J M-WA L 45 USER G U I D E JM-WAL45-R1, KEN5-R1 Wi AudioStream Professional Stereo Digital Wireless Audio Dongles DIGITAL WIRELES S T E R E O
Wi-AudioStream CONGRATULATIONS CONGRATULATIONS! Thank You For Choosing Jangus Music! Congratulations on your purchase of the Wi-AudioStream Professional Stereo Digital Wireless Audio Dongles. In this manual, you’ll find information designed to help you understand the capability of your Wi-AudioStream as well as step-by-step explanation on how to install and operate your Wi-AudioStream professional stereo digital wireless audio dongles.
Wi-AudioStream TECHNICAL SUPPORT We want you to get the most from your new Wi-AudioStream professional stereo digital wireless audio dongles! Simply logon to www.jangusmusic.com and access the powerful resources available online including instructional manuals and frequently asked questions. Our customer service support staff are ready to assist you with any question you may have. Your Wi-AudioStream comes with 90 days of telephone support and one year of service coverage.
Wi-AudioStream INTRODUCTION Making Great Musical Gear Better! Jangus Music’s Wi-AudioStream JM-WAL45 professional stereo digital wireless audio dongles solution is the smallest, most advanced cable replacement technology available today that fits on the palm of your hand! This full function 2.
Wi-AudioStream INTRODUCTION Meeting The Specs! MP3 Mono MIC Amplifiers The Wi-AudioStream transmitter small and rugged design, boasts three (3) different Stereo MIC power up modes to support the following Smart Phone instruments connections: • Line-in (Stereo) • Stereo Microphones • Mono Microphones Each of the power up modes are configured to apply the appropriate input impedance and input voltage levels to best match the electrical characteristics of the instrument connected to the transmitter dongle
Wi-AudioStream INTRODUCTION Extreme Flexibility! The Wi-AudioStream boasts an interchangeable 1/4” (6.35mm) TRS stereo connector jack, 1/8” (3.5mm) stereo miniature jack, 2.5mm subminiature jack and XLR connectors for maximum connectivity with audio devices. The Wi-AudioStream power source flexible design boasts an internal rechargeable battery for 6.
Wi-AudioStream INTRODUCTION Rx 3 Creating Your Audio Matrix! Jangus Music’s built-in digital wireless audio signal patch routing feature allows users to re-rout the audio output signal from their instruments to up to 8 different Rx digital wireless receivers including Jangus Music’s JM-WHM01 digital wireless headphone audio monitoring system for private listening and performance monitoring with a simple press of the Link button located on the transmitter dongle.
Wi-AudioStream PACKING LIST What is included in the package? w w w. j a n g u s m u s i c . c o m Verify that you have received all of the items listed below. Please visit our web site at www.jangusmsuic.com for additional accessories.
Wi-AudioStream ABOUT YOUR JM-WAL45 Wi Transmitter 1. Audio IN Jack 2. Power ON/OFF 3. Link / Paring 4. Power/Status LED 5. Volume UP 6. Volume Down 7. Mute 8. Sleep 9. MIC Mode 10. USB Charging Port 11. Belt Clip Wi Receiver j r o n q p l 1. Audio OUT Jack 2. Power ON/OFF 3. Link / Paring / VoIP m 11 4. Power/Status LED 5. Volume UP 6. Volume Down 7. Mute/ Play/Pause k 8. Previous Track s 9. Next Track 10. (VoIP) Microphone u | } y { z w ~ x 12 v 11 11. USB Charging Port 12.
Wi-AudioStream TRANSMITTER CONTROLS Transmitter Dongle Controls and Connections j Audio IN Jack: Provide stereo and mono connection for professional vocal and instruments capacitive microphones and any analog devices such as monitoring systems MP3 players, cell phones, stereo systems, computers and more...
Wi-AudioStream TRANSMITTER CONTROLS o Mute: Press and hold the Mute button for 3 seconds stop the audio transmission F Please refer to the “ “Function Matrix Table” section of this manual for more details p Link/Pair: The Link button performs two functions Paring and Linking. The Paring function allows the transmitter dongle to connect to up to 8 eight different receivers to create you own wireless audio matrix.
Wi-AudioStream TRANSMITTER CONTROLS Transmitter Dongle Controls and Connections q Sleep: The Sleep function button on the transmitter dongle is designed to prolong the battery life operations of the transmitter dongle by 50% as well as the receiver dongle battery life 35% when not in use.
Wi-AudioStream TRANSMITTER CONTROLS r MIC Power Mode: The MIC Mode multifunction button allows the user to choose between three different power up modes to support Stereo Capacitive Microphones, Mono Capacitive Microphones and Stereo Line -in to the transmitter dongle.
