R N LY XJ FO R R EF 24 ER .0 E 7. N 20 CE 15 O OWNER'S HANDBOOK Publication Part No.
L Introduction ABOUT THIS HANDBOOK Please take the time to study all of the owner/operator literature supplied with your vehicle as soon as possible. IMPORTANT The information contained in this handbook covers all vehicle derivatives and optional equipment, some of which will not be fitted to your vehicle. Due to printing cycles this handbook may include descriptions of options before they become generally available. R EF 24 ER .0 E 7.
R Contents N LY Media overview.............................107 AM/FM Radio................................114 DAB radio.....................................116 Portable media..............................118 Television......................................126 DVD player....................................128 Dual view......................................130 Headphones..................................132 Rear seat screens.........................133 Climate and comfort.....................
L Entering the vehicle R R EF 24 ER .0 E 7. N 20 CE 15 O N LY UNLOCKING THE VEHICLE FO To prevent accidental or unauthorised operation, never leave children or animals unattended in the vehicle. The vehicle can be operated when the Smart key is inside the vehicle. While a door is open, the locking latch is exposed. Do not attempt to manually close the latch as it may also automatically ‘soft close’ and trap items or body parts. 1. Lock: Press the lock button to secure the vehicle.
R Entering the vehicle 7. Emergency key cover: Slide and remove the cover to expose the emergency key. 8. Emergency key: Slide the key to remove and then unfold the handle. 9. To unlock or lock the door in an emergency (if the Smart key or Keyless entry fail to operate): Insert the emergency key blade into the slot in the door lock cover. • Carefully lift the key blade to lever the cover off the retaining clips. • Insert the key blade into the exposed lock to operate. R EF 24 ER .0 E 7.
L Entering the vehicle GLOBAL OPENING R EF 24 ER .0 E 7. N 20 CE 15 O If a Smart key is lost, a replacement can be obtained and reprogrammed to the vehicle by a Retailer/Authorised Repairer. Notify a Retailer/Authorised Repairer as soon as a Smart key is lost or stolen and have the remaining Smart key(s) reprogrammed. The security system fitted to your vehicle is Thatcham category 1 approved, and meets EU regulations 97/116 and EU directive 95/56 EC.
R Entering the vehicle • Driver position memory. • Seat and steering column adjustment. • Interior and exterior lighting. • Message centre. • Auxiliary power socket. Note: The radio frequency used by the Smart key may be used by other devices (e.g. medical equipment). This may prevent the Smart key from operating correctly. R EF 24 ER .0 E 7.
L Entering the vehicle 1. Slide the cover in the direction of the arrow until a click is heard. Remove the cover. 2. Use the emergency key blade to separate the Smart key body. N R EF 24 ER .0 E 7. N 20 CE 15 O Note: Handle a new battery with the outer edge. Avoid touching the top and bottom faces of the new battery, as moisture/oil from your fingers can reduce battery life and corrode the contacts. If skin contact is made clean with a lint free cloth. LY 3.
R Exiting the vehicle DOOR LOCKS AND RELEASE LEVERS While a door is open, the locking latch is exposed. Do not attempt to manually close the latch as it may also automatically ‘soft close’ and trap items or body parts. SINGLE LOCKING Press the lock button briefly. Single locking secures the vehicle and prevents the doors and luggage compartment being opened from outside of the vehicle. The doors can be unlocked and opened from inside the vehicle. The hazard warning lamps will flash once as confirmation.
L Exiting the vehicle If one or more of the doors fails to lock properly when a lock attempt is made using the Smart key, 2 warning tones will sound and one or more of the doors may not be locked. GLOBAL CLOSING To Single lock the vehicle, press the button on the door handle once. The hazard warning lamps will flash once as confirmation (in some markets, an audible warning will sound). To Double lock the vehicle, press the button twice within 3 seconds.
R Exiting the vehicle PASSIVE ARMING To set Perimeter alarm protection, press the lock button. The hazard warning lamps will flash to confirm the alarm state. This vehicle is fitted with a passive arming feature which can, if enabled, automatically arm the anti-theft system.
L Exiting the vehicle SENSOR FAULTS If the security systems detect a fault with one of the security sensors, an error tone will sound from the alarm after the vehicle is unlocked and disarmed. If this condition occurs, please visit your Retailer/Authorised Repairer for rectification. EMERGENCY LOCKING 1. Open the door and locate the emergency lock access cover. There is a small chamfer on the back of the cover; using a finger nail, push up and away from the door to remove the cover. 2.
R Front seats FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY ELECTRIC SEATS Do not adjust the seat while the vehicle is moving. Doing so could cause a loss of vehicle control and personal injury. 1. Cushion length adjustment. 2. Bolster adjustment (inflate/deflate).
L Front seats 3. Lumbar support adjustment. DRIVING POSITION MEMORY 4. Seatback angle adjustment. 5. Head restraint height adjustment. 6. Height adjustment. 7. Forward and rearward adjustment. 8. Cushion front tilt adjustment. To reset the seat: N If an obstruction is encountered while the seat is in motion, the seat will stop moving and further movement will be restricted until reset. LY To adjust the seats, the Smart key must be in the vehicle and the ignition switched on. R EF 24 ER .0 E 7.
R Front seats RESTRICTED SEAT TRAVEL If an obstruction is encountered while the seat is in motion, the seat will stop moving and further movement will be restricted until reset. To reset the seat: 2. Do not move the driver's seat too close to the steering wheel. Ideally, a minimum distance of 254 mm is recommended between the breastbone and the steering wheel airbag cover. Hold the steering wheel in the correct position with your arms slightly bent. R EF 24 ER .0 E 7. N 20 CE 15 O 1.
L Rear seats R EF 24 ER .0 E 7. N 20 CE 15 O N LY EXECUTIVE CLASS SEATS 1. Lumbar support adjustment. 2. Memory set button. 2. Forward and rearward seat adjustment. 3. Memory presets. Note: This is a 4-way switch when used to operate the front passenger seat. The switch is then used to adjust the forward and backward movement plus the raising and lowering of the seat. See item (4). 3. Seatback angle adjustment. 4.
R Rear seats REAR SEAT MASSAGE FOLDING TABLE If the vehicle is involved in an accident, or subject to sudden braking or direction change, loose items on the table can cause serious injury. R EF 24 ER .0 E 7. N 20 CE 15 O N LY Stow the table when not in use. 1. Massage: Press to switch the massage function on/off. 2. Press to select rolling wave. 3. Press to select lumbar wave. 4. Press to select shoulder wave.
L Rear seats All vehicle occupants should be seated correctly, and wear a seat belt at all times when the vehicle is in motion. FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY Do not cover the ventilation vents located in the parcel shelf behind the rear head restraint.
