User's Manual

ManualsBrandsJasco Products ManualsElectronicsBluetooth Home Stereo Transmitter and Receiver

99004 Instructions, Revision a.1 10/18/2006 11:31:38 AM

99004

Bluetooth Home Stereo Transmitter & Receiver

Class 1

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could

void the user’s authority to operate the equipment.

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause undesired operation of the device.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must

follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located

or operating in conjunction with any other antenna or transmitter.

Using the Product

Thank you or choosing the GE 99004 Stereo Receiver & Transmitter. This device provides users with the ability to

receive or transmit stereo audio via Bluetooth wireless technology.

• Receive Mode: The audio source can be any device that is Bluetooth enabled to comply with the A2DP

(Advanced Audio Distribution Profile) specification. Examples would include a computer with a music library or

an MP3 player with Bluetooth transmission technology. A typical application would be to stream music from one

of the sources listed above to your home entertainment system, allowing the music to be heard through your

stereo system’s speakers.

Summary of content (5 pages)

PAGE 1
99004 Instructions, Revision a.1 10/18/2006 11:31:38 AM 99004 Bluetooth Home Stereo Transmitter & Receiver Class 1 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
PAGE 2
99004 Instructions, Revision a.1 • 10/18/2006 11:31:38 AM Transmit Mode: The source can be any audio device that has line output jacks like your stereo receiver. A typical application would be to stream the music from your stereo system to a pair of Bluetooth enabled stereo headphones. Connections Your GE 99004 came with an AC Adapter and two RCA-to-3.5mm stereo patch cables. 1. Plug the AC adapter in to the receiver and the other end to a standard AC outlet. 2.
PAGE 3
99004 Instructions, Revision a.1 10/18/2006 11:31:38 AM b. Verify that the 99004 is within the specified range of (30 feet / 10 meters for Class 2 devices or 300 feet / 100 meters for Class 1 devices) from the audio source and that the audio source is transmitting via Bluetooth. c. Check to see if any other Bluetooth device is connected to the 99004. If other devices are connected, the indicator LED on the RX box will always on. d. Turn off the 99004 and all transmitting devices.
PAGE 4
99004 Instructions, Revision a.1 10/18/2006 11:31:38 AM Jasco Products Company 10 E. Memorial Road Oklahoma City, OK 73114 The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Thomson Inc. is under license. Other trademarks and trade names are those of their respective owners.
PAGE 5
99004 Instructions, Revision a.1 10/18/2006 11:31:38 AM Notices FCC-B Radio Frequency Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.