Wi-AudioStream RECEIVER CONTROLS Receiver Dongle Controls and Connections u Audio OUT Jack: Provide a stereo connection for professional In-ear Monitors, Sound Systems Mixer Samplers, Computers Home Digital Theaters, Headphones and more...
Wi-AudioStream RECEIVER CONTROLS z Link/VoIP: This multifunction button performs three functions, Paring, Linking and VoIP MIC activation. The VoIP function is covered in the VoIP Microphone on page 15. The Paring function allows the Receiver dongle to discovered by the Transmitter Dongle.
Wi-AudioStream RECEIVER CONTROLS Receiver Dongle Controls and Connections | Previous Track: The Previous Track function button is used with optional PC/MAC USB Transmitter dongle to remotely control the media player and sequencing software to jump to the next audio track on the play list Press the Previous Track button once to jump to the previous audio track.
Wi-AudioStream RECEIVER CONTROLS ~ VoIP Microphone: The Microphone on the Receiver dongle is used with optional PC/MAC USB Transmitter dongle for Voice over Internet Protocol (VoIP) communications. This powerful feature allow musicians to collaborate with each other over the internet F Please refer to the 11 Charging Port: To activate the VoIP Microphone on the Receiver dongle, press the LINK / VoIP button once.
Wi-AudioStream GETTING STARTED Ready, Charge, Go! AC Charger USB Connector Before using your new Wi-AudioStream professional digital wireless dongles, you need to fully charge the batteries on the dongles for approximately 2 hours. Charging 1. Plug the AC Charger into a power socket 2. Connect the USB Y-Split power cable into the USB port on the AC charger 3. Connect one of the two mini USB connectors into the Transmitter USB port 4. 5. 6. 7.
Wi-AudioStream PARING Paring the Wi-AudioStream Before using the Wi-AudioStream dongles with your instruments, you need to pair the transmitter dongle with the receiver dongle. Pairing will create connection between the transmitter dongle and receiver dongle. 1. First turn ON the transmitter (Tx) and the receiver (Rx) dongles by pressing and holding the POWER button , on each of the dongles for 2 seconds. kv p (Rx) 2. Press and hold the LINK button on the transmitter (Tx) dongle for 6 seconds.
Wi-AudioStream TRANSMITTER CONNECTION Audio Input Jack Connecting Capacitive Microphones to Transmitter! The Wi-AudioStream transmitter support Mono and Stereo capacitive microphones connection. 1. First Locate you Ear-worn Microphones or your Mono/Stereo capacitive microphones you wish to connect to the Wi-AudioStream transmitter. 2. Connect the 1/8” stereo male end of the MIC cable into the “Audio Input” jack on the transmitter dongle. Stereo Microphones Audio Cable 3.
Wi-AudioStream TRANSMITTER CONNECTION 5. Verify if you are connecting a Mono or Stereo microphone to the transmitter. 5.1 For Stereo Microphones Connection k for 2 seconds. r for 2 seconds until the Blue starts to flash a. Power up the transmitter by pressing and holing the POWER button b. Press and hold the MIC button with slow flashes r F The Power Status LED will show Slow Flashing Blue and Solid Green LEDs 5.2 For Stereo Microphones Connection k for 2 seconds.
Wi-AudioStream TRANSMITTER CONNECTION Connecting Musical Instruments & Gear to Transmitter! Audio Input Jack The Wi-AudioStream transmitter support professional digital instruments connections such as Mixers, JD gear, MP3 player, Stereo systems Computers Media players, Smart Phones, Flat Screen Displays and any device with headphone jack. 1. For (Mono) connection locate the 1/4” mono to 1/8” stereo cable For (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable 2.
Wi-AudioStream TRANSMITTER CONNECTION 4. For (Mono) connection, connect the 1/4” mono male end of the cable to the left mono output (L/MONO) located on the back panel of the digital instrument. Digital Instrument For (Stereo) connection, connect the two 1/4” male ends of the cable to the left (L/MONO) and right (R) outputs located on the back panel of the digital instrument.
Wi-AudioStream RECEIVER CONNECTION Connecting Analog and Digital Devices to Receiver! The Wi-AudioStream receiver support professional digital instruments connection such as Mixers, Amplifiers, Speaker, Samplers, Hard Disk Recorders, Computers, Headphones, In-Ear professional personal monitors, Stereo Systems and more... Please note connections must be made with the power turned off. Please be aware that careless operation may damage your speaker system or cause malfunctions.
Wi-AudioStream RECEIVER CONNECTION Audio Output Jack 2. Connect the 1/8” stereo end of the cable into the “Audio Input” jack on the transmitter dongle. 3. Rout the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable 4. Connect the 1/4” male end of the cable to the inputs of your amplifier, powered monitor or mixer.