R Head restraints FRONT HEAD RESTRAINTS N 1. Pull the wing heads forward into the first or second position. R EF 24 ER .0 E 7. N 20 CE 15 O It is posible to swivel the head restraint forwards or backwards. For greater protection in the event of a collision, the head restraint should be adjusted so that it is as close to the back of the head as is practical. LY Adjust the head restraint so that the top of the head restraint is above the centre line of the head.
L Head restraints Note: The head restraint can only be removed if the seat is moved forward or back to create more space. N R EF 24 ER .0 E 7. N 20 CE 15 O Do not drive or carry passengers with the head restraint removed from an occupied seat. The absence of a correctly adjusted head restraint increases the risk of neck injury in the event of a collision. LY To remove the head restraint, adjust the angle of the back of the seat forward or back to create more space.
R Head restraints Make sure that the head restraint is refitted once the child seat is removed. Note: It is not possible to remove either the left or right rear head restraints. R EF 24 ER .0 E 7. N 20 CE 15 O N LY To refit the head restraint, make sure it is facing in the correct direction, insert the stems of the head restraint into the sockets and push it downwards until at least the first click. 1. Pull the wing heads forward into the first or second position. 2.
L Steering wheel ADJUSTING THE STEERING WHEEL Never adjust the steering wheel while the vehicle is moving. With the steering column adjustment control in the AUTO position, the steering column will move to provide easier entry and exit from the vehicle, as follows: • Exit: When the driver’s door is opened, the steering column will move to the uppermost tilt position.
R Seat belts R EF 24 ER .0 E 7. N 20 CE 15 O N LY USING THE SEAT BELTS FO R 1. Putting on a seat belt: Draw the belt out smoothly, making sure that the belt height, the seat and your position on the seat are correct. When correctly positioned, the seat belt should cross the collar bone at the mid-point between the neck and the end of your shoulder. Where possible, rear seat passengers should adjust their seating position to achieve the same seat belt position. 2.
L Seat belts LY Belts should not be worn with straps twisted. Each belt assembly must only be used by one occupant; it is dangerous to put a belt around a child being carried on the occupant’s lap. R EF 24 ER .0 E 7. N 20 CE 15 O Make sure the seat belt height is correctly adjusted and the mechanism is locked in place before driving. Maladjustment of the seat belt could reduce its effectiveness in a crash. Do not attempt to adjust the seat belt height once the vehicle is in motion.
R Seat belts Seat belts should be inspected or replaced by qualified personnel only. All replacement parts should be, at least, the same specification as the vehicle's original equipment. If in doubt, consult a Retailer/Authorised Repairer. R EF 24 ER .0 E 7. N 20 CE 15 O The seat belt pre-tensioners activate in conjunction with the Supplementary Restraint System (SRS) to provide additional protection in the event of a severe frontal impact.
L Seat belts SEAT BELT REMINDER Note: If the vehicle is parked on an incline, the seat belt mechanism may lock. This is a safety feature and the belt should be gently eased out from the upper anchorage. Seat belt reminder commences when the vehicle is in motion and the driver's seat belt is unbuckled. Dependent on the market, an audible chime sounds and the warning indicator in the Instrument panel illuminates. See 45, SEAT BELT (RED).
R Seat belts • Red - seat belt, in the indicated position, has been unfastened while the vehicle's ignition is on. This indicator will turn grey after 30 seconds. • Grey - seat belt not fastened. Note: The indicators will be displayed for 30 seconds each time there is a status change, e.g., a seat belt is unfastened or fastened, or a door is opened and then closed. • A rear seat belt is unfastened. N The seat belt of an occupied front seat is not fastened or is unfastened during a journey.
L Child safety Press the switch to activate the child door locks and to also inhibit the rear windows. The LED indicator will illuminate when active and a message will be displayed in the Message centre. To switch off, press the switch again. The LED lamp will extinguish and a message will display in the Message centre. CHILD SEATS FO R For optimum safety, children should travel in the rear of the vehicle at all times; front passenger seat travel is not recommended.
R Child safety If it is essential that a child travels in the front passenger seat (and national or state legislation permits this), Jaguar Land Rover Limited recommends that the following preparations are made before fitting the child restraint: Adjust the lumbar support to its minimum support position. • Adjust the seat cushion to its highest position. If cushion front tilt adjustment is possible, adjust it to its lowest position.
L Child safety Note: The legislation which governs how and where children should be carried when travelling in a vehicle, is subject to change. It is the responsibility of the driver to comply with all regulations in force.
R Child safety Mass group as shown on the child restraint Size classes Fixtures Second row Recommended outboard seats child restraint system Carrycot F ISO/L1 X - G ISO/L2 X - 0 Up to 10 kg 0 to 9 months E ISO/R1 IL 0+ Up to 13 kg 0 to 18 months E ISO/R1 LY ISOFIX Child seat positioning Britax/Römer Baby Safe Plus with Baby-Safe ISOFIX Base D ISO/R2 N R EF 24 ER .0 E 7.
L Child safety CHILD RESTRAINT CHECK LIST BOOSTER SEATS Every time a child travels in the vehicle, observe the following: In a situation where a child is too large to fit into a child safety seat, but is still too small to safely fit the 3-point belt, a booster seat is recommended for maximum safety. Follow the manufacturer's instructions for fitting and use, then adjust the seat belt to suit. • Adjust the harnesses for every child on every journey.
R Child safety Note: Always make sure that if an upper tether is provided, it is fitted and tightened correctly. Note: For child restraints fitted with a support leg, adjust the leg so that it rests firmly on the floor. INSTALLING TETHER ANCHORAGE CHILD RESTRAINTS N LY Always follow the child seat or restraint system manufacturer’s instructions when fitting tether straps. R EF 24 ER .0 E 7.
L R EF 24 ER .0 E 7. N 20 CE 15 O N LY Child safety Make sure that the rear seatback is securely and completely latched to the vehicle, in the normal upright position. 1. Pass the tether strap over the seatback and beneath the head restraint*. 2. Release the access cover for the relevant tether anchorage point. FO R 3. Attach the tether strap hook to the tether anchorage point. Make sure that the tether strap hook is facing towards the back of the seat. 4.
R Airbags R EF 24 ER .0 E 7. N 20 CE 15 O N LY AIRBAGS AND ACTIVE HEAD RESTRAINTS 1. Front passenger airbag. 2. Seat-mounted side airbags. FO R 3. The curtain airbags may deflate at a slower rate than the front or side airbags, to afford prolonged protection. 4. Driver’s airbag. Note: The general location of airbags fitted to the vehicle are marked by the word AIRBAG. Always contact your Retailer/Authorised Repairer if: • An airbag inflates. • The front or sides of the vehicle are damaged.
