User's Manual

ManualsBrandsJasco Products ManualsElectronicsThe In/Out Thermo-Hygrometer Alarm

MULMUL

MUL

TI-CHANNEL IN-OUTTI-CHANNEL IN-OUT

TI-CHANNEL IN-OUT

THERMO-HYGRTHERMO-HYGR

THERMO-HYGR

OMETEROMETER

OMETER

WITH CABLE FREE SENSOR WITH CABLE FREE SENSOR

WITH CABLE FREE SENSOR

ANDAND

AND

CLOCKCLOCK

CLOCK

MODEL: GE5805WS6MODEL: GE5805WS6

MODEL: GE5805WS6

USER'S MANUAL

INTRINTR

INTR

ODUCTIONODUCTION

ODUCTION

Congratulations on your purchase of the GE5805WS6 Multi-Chan-

nel In-Out Thermo-Hygrometer with 433MHz cable free sensor

and calendar clock.

The basic package comes with a main unit, which is the

temperature, humidity and calendar clock station, and a remote

unit, the thermo-hygro sensor.

The main unit has large read-outs for In-Out temperature and

humidity which are collected and transmitted by the remote unit.

The main unit can support up to three remote units.

As for the calendar clock, it includes five-language display and

2-minutes crescendo single alarm. It is also equipped with a moon

phase scanner, which lets you check the moon phase of any day

between 2000 to 2099.

MAIN FEAMAIN FEA

MAIN FEA

TURESTURES

TURES

RAR286HG-e.p65 2003/11/5, AM 10:501

Summary of content (10 pages)

PAGE 1
GB MAIN FEA TURES FEATURES MUL TI-CHANNEL IN-OUT MULTI-CHANNEL THERMO-HYGR OMETER THERMO-HYGROMETER WITH CABLE FREE SENSOR AND CLOCK MODEL: GE5805WS6 USER'S MANUAL INTR ODUCTION INTRODUCTION Congratulations on your purchase of the GE5805WS6 Multi-Channel In-Out Thermo-Hygrometer with 433MHz cable free sensor and calendar clock. The basic package comes with a main unit, which is the temperature, humidity and calendar clock station, and a remote unit, the thermo-hygro sensor.
PAGE 2
GB K. RESET B UTT ON BUTT UTTON Returns all settings to default values A. THREE-LINE DISPLA Y DISPLAY Facilitates easy reading of remote and indoors temperatures and humidities and calendar clock with moon phase L. WALL-MOUNT RECESSED HOLE For mounting the main unit on a wall B. MODE B UTT BUTT UTTON ON Toggles the display modes and set the time for calendar clock M. BATTER Y COMP AR TMENTS TTERY COMPAR ARTMENTS Accommodates two UM-3 or “AA” size 1.5V batteries C.
PAGE 3
GB A. TW O-LINE DISPLA Y TWO-LINE DISPLAY Facilitates easy reading of outdoor temperature and humidity. 4. Position the remote unit and main unit within effective transmission range, which, in usual circumstances, is 20 to 30 meters. B. LED INDICA TOR INDICAT Flashes when the remote unit transmits a reading Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned. Try various set-ups for best result. C.
PAGE 4
GB BATTER Y INST ALLA TION: MAIN UNIT TTERY INSTALLA ALLATION: HO W TO USE THE TABLE ST AND HOW STAND OR WALL MOUNTING 1. Open the battery compartment door. Flip open the table stand for standing the main unit on a flat surface or you can mount the unit on a wall using the recessed screw hole. 2. Install 2 alkaline batteries (UM-3 or “AA” size 1.5V) strictly according to the polarities shown. As for the remote unit, you can mount the unit on a wall using the recessed screw hole.
PAGE 5
GB THE RESET B UTT ON BUTT UTTON HO W TO CHECK REMO TE REMO TE AND HOW REMOTE REMOTE INDOOR READINGS This button is only used when the unit is operating in an unfavourable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. The indoor temperature and humidity are shown on the bottom line of the display. As for the remote sites or channels, press CH to go from one channel to another.
PAGE 6
GB HO W TO READ THE KINETIC WAVE HOW DISPLA Y DISPLAY DISCONNECTED SIGN ALS SIGNALS If without obvious reasons the display for a particular channel goes blank, press CH and MEM to enforce an immediate search. If that fails, check: The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms: 1. The remote unit of that channel is still in place. The unit is in searching mode. 2. The batteries of both the remote unit and main unit. Replace as necessary.
PAGE 7
GB For display language, you can choose among English (E), German (D), French (F), Italian (I) and Spanish (S) - in that order. Day-of-week is the usual sequence of Monday through Sunday. CALEND AR CLOCK DISPLA Y MODES CALENDAR DISPLAY Each press on the MODE button will toggle the display as below. MODE 1. Hour-Minute-Second | If there is an item you do not wish to change, simply press MODE to bypass the item. Month-Day When you are done, press MODE to exit.
PAGE 8
GB To check the moon phase for a particular day, press the UP or WN button once. The clock will enter moon phase scanning DOWN DO mode. ALARM AND SNOOZE FUNCTION When the alarm is set, it will activate at the set time with the alarm-on icon flashing. Without interruption, the alarm will activate for 2 minutes. WN button to locate the date you want to check. Use the UP or DO DOWN The calendar will be day-driven in this mode. You can go back in time or travel to the future, any day between 2000 to 2099.
PAGE 9
Moon Phase scanner Range Temper ement emperaa tur turee Measur Measurement Main unit : use 2 pcs UM-3 or “AA” 1.5V battery Remote sensing unit : use 2 pcs UM-3 or “AA” 1.5V battery Indoor Temperature measurement Proposed operating range : -5.0°C to +50.0°C Temperature resolution : 0.1°C 23.0°F to 122.0°F Weight 0.2°F Remote unit : -20.0°C to +60.0°C RF Transmission Frequency : 433 MHz No.
PAGE 10
GB FCC : CA UTION CAUTION - The content of this manual is subject to change without further notice. NO TE: This equipment has been tested and found to comply with NOTE: the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.