Project Name: Healthometer nuyu Activity Monitor Product No.: HNY100 Confidential document, all rights reserved by R.E.A.C. Co.
PRODUCT SPECIFICATION Battery : Lithium cell CR2032 (220mAh) Bluetooth distance : max. 8m Display : OLED dot matrix (resolution : 64 x 32) MAIN FEATURES Daily step taken, distance traveled; Daily Calories burnt (including RMR); Goal achieved Progress; Real Time Clock; Low Battery Indicator Bluetooth 4.0 Sleep Quality (Auto sleep and manual function done APP) Exercise mode.
DAILY DATA RANGE (ACTIVITY) Daily step : 0 - 999999 steps Step Distance : 0 – 599.99km Active Time Duration : 00:00 – 23:59 (hr:mm) Calories : 0 – 59999 kcal Age : 5 - 99 Weight : 30 – 200kg Height : 100 cm – 250cm Step length : 30 cm – 200cm Note: The step accuracy is varied which is dependent on different testing conditions. (eg, wearing positions, pace, movement pattern of a person…..).
POWER ON RESET (INITIALIZATION) When new battery is inserted, there is a nuyu logo which shows on the display for 3s, Then enter to the step mode, the default step time is 0 step. Swipe from right to left to scroll the next display. Default scroll sequence : Steps Clock Distance Calories Goal achieve Step Note : When there is no any swipe within 5s, it will exit and OLED will be off.
The real time clock was synchronized by Apps 12/24 hour mode format was also selected by Apps Low Battery icon will only be displayed when battery is low. Low Battery indication DISTANCE MODE When scroll to the DISTANCE mode, it will show current daily distance traveled below The display unit can be selected Imperial or Metric unit by Apps Measuring Range : 0 – 600.00km (0 – 372.80 miles) The measured result in miles or km will be with 2 decimal places.
Default Goal steps: 7000 steps. The goal steps can be configured by Apps. Display range : 0 – 100+ (%) Maximum range : 999% CONFIGURABLE DISPLAY In Home Mode, the display of “DISTANCE”, “TOTAL CALORIES” and “GOAL ACHIEVED” is configurable ON/OFF by APPs. If the modes of display are configured to be OFF, it will not show this mode on the device. SYNCHRONIZATION a.
BATTERY LEVEL INDICATION There is 1 levels of battery indication. If the battery is low, it will show on the real time clock screen. If the battery is almost empty, there is an empty battery icon shown when swipe to turned on OLED The swipe function is disabled, but the other functions (Bluetooth, step count..) are still working. The customer needs to synchronize the data before replacing new battery in order to prevent the data lost.
During Exercise tracking, swipe to scroll the displays in the Exercise tracking shown below Entering to the Exercise mode, there are some manuals inside: Exercise timer, Exercise step, Exercise distance, Exercise calories burnt during this session, pause and finish The Exercise session will be auto exit and saved after 24 hours. PAUSE EXERCISE TRACKING During Exercise mode, scroll the “PAUSE” display, double tap to confirm the pause the Exercise tracking.
the display. 2.) Double tap in “RESUME?” display, it will go to count up timer display. FINISH EXERCISE TRACKING During Exercise mode, scroll the “FINISH?” display, double tap to save and exit the Exercise tracking, and return to Home Page (Step mode). Once the Exercise session was saved and exit, it will create exercise session record. MANUAL SLEEP MODE When Auto sleep is set to be OFF by APPs, manual sleep mode is enabled and will be configured on the display.
”WAKE UP?”, During “WAKE UP?” display modes, double tap to confirm to stop the sleep tracking and return to home mode (Step mode). Confidential document, all rights reserved by R.E.A.C. Co.
EQUATION 1.) Mufflin Equation for Resting Metabolic Rate (RMR) The Mufflin Equation for RMR (in kcal/day): Note: Weight is in kg, height is in cm, age is in year. 2.) Activity calories Equation using METs Table METs is calculated by getting the average speed over 10 seconds and looking up in the METs table for the relevant METs value. (Refer to below table for METs reference) 2011 METs Category Description 1.0 Inactivity Sleeping 1.3 Inactivity General 2.
Confidential document, all rights reserved by R.E.A.C. Co.
REAC WRIST BAND PROTOCOL GATT Service Profile : Summary : REAC Wrist Band service exposes step, exercise time, calorie burned, distance walked or run, sleep activities, time from REAC. Wrist Band series device for fitness applications. Bluetooth Protocol Bluetooth 4.0 LE Protocol - GAP, GATT GATT Service Characteristic : GATT Service Characteristic : REQUEST COMMAND FORMAT FROM SMARTPHONE TO DEVICE Rev 0.9a 1.) Modify the scrolling display of manual sleep during manual sleep.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.