L Airbags Both front seats are equipped with Active Head Restraints (AHR) which reduce the risk of neck and spinal injury (whiplash). In the event of a rear impact, the head restraint moves upwards and forwards, supporting the occupant’s head. After activation, the whiplash protection mechanism resets automatically and does not need to be replaced. Airbag deployment is dependent on the rate at which the passenger compartment changes velocity following the collision.
R Airbags SIDE AIRBAGS These are designed to protect the thorax region of the torso and will deploy only in the event of a side impact and then, only on the side of the impact. R EF 24 ER .0 E 7. N 20 CE 15 O Do not attach or position items on, or close to, the roof lining, front seat backrests, or to an airbag cover, which could interfere with the inflation of the airbag or be propelled inside the vehicle, causing injury to the occupants.
L Airbags If the warning lamp indicates that a fault is present in the system, do not use a child restraint on the front passenger seat. AIRBAG DEPLOYMENT EFFECTS If any of the following warning lamp conditions occur, the vehicle should be checked by your Retailer/Authorised Repairer immediately: The warning lamp fails to illuminate when the ignition is switched on. • The warning lamp fails to extinguish within 6 seconds of the ignition being switched on.
R Airbags Do not attempt to service, repair, replace, modify, or tamper with, any part of the SRS. This includes wiring or components in the vicinity of SRS components. Doing so may cause the system to trigger, or render the system inoperative. N R EF 24 ER .0 E 7.
L Instrument panel R EF 24 ER .0 E 7. N 20 CE 15 O N LY INSTRUMENT PANEL 7. External temperature. 1. Tachometer. 2. Gear selector position display. 8. Trip information. 3. Temperature gauge. 9. Total distance (odometer). FO R Serious engine damage can occur if the vehicle is driven while the engine is overheating. If the pointer moves onto the red line, the engine is overheating. Stop the vehicle as soon as safety permits and allow the engine to idle until the temperature reduces.
R Instrument panel INSTRUMENT PANEL MENU • A number of vehicle features and display settings may be configured via the Instrument panel menu. Service: Displays with the ignition on and the engine running. • Source • Queue/Favourites: Dependant on the source selected. • Recents: Displays with the phone connected. • Display Theme N LY Info panel: Select to change the information displayed within the Instrument panel. R EF 24 ER .0 E 7.
L Instrument panel The distance, average speed and average fuel economy values for trip A and trip B can be reset. Set the Trip computer display to show the trip that you wish to reset, then press and hold the TRIP button until the message resetting trip is displayed. It is not possible to manually reset the Auto trip memory. This resets automatically each time the ignition is switched on. R EF 24 ER .0 E 7.
R Instrument panel METRIC/IMPERIAL/MIXED DISPLAY The Trip computer readings can be changed between metric, imperial and mixed units in the Trip Computer menu of the Message centre. See 41, INSTRUMENT PANEL MENU. Note: Temperature display can be changed between °C (Celsius) and °F (Fahrenheit) independently of Metric or Imperial units. N R EF 24 ER .0 E 7.
L Warning lamps AMBER and YELLOW warning lamps are for secondary warnings. Some indicate that a vehicle system is in operation, others indicate that the driver must take action and then seek qualified assistance as soon as possible. LAMP CHECK A warning lamp bulb check is initiated when the ignition system is switched on and lasts for 3 seconds (except for the airbag warning lamp which will remain on for 6 seconds). If any warning lamp remains on after this period, investigate the cause before driving.
R Warning lamps BATTERY CHARGE (RED) Illuminates as a bulb check, when the ignition is switched on and extinguishes when the engine is started. Illuminates briefly as a bulb check when the ignition is switched on. If the lamp remains on or illuminates while driving, there is a fault with the ABS system. Drive with care, avoiding heavy brake application and seek qualified assistance urgently. R EF 24 ER .0 E 7.
L Warning lamps DYNAMIC STABILITY CONTROL (DSC) (AMBER) Illuminates briefly as a bulb check when the ignition is switched on. If the lamp illuminates when driving, there is a fault with the airbag system. Seek qualified assistance as soon as possible. LOW FUEL WARNING (AMBER) Illuminates when the fuel level is low. Refuel at the earliest opportunity. R EF 24 ER .0 E 7. N 20 CE 15 O If the lamp flashes while driving, the DSC system is active.
R Warning lamps The lamp will flash to indicate a system fault. Note: Other warnings normally associated with an engine shutdown, for example the ignition warning lamp, do not illuminate during an engine shutdown by the Intelligent Stop/Start system. FORWARD ALERT (GREEN) Illuminates when Forward alert is active. R EF 24 ER .0 E 7. N 20 CE 15 O HIGH BEAM (BLUE) Illuminates when the engine is shut down by the Intelligent Stop/Start system.
L Warning lamps AUDIBLE WARNINGS AND INDICATORS Hazard or Condition Chime or tone/remedy External lamps remain on when A chime will sound until the lamps are switched off or the driver’s the driver’s door is opened. door is closed (unless the lighting control is in the AUTO position). A ticking will sound until the hazard indicators are switched off. Direction indicators on. A ticking will sound until the indicators are switched off. Memory 1 (2 or 3) settings saved.
R Exterior lights R EF 24 ER .0 E 7. N 20 CE 15 O N LY LIGHTING CONTROL 1. With the headlamps on, push the switch away from the steering wheel to select high beam. The blue warning indicator in the Instrument panel will illuminate. 2. Pull the switch towards the steering wheel and release to flash the high beam on and off. The high beam will remain on for as long as the switch is held. R 3. Side lamps. 4. Low beam. FO 5.
L Exterior lights The Electric Parking Brake (EPB) is not applied (is released) - market dependent. APPROACH LAMPS AUTO HIGH BEAM This feature automatically selects and deselects high beam, under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only active when the ambient light drops below a predetermined level. R EF 24 ER .0 E 7.
R Exterior lights Dimly lit road users, for example, cyclists and pedestrians. • Adverse weather conditions, for example, fog, heavy rain and snow. • Dirty or obscured sensor. • Dirty, damaged, or misted windscreen. • Oncoming vehicles partially obscured by a central road barrier. • An icy or frosted windscreen. N Highly reflective road signs. • R EF 24 ER .0 E 7.
L Interior lights FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY INTERIOR LIGHTS 1. Front seat foot-well illumination. 2. Glove box lamp. 3. Vanity mirror lamps. 4. Rear seat foot-well illumination. 5. Rear vanity mirror lamps (long wheelbase vehicles only). 52 6. Front reading lamps: Touch the lens briefly to switch on/off or for approximately 2 seconds to switch automatic illumination of the rear interior lamps on/off. 7.
