XG Series™ Quick Start Guide Purpose-Built Technology.® 022510XGabgFScom.
XG Series Quick Start Guide Copyright 2010 Janam Technologies LLC. All rights reserved. XG Series, XG100, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective owners Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide.
Content and Additional Resources To help you get started with your XG Series mobile computer, this guide features: - Hardware Overview - Getting Started - Regulatory Information For additional product details, visit www.janam.com. For software updates and information, visit www.microsoft.com. Janam XG.
Hardware Overview 1. Power 2. Right Function Key 3. Microphone 4. Front Indicator Lights LED 5. LCD 6. Navigation 7. Left Function Key 8. Escape/Clear 9. Indicator Light LED 10. Syncing/Charging Connector 11. Space 12. Green Control Shift 13. Enter 5 4 6 3 7 2 8 1 17 9 12 16 14. Blue Function Shift 15. Backspace 15 11 14 16. Orange Function Shift 17. Indicator Light LED For keypad variations, please visit the Resource Center at www.janam.com Janam XG.
Hardware Overview 1 2 3 5 7 8 10 4 1. Scan Window 2. Scan Trigger Button 3. Handle/Battery Chamber 4. Base of Battery & Battery Release Plunger 5. Lanyard Connector 6. Speaker 7. Memory Card Door 8. Memory Card Door Screws 9. Rear Indicator Lights (Tail Lights) 10. Syncing/Charging Connector 5 6 9 Janam XG.
Getting Started A. INSTALLING THE BATTERY 1. Insert the top of battery into chamber opening and gently slide battery into battery chamber (Figure 1). Do not force past point of resistance. 2. Turn the battery so that the base of the battery is perpendicular to the device handle (Figure 2). This aligns the battery notches with the battery chamber which is required to insert the battery. 3. Once the battery is properly aligned with the handle, press the battery into the battery chamber. 4.
Getting Started C. CHARGING THE BATTERY Important Note: The main battery charges the backup battery in the device. Once the main battery is fully charged, do not remove it from the unit for 24 hours. During this period, the device cannot maintain any user data if the battery is removed. To charge the battery using the USB Cable or Serial Cable: 1. Connect the power supply to the USB or serial cable. 2.
Getting Started D. CALIBRATING THE SCREEN The first time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen instructions using the stylus to tap the exact center of each target. Note: If your XG Series device came pre-loaded with a custom software application, the Welcome Utility may not appear. E.
Regulatory Information Regulatory Information Regulatory reference number: Model number XG100 All devices are designed to comply with local rules and regulations of the countries they are shipped to. Any changes or modifications made without Janam’s approval could void the user’s authority to operate the equipment. Only use Janam approved or recommended batteries and accessories. Use of alternative batteries or accessories will invalidate compliance approval and may be dangerous.
RF Exposure Guidelines This device was tested for typical body-worn operations. To maintain compliance with FCC and Canada RF exposure compliance requirements, use only Janam approved handstrap and accessories for this product. To comply with FCC RF exposure compliance requirements, the following antenna installation and device configurations must be satisfied: 1) Users are not permitted to make changes to or modify the system in any way, and 2) Connecting external antenna to the card is prohibited.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada Note à l’attention des utilisateurs canadiens/notice to users in Canada For Indoor Use.
European Regulatory Notice This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measure. Products bearing the CE marking comply with the following EU Directives: ▪ Low Voltage Directive 2006/95/EC ▪ EMC Directive 2004/108/EC CE compliance of this product is valid only if powered with the correct CE-marked AC adapter.
Notice for Italy for Use of 2.4 GHz Wireless Communication License required for use. Verify with your dealer or directly with the General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze). E’necessaria una concessione ministeriale anche per l’uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze. Notice for France for Use of 2.4 GHz Wireless Communication For 2.
Battery Safety Information Use only Janam-approved battery BAT-G1-001 and recharge batteries using only Janam-approved chargers. Observe the following guidelines for safe use of Li-Ion batteries. 1. 2. 3. 4. 5. Do not expose the battery to excessive heat or cold. Do not short-circuit. It may explode. To avoid risk of fire, burn or damage to your battery, do not allow a metal object to touch battery contacts. Do not disassemble the battery. There are no user serviceable parts inside.
www.janam.com Technology at Work.® Janam XG.
