XP Series™ Quick Start Guide
XP Series Quick Start Guide The contents of this guide are confidential. Copyright 2006 Janam Technologies LLC. All rights reserved. XP Series, XP20, XP30, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective owners. Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide.
Content and Additional Resources To help you get started with your XP Series mobile computer, this guide features: - Hardware Overview - Installing the Battery - Getting Started For additional product details visit www.janam.com For Palm OS® software updates and information visit www.palmsource.
Hardware Overview 1 1. Power 2. Indicator LED 3. LCD 4. Connector 5. Scan Trigger 6. Right Trigger 7. Left Trigger 8. Navigation 9. Home 1 2 2 3 3 7 6 12. Programmable 6 8 12 5 14 12 10. Enter 11. Brightness/Contrast 7 12 9 8 13. Function 14. Backspace 9 15. Alpha/Numeric Shift 16. Space 17.
Hardware Overview 9 7 6 5a/5b Battery Compartment 1. Battery Door 2. Battery Screw 3. Reset 4. Microphone (XP30 Series) 5a. Speaker (XP30 Series) 8 5b. Buzzer (XP20 Series) 4 6. IrDA Window 7. Stylus 8. Stylus Slot 9.
Installing the Battery INSTALLING THE BATTERY 1. To access the battery compartment, turn the battery-screw counterclockwise to open the latch and remove battery cover. 2. Position the battery-lift strap, place the Lithium-ion battery and snap into place. 3. Replace the battery cover by positioning the top prongs first and sliding cover into place. Tighten battery-screw by turning clockwise.
Getting Started CALIBRATING THE SCREEN The first time the device is turned on, the Welcome Utility appears. To set up the device, follow the on-screen instructions using the stylus to tap the exact center of each target Note - If your XP Series device came pre-loaded with a custom software application, the Welcome Utility may not appear. BRIGHTNESS/CONTRAST/BACKLIGHT ADJUSTMENT Control PDA Keypad Numeric Keypad Brightness (XP30 Series) Press the brightness/contrast control on the keypad.
The CE Mark on the product indicates that the system has been tested to and conforms with the provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC Low Voltage Directive. For further information, please contact: Janam Technologies 40 Goosehill Road Cold Spring Harbor, NY 11724 Janam Technologies shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.
This Class B digital apparatus complies with the Canadian ICES-003. Cet appareil numerique de la Class B est conforme a la norm NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
RF, Regulatory and Safety Approvals Parameter Specification R&TTE EN 300 328:2004 EN 301 489-17:2000 EN 60950-1:2001 EN 50371:2001 This product is marked with in accordance with the Class II product requirements specified in the R&TTE Directive, 1005/5/EC. The equipment is intended for use throughout the European Community. Its authorization for use in France is restricted as follows. PAN European Frequency Range: 2.402-2.
Care and Cleaning of Terminals When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth. For European Community Users Janam Technologies complies with Directive 2002/69/EC of THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 27 January 2003 on waste electrical and electronic equipment (WEEE).