R Interior lights R EF 24 ER .0 E 7. N 20 CE 15 O 9. Rear reading lamps: Press the appropriate switch to activate a reading lamp manually. N 8. Rear interior and reading lamps: All 3 lamps switch on automatically when the rear doors are opened. Press the appropriate switch to activate the outer reading lamps manually. LY The lamps are operated by proximity sensors. Move your finger close to (or touch) the appropriate lens to switch on/off.
L Wipers and washers WIPER OPERATION 5. Pull the wiper/washer control towards the driver for a single wipe, or hold for further continuous wipes. LY 6. Windscreen wash/wipe: Press and release to start a wash/wipe programme consisting of a number of low speed wipes. Washer fluid is sprayed during the up-stoke of the first 2 wipes. Continue to hold if additional washer fluid is required. A few seconds after the programme finishes a drip wipe will clear any residual fluid from the windscreen. R EF 24 ER .
R Wipers and washers Note: To set the wipers in the service position for maintenance, see 197, WIPERS SERVICE POSITION. The Rain sensor feature can be enabled/disabled in the Instrument panel menu. See 41, INSTRUMENT PANEL MENU. SPEED-DEPENDENT MODE HEADLAMP WASHERS If the vehicle decelerates to a stop with the wipers operating*, the wipers will switch to the next lowest speed. When vehicle speed increases to over 8 km/h (5 mph), the original wiper speed settings are restored.
L Mirrors R EF 24 ER .0 E 7. N 20 CE 15 O N LY EXTERIOR MIRRORS 1. Left mirror adjustment. R 2. Right mirror adjustment. FO 3. Powerfold/unfold: Press both buttons simultaneously. This feature is inhibited at speeds over 110 km/h (70 mph). The mirrors can be adjusted and folded when the ignition is on and for up to 5 minutes after the ignition is switched off, provided the driver’s door is not opened.
R Mirrors Note: Up to 3 different exterior mirror positions can be stored and recalled using the driving position memory feature. See 14, DRIVING POSITION MEMORY. MIRROR DIP WHEN REVERSING N R EF 24 ER .0 E 7. N 20 CE 15 O The exact dipped position can be adjusted using the joystick control, when the mirror is dipped. The next time reverse is selected, the newly adjusted position will be selected.
L Garage door opener RADIO FREQUENCY TRANSCEIVER PROGRAMMING In some countries, the Radio Frequency (RF) transceiver is also known as the HomeLink® Universal Transceiver. N To program the RF transceiver: R EF 24 ER .0 E 7. N 20 CE 15 O Do not use the RF transceiver with any garage door opener that lacks the safety stop and reverse feature, as required by safety standards. LY The RF transceiver is located in the rear view mirror.
R Garage door opener Note: You may need to press and hold the memory button on the RF transceiver for 2 seconds, a further 2 times. Note: Do not press and hold the buttons for longer than 20 seconds. INFORMATION AND ASSISTANCE It is recommended that when you sell the vehicle, you erase all programming from the RF transceiver. R EF 24 ER .0 E 7. N 20 CE 15 O Note: Some entry gate systems require you to cycle (press and re-press) the hand-held transmitter every 2 seconds during programming.
L Windows R EF 24 ER .0 E 7. N 20 CE 15 O N LY ELECTRIC WINDOWS FO R 1. Front window switches: The windows will operate for 5 minutes after the engine is switched off, as long as none of the doors are opened. Make sure that the Smart key is removed when leaving passengers in the vehicle. This will prevent unsupervised operation of the windows, sun blinds and sunroof, which may result in injury. Any ice should be removed from the windows prior to operation. 2.
R Windows The roof blinds are electrically operated. Do not try to operate them manually. To lower the door sun blind: Push down and release the rear door window switch. Note: The door sun blinds will operate for 5 minutes after the engine is switched off, unless a door is opened. Door sun blind restrictions: • All rear window switches will operate the respective door sun blinds. R EF 24 ER .0 E 7.
L Windows Briefly press the switch down fully and release a second time, to fully open the window. The anti-trap mechanism can be overridden to allow the roof to be closed when movement is restricted by dirt. To override the anti-trap mechanism, press and hold the front of the switch until the roof reaches the closed position. If the sunroof fails to operate correctly, it may need to be reset. See 197, SUNROOF RESET. R EF 24 ER .0 E 7.
R Storage compartments FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY STORAGE COMPARTMENTS 1. Cubby box: To access, press the button. 2. Cup holders: To access, slide the covers apart. Do not drink, or use the drinks holders when driving. 3. Storage area or ashtray (depending on vehicle specification): Press and release, where indicated, to open. 4. Glove-box: Open using the glove-box release (arrowed). Note: When Valet Mode is selected, the glove-box release is disabled. 5.
L Storage compartments 7. Rear door stowage. AUXILIARY POWER SOCKETS Only use Jaguar approved accessories. Using any other equipment may damage the vehicle's electrical system. If you are in any doubt, contact a Retailer/ Authorised Repairer. R EF 24 ER .0 E 7. N 20 CE 15 O N LY Executive class rear seats 1. Cup holders: To access, press the button. Do not drink, or use the drinks holders when driving. 2. Storage area. FO R 3. Rear storage compartment: To access, press the button.
R Luggage compartment OPENING AND CLOSING THE LUGGAGE COMPARTMENT R EF 24 ER .0 E 7. N 20 CE 15 O The vehicle must not be driven with the luggage compartment lid unlatched and not completely closed. N The Smart key may not be detected if it is placed within a metal container, or if it is shielded by a device with a back-lit LCD screen, such as a smart phone, laptop (including in a laptop bag), games console, etc. LY Do not open the luggage compartment if a cycle rack is fitted.
L Luggage compartment While the powered luggage compartment is open, the locking latch is exposed. Do not attempt to manually close the latch, as it may also automatically soft-close and trap items or body parts. If a valid Smart key is detected within the vehicle, or a valid Smart key is not detected within a metre of the rear of the vehicle, then the luggage compartment lid will re-open to the unlatched position and an audible mislock warning will sound.
R Luggage compartment LUGGAGE ANCHOR POINTS LUGGAGE COMPARTMENT EMERGENCY RELEASE R EF 24 ER .0 E 7. N 20 CE 15 O N LY The mechanical luggage compartment release provides a means of escape in the event of someone being locked in the luggage compartment. Adults are advised to familiarise themselves with the operation of the release handle. All items carried in the vehicle should be properly secured. Four load securing points are provided in the rear luggage area to assist in safely securing items.
L Luggage compartment LUGGAGE COMPARTMENT RELEASE WHEN BATTERY IS DISCHARGED FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY If the battery becomes discharged when the luggage compartment is shut, it will be necessary to supply power to the release circuit in order to open it. Supplying power to the release circuit in the following manner may cause a fuse to blow. For this reason it is recommended that the following procedure is only carried out by suitably qualified persons.
