cumple con las Especificaciones del apartado 15 de las normas de la FCC y con las especificaciones de las normas radioeléctricas (RSS) del Ministerio de Industria de Canadá aplicables a aparatos exentos de licencia.