Wi-AudioStream RECEIVER CONNECTION (Rx) 5. Turn ON the receiver (Rx) dongles by pressing and holding the POWER button on the receiver dongle for 2 seconds. v F The Power Status LED on the receiver (Rx) will show Solid Green LEDs F The flashing Green LED on the transmitter (Tx) will turn to Solid Green indicating communications between (Tx) and (Rx) is established. z v 6. Place the receiver (Rx) dongle on the amp as shown.
Wi-AudioStream RECEIVER CONNECTION Connecting Headphones and In-Ear Professional Personal Monitors! Audio Output Jack PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the 1/8” stereo connector end of your headphone or In-Ear personal monitor into the “Audio Output” jack on the receiver dongle. In-ear Personal Monitors 1.
Wi-AudioStream Tx FUNCTION MATRIX Transmitter (Tx) Button Function Matrix! Function Button Activation Hold Time LED Status 3 sec k POWER Press and Hold Pairing Mode Press and Hold 2 sec p LINK Signal Re-routing Click Click p LINK Volume UP/Down Click for Step, Press and hold for Auto Click mn Mute ON/OFF Press and Hold 2 sec o Sleep / Wake up Press and Hold 3 sec q Line in Mode (Stereo) Press and Hold MIC Button 2 sec r (Factory setting) Solid Green MIC Mode 1 (Stere
Wi-AudioStream Tx LED INDICATOR CHART Transmitter (Tx) LED Indicator Chart! Function Searching For Receiver Linked to Receiver Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status l l l l l l Flashing Green Solid Green Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF r o n q p l m k 29
Wi-AudioStream Rx FUNCTION MATRIX Receiver (Rx) Button Function Matrix! Function Button v POWER Pairing Mode z LINK/VoIP Voice Over IP MIC z LINK/VoIP Volume UP/Down xy Mute ON/OFF } Play/Pause } Next Track { Prev Track | Power ON/OFF 30 Activation Hold Time LED Status Press and Hold 3 sec Solid Green Press and Hold 3 sec Fast Green Flashes Click (With Optional USB Tx Dongle) Click Solid Green & Blue Click for Step, Press and Hold for Auto Click Press and Hold 3 s
Wi-AudioStream Rx LED INDICATOR CHART Receiver (Rx) LED Indicator Chart! Function Searching For Receiver Linked to Receiver Sleep Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status w w w w w w w Flashing Green Solid Green 2 Green Flashes (Activated By Tx) Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF | } y { z w x v 31
Wi-AudioStream PRODUCT SPECIFICATIONS Product Technical Specifications! Specifications Frequency: Frequency Response: Communications Frequency Selection: S/N Ratio: Audio Input / Output: Max Input Level: Max Output Level: Input Impedance: Output Impedance: Battery Life: Battery Type: 32 2.
Wi-AudioStream PRODUCT SPECIFICATIONS Specifications Battery Power Boost: 19.5 hours (With optional AA battery power booster adapter) USB Bus Power Low Battery Alert: Yes 15 Minutes of Life Left Power-up Modes Antenna: Range: Units operating at the same time: Signal Patch Audio Matrix: MAC/PC Compatible: VoIP Capable: 802.
Wi-AudioStream PRODUCT ACCESSORIES Audio Matrix Accessories for Extreme Flexibility! Accessory Specifications Wi-StudioM: Digital wireless studio monitors headphones Wi-USB Tx: Digital wireless USB transmitter for MAC/PC audio and VoIP applications Wi-iPod Tx: Digital wireless transmitter for Apple iPod Wi-AudioLink Tx: Digital wireless transmitter for Digital Pianos, Keyboards, Electric Guitars, Electric Acoustic Instruments, Digital Wind Instruments, Effects Pedals, Electroni
Wi-AudioStream ACEESSORIES Cable & Power Accessories for Extreme Flexibility! Accessory Specifications Wi-BodyFree Guitar Strap: Guitar strap with built-in “Wi-PowerBooster” AA battery power booster adapter, “Wi-AudioLink” Rx receiver socket and cable routing management system for the ultimate in BodyFree wireless performance experience.
Wi-AudioStream GREEN ENVIRONMENT Disposal and Recycling Information! Correct Disposal This symbol indicates that your product must be disposed of properly according to the local laws and regulations. When your product reaches its end of life, contact the retailer where the product was purchased or your local authorities to learn about recycling options. This product should not be mixed with other commercial wastes for disposal.
Wi-AudioStream FCC NOTICES Regulatory Compliance Information Compliance Statement This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. Disclaimers This manual is published by Jangus Music, Inc. The information contained in this document is subject to change without notice.
w w w.jangusmusic.com © 2009 Jangus Music, Inc. All rights reserved. Wi, Wi-AudioStream, Digital Wireless Stereo logo and Jangus Music logo are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners. (Design and specifications subject to change without notice).
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