R Luggage compartment 2. Attach the positive jump lead clamp to the positive terminal. 3. Attach the negative jump lead clamp to the earthing post. 4. Press the luggage compartment release button on the remote control. FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY Do not attempt to start the vehicle with power supplied in this way.
L Starting the engine If the engine fails to start, do not continue cranking as this will discharge the battery. It may also damage the catalytic convertor due to unburnt fuel passing through the exhaust. SWITCHING OFF THE ENGINE When the vehicle is stationary: 1. Make sure that the vehicle is parked with Park (P) selected and the parking brake applied. R EF 24 ER .0 E 7.
R Starting the engine 3. Release the engine START/STOP button. If the brake pedal is applied when the engine START/STOP button is pressed, the engine will start. ROLLING RE-START IF THE ENGINE FAILS TO START Note: If the engine fails to crank when the engine START/STOP button is pressed and there has been a recent collision, the fuel system inertia switch may have been tripped. Seek qualified assistance. Note: The following information applies to petrol engine vehicles only. R EF 24 ER .0 E 7.
L Intelligent stop/start Note: Always disable the Intelligent stop/start system before wading. To activate an automatic engine stop, stop the vehicle from a speed greater than 4 km/h (2.5 mph). Apply sufficient brake pressure to make sure the vehicle is stationary. To activate an automatic engine restart, release the brake pedal with Drive (D) or Sport (S) selected. The engine will also restart if one of the following occurs: Intelligent stop/start is deactivated. • The accelerator pedal is pressed.
R Intelligent stop/start Note: The Intelligent stop/start system will automatically reactivate the next time the vehicle's ignition is switched on. DRIVER EXIT Note: The Driver exit feature is only available when Intelligent stop/start is enabled. N R EF 24 ER .0 E 7.
L Gearbox R EF 24 ER .0 E 7. N 20 CE 15 O N LY AUTOMATIC TRANSMISSION 1. To select Drive (D) or Reverse (R) gear, press the brake pedal and rotate the rotary drive selector. FO R 2. To select Sport mode, from D press the rotary drive selector down and rotate to S. 3. Gear shift paddles (left paddle for downshifts, right paddle for upshifts), see 75, MANUAL GEAR SELECTION. Note: The gear shift paddles can be configured to operate in 'S only' or 'D and S' via the Driving Features menu.
R Gearbox P should be selected before switching off the engine. However, it is possible to switch the engine off with R, D, or S selected - the selector will automatically select P, while retracting into the centre console. Note: If the engine is switched off with N selected, the system will wait for 10 minutes before selecting P. This procedure is to allow the vehicle to be conveyed through a car wash only and should not be used for vehicle recovery purposes. R EF 24 ER .0 E 7.
L Stability control TRACDSC • The warning lamp in the instrument panel will illuminate while TracDSC is selected. • The warning lamp will flash when DSC or TracDSC is active (cruise control will automatically disengage if this occurs). R EF 24 ER .0 E 7. N 20 CE 15 O DSC optimises vehicle stability, even in critical driving situations. The system controls dynamic stability when accelerating and when starting from a standstill.
R Stability control If the warning message EDIFF SYSTEM FAULT is displayed and DSC is off, then TracDSC will be automatically selected. The vehicle can still be driven and DSC modes can be selected, but seek qualified assistance as soon as possible. FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY If the warning message EDIFF NOT AVAILABLE is displayed, the system has temporarily shut down to prevent overheating.
L Suspension ADAPTIVE DYNAMICS FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY If the general warning lamp illuminates (see 44, GENERAL WARNING/INFORMATION MESSAGE (AMBER)) and the message ADAPTIVE DYNAMICS FAULT is displayed in the Message centre, some reduction in ride comfort may be experienced. If the fault persists, consult a Retailer/Authorised Repairer.
R Brakes Never allow the vehicle to coast (freewheel) with the engine switched off. The engine must be running to provide full braking assistance. The brakes will still function with the engine off, but far more pressure will be required to operate them. EBA stops operating as soon as the brake pedal is released. A fault with the EBA system is indicated by the brake warning lamp (see 45, BRAKE (AMBER)) illuminating and an associated warning message.
L Brakes ELECTRIC PARKING BRAKE (EPB) The parking brakes operate on the rear wheels. Therefore, secure parking of the vehicle is dependent on being on a hard and stable surface. If the EPB is inadvertently applied when the vehicle is moving at above 3 km/h (1.8 mph), Caution! Park Brake Applied is displayed in the Message centre, the warning indicator in the Instrument panel will illuminate and a warning chime will sound.
R Automatic speed limiter (ASL) N LY ASL CONTROLS When a speed has been set, the engine will respond normally up to the set speed. Further accelerator pressure will not increase the speed beyond the set speed unless sudden, rapid acceleration (kickdown) is applied. If kickdown is initiated, ASL will be suspended and will not be reactivated until the vehicle speed is below the set speed. R EF 24 ER .0 E 7. N 20 CE 15 O ASL allows a speed limit to be set that the driver does not wish to exceed.
L Cruise control USING CRUISE CONTROL Note: If the accelerator pedal is pressed for more than 5 minutes, cruise control will be cancelled. R EF 24 ER .0 E 7. N 20 CE 15 O N LY In certain conditions, such as a steep gradient, the vehicle speed may exceed the set cruising speed. This is because engine braking is unable to maintain or reduce the vehicle speed. Driver intervention may be required. The system is operated by controls mounted on the steering wheel.
R Adaptive cruise control ACC is not a collision warning or avoidance system. Additionally, ACC will not react to: • Pedestrians or objects in the roadway. • Oncoming vehicles in the same lane. Setting the vehicle's speed, activating and deactivating ACC is done in the same way as using Cruise control. See 82, USING CRUISE CONTROL. R EF 24 ER .0 E 7. N 20 CE 15 O The ACC system uses a radar sensor, which projects a beam directly forward of the vehicle, to detect objects ahead.
L Adaptive cruise control • The vehicle ahead accelerates to a speed above the set speed. • The vehicle ahead moves out of lane or out of view. • A new gap distance is set. If necessary, the vehicle's brakes will be automatically applied, slowing the vehicle and maintaining the gap to the vehicle in front. The maximum braking which is applied by the ACC system is limited and can be overridden by the driver applying the brakes, if required. Note: Driver braking will cancel ACC.
