User's Manual

Page 1 of 2

Installation Manual (Example)

1. Information on the final product

The final product installed this module shall be labeled permanently with the following

information. When the final product is so small for such use that it is not practicable to place

the statement in section 1.2 on it, the statement shall be placed in a prominent location in the

instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the

container in which the device is marketed.

1.1 FCC ID code and ISED number

“Contains FCC ID: FCC ID: AXG-RF2TPA, IC:1373A-RF2TPA, HVIN: rf2tpa_24R273A”

1.2 FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

PAGE 1
Installation Manual (Example) 1. Information on the final product The final product installed this module shall be labeled permanently with the following information. When the final product is so small for such use that it is not practicable to place the statement in section 1.2 on it, the statement shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. 1.
PAGE 2
. Information on the User’s Manual of the final product The following information shall be included in the User’s Manual of the final product. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.