Use Instruction

Seven color lamp 2 generation 1 drag 4 use instruction.
1. RGB seven color lamp connection method.
Head lamp
Voltage stabilizing module (decoder)
(large lamp power supply plug first string
stabilizer module then connect the car socket)
(1)
Voltage stabilizing module (decoder)
(large lamp power supply plug first string
stabilizer module then connect the car socket)
(IOS8.0 / Android5.3)
The above
White line: turn the lamp extension cord.
Yellow line: turn the lamp extension cord.
Green line: turn signal no.2.
Blue line: 1 turn signal.
Black line: negative pole.
Red line: connect +12V.
(1)
Head lamp
Adapter cable
(2)
(2)
RG B LED ROCK LIGHT
Bluetooth Controller
Daytime Running
Light
Fog lamps
(fog lamp power cord plugs first connect the switch
line and then connect the car fog lamp socket)
(fog lamp power cord plugs first connect the switch
line and then connect the car fog lamp socket)
7 colour module
Fog lamps
Adapter cable
(turn the lamp extension cord)
2. Instructions for download and installation of RGB Software APP:
1. Lights are all connected to the power, use the mobile phone (IOS or Android) to scan the QR code on the module box or
the brochure to download RGB APP phone software, open APP( ) after installation will prompt whether to enable Bluetooth
(Figure 1), open blueClick on the ( ) icon in the upper left corner and click on the "My Device" right arrow to pop up (Figure 2)
to indicate that the connection has been made.
2. If the icon appears on the My Device bar (Figure 3), exit the software and turn off Bluetooth or disconnect RGB
power and try again.
3. Press the setting icon in the upper right corner to find the operation instructions. Enter (Figure 4) Finally, use the APP
operation instructions to use it.
( Figure 1) ( Figure 2 ) ( Figure 3 ) ( Figure 4 )