R Adaptive cruise control If a vehicle ahead slows to a halt, Queue assist will bring the vehicle to a stop and hold it stationary. While the vehicle is held stationary, Queue assist will request the Electric Parking Brake (EPB) to apply if: The driver cancels Queue assist. • The vehicle is stopped for more than 3 minutes. • Driver intention to exit the vehicle is detected. FO R • • • The CAN button is pressed. • The brake pedal is pressed.
L Adaptive cruise control HINTS ON DRIVING WITH ACC DETECTION BEAM ISSUES The system acts by regulating the speed of the vehicle using engine control and the brakes. Gear changes may occur in response to deceleration or acceleration while in ACC mode. A failure has occurred while the system is active. • That using maximum ACC braking only is not sufficient. R EF 24 ER .0 E 7.
R Adaptive cruise control 4. When moving around a stationary vehicle. This may cause uncertainty as to which vehicle should be followed. In these cases, ACC may brake late or unexpectedly. The driver should stay alert and intervene, if necessary. Tyres other than those recommended for your vehicle, may have different sizes. This can affect the correct operation of the ACC. ACC MALFUNCTION FORWARD ALERT FUNCTION N The system may not react to slow moving vehicles. R EF 24 ER .0 E 7.
L Adaptive cruise control ADVANCED EMERGENCY BRAKE ASSIST The system may not react to slow moving vehicles and will not react to stationary vehicles or vehicles travelling in the opposite direction. INTELLIGENT EMERGENCY BRAKING The Intelligent Emergency Braking (IEB) system may not react to slow moving vehicles. R EF 24 ER .0 E 7. N 20 CE 15 O Warnings may not appear if the distance to the vehicle ahead is very small or if steering wheel or pedal movements are large (e.g. to avoid a collision).
R Adaptive cruise control If an imminent risk of collision occurs, an audible warning is given. If a collision becomes unavoidable, IEB will apply the brakes at up to maximum pressure. After IEB has activated, IEB System Was Activated is displayed in the Message centre and the system is inhibited from further operation until reset by a Retailer/ Authorised Repairer. N FO R R EF 24 ER .0 E 7.
L Driving modes DRIVING MODES OPERATION DYNAMIC Changing between the driving modes will alter various vehicle settings, for example, engine revs may alter on selection of a different driving mode, while at a constant accelerator pedal position, and steering system feel may also become heavier or lighter. These changes are not dramatic but will be noticeable. • Press the driving mode button once - the driving mode icons will appear in the Message centre.
R Driving modes FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY Note: The Winter driving mode cannot be active at the same time as the Dynamic driving mode. The Winter driving mode will remain selected indefinitely, even after the ignition is switched off. The Winter driving mode must be deselected if no longer required.
L Driving aids • When the vehicle's speed equals the detected speed limit. • When the vehicle's speed is 5 mph or 10 km/h above the detected speed limit; dependent on the Instrument panel being configured to display in mph or km/h. R EF 24 ER .0 E 7.
R Driving aids • Non-conforming road signs. BLIND SPOT MONITOR N R EF 24 ER .0 E 7. N 20 CE 15 O The BSM may not be able to give adequate warning of vehicles approaching very quickly from behind or vehicles that are being overtaken rapidly. LY The Blind Spot Monitor (BSM) system is a supplement to, not a replacement for, a safe driving style and use of the exterior and rear-view mirrors. The system may not function under all speeds, weather and road conditions.
L Driving aids Note: If rapidly overtaking vehicles are detected on both sides simultaneously, the warning icons in both mirrors will flash. The indicator dot (3) remains illuminated until the vehicle's forward speed exceeds 10 km/h (6 mph). The BSM is automatically disabled and an amber warning indicator dot is displayed in the exterior mirrors when: Reverse (R) gear is selected. • Park (P) is selected for vehicles with automatic transmission. • The vehicle's speed is below 6 km/h (4 mph).
R Note: When the BSM is disabled, Closing vehicle sensing is also disabled. See 41, INSTRUMENT PANEL MENU. R EF 24 ER .0 E 7. N 20 CE 15 O In addition to the functionality provided by the Blind Spot Monitor (BSM), Closing vehicle sensing monitors a larger area behind the vehicle. Closing vehicle sensing is designed to perform best on multi-lane motorways with free-flowing traffic and is operational above 10 km/h (6 mph) in a forward gear. N LY Driving aids 1.
L Driving aids Note: Even if the detected fault affects the radar sensor on only one side of the vehicle, the whole system is disabled. If the fault is temporary, the system will operate correctly once the engine has been switched off and then on again. FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY If a fault in the system occurs, consult a Retailer/Authorised Repairer.
R Progress control system Note: Any gear selector position can be used, including Neutral (N). • Release the Electric Parking Brake (EPB) or the brake pedal, to allow gravity to make the vehicle progress, up to the minimum feature speed of 3.6 km/h (2.2 mph). • Progress control will hold this speed, until the system detects the use of the accelerator pedal, brake pedal, or the Cruise control SET+ button on the steering wheel.
L Progress control system Note: If the vehicle's brakes are firmly applied, during the operation of Progress control, the system will exit the full function mode and will then enter into the descent control mode. Note: The driver can override the Progress control system at any time, with the use of the brake pedal or the accelerator pedal. Do not attempt a steep descent if the Progress control system is not enabled or the warning message is displayed. R EF 24 ER .0 E 7.
R Progress control system Note: Light and gentle application of the brake pedal will also lower the target vehicle speed. When the brake pedal is fully released, the Progress control system will maintain the speed at which the brake pedal was released. If the brake pedal is pressed when the Progress control system is active, then a slight pulsation movement might be felt through the brake pedal. CAN: Press to put the Progress control system into descent control mode.
L Touch screen - Home R EF 24 ER .0 E 7. N 20 CE 15 O N LY TOUCH SCREEN HOME MENU R Always run the engine during prolonged use of the Touch screen. Failure to do so may discharge the vehicle's battery; preventing the engine from starting. FO Avoid spilling or splashing liquids onto the Touch screen. 1. Touch to return to a higher menu level. Note: The Return icon will be disabled on the HOME screen. 2. Touch the screen or press the button, to select the PHONE screen. 3.
R Touch screen - Home 9. Touch to select the SEAT COMFORT screen. See 141, HEATED SEATS, 142, CLIMATE SEATS, 142, SEAT MASSAGE. Traffic Alerts. 10. Touch the arrow or swipe the screen to the left, to select the EXTRA FEATURES screens. Wi-FI signal. Connecting. 11. Touch to set a destination or to cancel guidance if a destination is already set. 12. Touch to select the NAVIGATION assistance map. LY Phone set to divert incoming calls. 13. Touch to select Home Settings, via the SETTINGS pop-up menu.
