XG Series™ Quick Start Guide Purpose-Built Technology.™ 1.
XG Series Quick Start Guide Copyright 2009 Janam Technologies LLC. All rights reserved. XG Series, XG100 (including XG100W-LBGDBV00, XG100W-LCGDBV00, XG100W-LDGDBV00, XG100W-LEGDBV00, and XG100W-LFGDBV00), Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective owners. Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide.
Content and Additional Resources To help you get started with your XG Series mobile computer, this guide features: - Hardware Overview - Getting Started - Regulatory Information For additional product details, visit www.janam.com. For software updates and information, visit www.microsoft.com.
Hardware Overview 1. Power 2. Right Function Key 3. Microphone 4. Front Indicator Lights LED 5. LCD 6. Navigation 7. Left Function Key 8. Escape/Clear 9. Indicator Light LED 10. Synching/Charging Connector 11. Space 12. Green Control Shift 13. Enter 5 4 6 3 7 2 8 1 17 9 12 16 14. Blue Function Shift 15. Backspace 15 11 14 16. Orange Function Shift 17.
Hardware Overview 1 2 3 5 7 8 10 4 1. Scan Window 2. Scan Trigger Button 3. Handle/Battery Chamber 4. Base of Battery & Battery Release Plunger 5. Lanyard Connector 6. Speaker 7. Memory Card Door 8. Memory Card Door Screws 9. Rear Indicator Lights (Tail Lights) 10.
Getting Started A. INSTALLING THE BATTERY 1. Insert the top of battery into chamber opening and gently slide battery into battery chamber (Figure 1). Do not force past point of resistance. 2. Turn the battery so that the base of the battery is perpendicular to the device handle (Figure 2). This aligns the battery notches with the battery chamber which is required to insert the battery. 3. Once the battery is properly aligned with the handle, press the battery into the battery chamber. 4.
Getting Started C. CHARGING THE BATTERY Important Note: The main battery charges the backup battery in the device. Once the main battery is fully charged, do not remove it from the unit for 24 hours. During this period, the device cannot maintain any user data if the battery is removed. To charge the battery using the USB Synching/Charging Cable or Serial Synching/Charging Cable: 1. Connect the power supply to the USB or Serial Synching/Charging cable. 2.
Getting Started D. CALIBRATING THE SCREEN The first time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen instructions using the stylus to tap the exact center of each target. Note: If your XG Series device came pre-loaded with a custom software application, the Welcome Utility may not appear. E.
Regulatory Information Regulatory Information Model number XG100 shall be considered the regulatory reference number. All devices are designed to comply with local rules and regulations to the countries they are shipped. Any changes or modifications made to Janam products without Janam’s approval could void the user’s authority to operate the equipment. Only use Janam approved or recommended accessories. Use of alternative accessories will invalidate approval given to the device and may be dangerous.
RF Exposure Guidelines This device was tested for typical body-worn operations. To maintain compliance with FCC and Canada RF exposure compliance requirements, use only Janam approved hand strap and accessories for this product. To comply with FCC RF exposure compliance requirements, the following antenna installation and device configurations must be satisfied: 1) Users are not permitted to make changes to or modify the system in any way, and 2) Connecting external antenna to the card is prohibited.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada Note à l’attention des utilisateurs canadiens/notice to users in Canada For Indoor Use.
Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity for this product or product family. This compliance is indicated by the following conformity marking placed on the product.
Battery Safety Information It is important to use batteries carefully. Use only Janam-approved battery BAT-G1-001 and recharge battery using only Janam-approved chargers. Observe the following guidelines for safe use of Li-Ion batteries. 1. 2. 3. 4. 5. Do not expose the battery to excessive heat or cold. Do not short-circuit. It may explode. To avoid risk of fire, burn or damage to your battery, do not allow a metal object to touch battery contacts. Do not disassemble the battery.
www.janam.com Technology at Work.