L Touch screen - My home R EF 24 ER .0 E 7. N 20 CE 15 O N LY MY HOME SCREEN The MY HOME screen enables the user to display and arrange widgets and shortcuts to applications. 1. MY HOME screen: Multiple screens are available. R 2. Widgets and shortcuts: These are available in different sizes and can be moved to different locations. FO 3. Personalised MY HOME screen name: Touch to edit. 4. Touch the arrows or swipe the screen to view other MY HOME screens, or return to the HOME screen. 5.
R Touch screen - My home Edit a personalised screen name: Touch the screen name and enter text using the keyboard; touch OK to complete. N R EF 24 ER .0 E 7. N 20 CE 15 O Adding a screen: While in the PREVIEWS screen, touch the Edit icon or touch and hold the screen to display the EDIT PREVIEWS screen. Touch the + symbol to create a new MY HOME screen. When adding or moving a widget, it can be dragged to the left side of the screen; this will then create a new MY HOME screen.
L Touch screen - Extra features • Rear Media: See 108, REAR MEDIA CONTROL FROM THE TOUCH SCREEN. • Eco Data: The Eco Data system is designed to help the driver maximise fuel economy by providing vehicle data and driving tips. Real time Eco Data can also be displayed in the Instrument panel. Cameras: See 153, SURROUND CAMERA SYSTEM. • InControl Apps: See 182, INCONTROL APPS. • Live: See 182, INCONTROL PRO SERVICES. • Seats: See 141, SEAT COMFORT AND ADJUSTMENT.
R Touch screen - Extra features FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY Note: If the Master PIN is forgotten, Valet mode can only be deactivated by your Retailer/ Authorised Repairer.
L Touch screen - Settings • Live Touch the Settings icon from any screen, followed by All Settings and then General. • Voice • Bluetooth. The General settings menu is divided into categories: Touch to display the list of settings for the required system. • Note: The list will vary, depending on the specification of the vehicle. Time and Date Display • Screensaver • Master PIN R EF 24 ER .0 E 7.
R Media overview R EF 24 ER .0 E 7. N 20 CE 15 O N LY MEDIA CONTROLS In the interest of safety, only operate, adjust or view the system when it is safe to do so. Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. 1. On/off and volume control: Press to switch the system on/off. • Rotate to adjust the volume level (displayed on the Touch screen). 7. Press to select DUAL VIEW or the Audio Settings menu. See 130, DUAL VIEW CONTROLS or 109, AUDIO SETTINGS.
L Media overview R EF 24 ER .0 E 7. N 20 CE 15 O N LY REAR MEDIA CONTROL FROM THE TOUCH SCREEN Touch Rear Media on the media screen, to select the REAR MEDIA control screen. AUDIO STEERING WHEEL CONTROLS 1. Touch to select the rear media source. 2. Touch to switch the left-side rear screen on/off. R 3. Touch to switch the right-side rear screen on/off. FO 4. Touch to access the Rear Media Settings via the SETTINGS pop-up menu. 5. Touch to lock or unlock the remote control. 6.
R Media overview • To select the next radio favourite. • To select the next track on the chosen media source - CD, MP3, etc. • When the phone is in use, press to scroll up lists of calls or contact entries. • Touch + or - to adjust the Bass, Treble or Subwoofer levels. Alternatively, touch the slider bar and drag or touch anywhere on the bar and release. To adjust balance and fade: To select the next TV channel on the channel list or the next video/DVD chapter.
L Media overview Recordable (CD-R) discs and re-writable (CD-RW) discs may not function correctly. Recordable (DVD-R or DVD+R) discs may not function correctly. GRACENOTE® END USER LICENSING AGREEMENT R EF 24 ER .0 E 7. N 20 CE 15 O Dual-format and dual-sided discs (DVD Plus, CD-DVD format) are thicker than normal CDs and so playback cannot be guaranteed and jamming may occur.
R Media overview LY R EF 24 ER .0 E 7. N 20 CE 15 O You agree that your non-exclusive licence to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your licence terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights.
L Media overview N LY LICENSING R EF 24 ER .0 E 7. N 20 CE 15 O Manufactured under licence, under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Manufactured under licence from Dolby Laboratories.
R N FO R R EF 24 ER .0 E 7. N 20 CE 15 O CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000 to present Gracenote. Gracenote Software, copyright © 2000 to present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non-exhaustive list of applicable Gracenote patents.
L AM/FM Radio R EF 24 ER .0 E 7. N 20 CE 15 O N LY AM/FM RADIO CONTROLS In the interest of safety, only operate or adjust the system when it is safe to do so. Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. 1. Rear Media: Select for rear media options. R 2. Find: Touch to display options for finding a required station, frequency or genre. STATION LIST: Touch the Station list icon to display a list of available stations on the selected waveband.
R AM/FM Radio 8. Displays information from the broadcasting station. Touch to view further information (if available); touch again to close the further information display. 9. Seek up: • Touch or swipe the Touch screen from right to left, to seek up to the next radio station. Note: Not all FM radio stations broadcast RDS information. Select AM/FM Settings via the SETTINGS pop-up menu, to view or alter the RDS settings. • RDS: Select ON or OFF. • Traffic Alerts (TA): Provides local travel information.
L DAB radio R EF 24 ER .0 E 7. N 20 CE 15 O N LY DAB RADIO CONTROLS In the interest of safety, only operate or adjust the system when it is safe to do so. Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. 1. Rear Media: Select for rear media options. • • 116 DAB STATION LIST: Touch to view a list of available channels. The list is arranged in alphabetical order; select the up or down arrows to scroll through the list. FO • R 2.
R DAB radio 10. Touch the Favourite icon to add to or delete from RADIO FAVOURITES. This will be highlighted when a tuned station is set as a favourite. • Select Announcements, (Traffic, News, etc.) from the list. The selected announcements will interrupt the current programme, when broadcast. N R EF 24 ER .0 E 7. N 20 CE 15 O 12. Select DAB Settings via the SETTINGS pop-up menu. Touch to manage the following features: Link to FM Stations, Frequency Band and Announcements. See 117, DAB RADIO SETTINGS.
L Portable media Compatible portable devices include: • USB mass storage devices (e.g., a memory stick). Devices must use FAT or FAT32. • Optical media (Album CDs or DVDs). • iPod (iPad, iPod Touch, iPhone, iPod Nano and iPod Classic Gen4, Gen5, Gen6 are supported - full functionality for older devices cannot be guaranteed). iPod Classic Gen1, Gen2, Gen3 and iPod Shuffle are not supported. • Media devices that support HDMI or MHL.
R Portable media CONNECTING A MEDIA DEVICE Note: On vehicles fitted with Executive class rear seats, the Rear media connection sockets are located in the rear storage compartment in the centre armrest. See 63, STORAGE COMPARTMENTS. Note: Use the cable supplied with your media device to connect to the USB socket. Note: High quality cables are recommended to be used with Apple devices as this will enhance operation.
L Portable media R EF 24 ER .0 E 7. N 20 CE 15 O N LY PORTABLE MEDIA CONTROLS Do not adjust the main audio unit's controls, or allow the system to distract the driver while the vehicle is moving. Driver distraction can lead to accidents, causing serious injury or death. FO R Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. See 107, MEDIA CONTROLS.
R Portable media • To return to the MEDIA LIBRARY screen, touch the Return icon. 4. Source: Displays all Media sources. • The list of media devices will be dynamically populated based on whether they are connected. Note: Sound quality and volume levels available from connected media devices may vary widely. Note: When a CD is selected, the More like this icon is replaced by a Rip icon. Notification will be displayed when ripping of the CD is complete. 10.
L Portable media It is recommend not to use a Hard Disc Drive via the USB link while the vehicle is in motion. These devices are not designed for in-car use and may be damaged. 6. When the vehicle's discoverable name is discovered, follow the on-screen instructions. Select Yes when prompted, to confirm the pairing. On some media devices, this will complete the pairing. Alternatively, on other media devices, the vehicle's system will display a PIN (Personal Identification Number).
R Portable media Note: After the Apple device has been synced with the Media system, the device can then be controlled via the Media system or operated by the Voice system. If the Apple device's track list is updated after the device was previously synced, the device will need to be re-synced to the Media system. During this time, the Apple device's voice commands will become temporarily unavailable.
L Portable media R EF 24 ER .0 E 7. N 20 CE 15 O N LY VIDEO MEDIA PLAYER CONTROLS In the interest of safety, only operate, adjust or view the system when it is safe to do so. Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. FO R Note: The system will play MPEG1, MPEG2, WMV9, VC-1, H.264, H.263, MPEG4 ASP, RAW, VP6 and VP8 files. Note: To maximise the playback quality, it is recommended not to playback video files with a resolution greater than 1 080p.
R Portable media Touch and release to skip forward to the next video track. • Touch and hold to scan forwards through the current video track. Playback will resume when released. • Swipe the Touch screen from right, to left to skip to the next video track. 12. Select to Pause/Play: Select to pause playback. Select again to resume playback. A second touch will stop and reset the video. R EF 24 ER .0 E 7. N 20 CE 15 O 13. Skip/Scan backward: N • LY 11.
L Television R EF 24 ER .0 E 7. N 20 CE 15 O N LY TELEVISION CONTROLS In the interest of safety, only operate, adjust or view the system when it is safe to do so. Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. • 3. Find: Touch to display options for finding a TV channel/programme. • CHANNEL LIST: Touch the icon to view a list of available channels. Select the up or down arrows to scroll through the list or swipe the Touch screen up or down.
R Television To view a programme currently being broadcast, select the required programme to display a summary page. Select View Now to tune to that channel. The selected programme displays in full screen view. 13. Touch to browse to the previous TV programme. Touch the programme banner to tune to the browsed channel. For information on the use of the audio/video controls on the audio unit and steering wheel, see 107, MEDIA CONTROLS. N R EF 24 ER .0 E 7. N 20 CE 15 O 4.
L DVD player R EF 24 ER .0 E 7. N 20 CE 15 O N LY DVD PLAYER CONTROLS In the interest of safety, only operate, adjust or view the system when it is safe to do so. Sustained exposure to high sound levels (greater than 85 decibels) can damage your hearing. R 1. Rear Media: Select for rear media options. FO 2. Options: Touch to access Zoom In/Out, Audio, Angle and Subtitle options. Note: The options displayed are dependent on the inserted DVD options. 3. DVD Menu: Touch to access the DVD menu.
R DVD player FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY For information on the CD/DVD loading slot and eject button, and the use of the media controls on the Media system and steering wheel, see 107, MEDIA CONTROLS, 108, AUDIO STEERING WHEEL CONTROLS, and 109, LOADING DISCS.
L Dual view R EF 24 ER .0 E 7. N 20 CE 15 O N LY DUAL VIEW CONTROLS 1. Touch the Return icon to show media in full view screen for the passenger, and return the driver to their previous screen. 2. The information banner is momentarily displayed when Dual view is switched on. R 3. Indicates the screen being operated for the passenger. FO 4. When the vehicle is being driven, moving images will be inhibited from the driver's view and a relevant safety message will be displayed.
R Dual view FO R R EF 24 ER .0 E 7. N 20 CE 15 O Note: The Dual view controls will also be displayed on the driver’s view. N 4. If the passenger wants to take control of the Touch screen, the Dual view button should be pressed. This will take both the passenger and the driver back to the selected media source and display the Dual view controls in the footer. To return to Dual view, touch the Return icon or press the Dual view button. LY 3.
L Headphones • HEADPHONES When the battery power is low, the lamp will flash and then go out after a short delay. 5. The battery cover retaining screw. 6. The battery access cover. When the battery power is low, the headphones will emit a beeping sound every 90 seconds. LY To replace the batteries, use the following the procedure: N 1. Remove the battery access cover retaining screw (5). R EF 24 ER .0 E 7. N 20 CE 15 O 2. Pull the cover (6) away from the headphones. 3.
R Rear seat screens REAR SEAT REMOTE CONTROL R EF 24 ER .0 E 7. N 20 CE 15 O N LY DEPLOYING THE REAR SEAT SCREENS 1. Push the release latch inwards at the bottom of the screen. 2. Pull the underneath edge of the screen to deploy to the open position. When the display is fully open, the angle can be adjusted by pulling it towards the rear of the vehicle. Note: Care should be taken not to force the display beyond the fully open position.
L Rear seat screens 5. Cursor control: Up*. 6. Cursor control: Right*. REAR SEAT REMOTE CONTROL BATTERY 7. OK: Press to confirm selection. 8. Settings: Some settings for features displayed on the Rear seat screens are available, however, full functionality is controlled from the front Touch screen. 9. DVD menu. LY 10. Next track/file/channel/station. R EF 24 ER .0 E 7. N 20 CE 15 O N 11. Cabin audio volume increase/decrease/mute (volume control for the headphones is on the side of the headphones).
R Rear seat screens The rear screens allow rear seat passengers to use selected features that are also available to the front occupants. Settings: Some settings for features shown on the rear screens are available by pressing the Settings button on the remote control, however, full functionality is controlled from the front Touch screen. See106, SYSTEM SETTINGS.
L Climate and comfort R EF 24 ER .0 E 7. N 20 CE 15 O N LY FRONT CLIMATE CONTROL FO R To access the FRONT CLIMATE screen, select Climate from the HOME screen or press the Climate button. 1. Temperature control: Rotate to adjust the temperature (16°C - 28°C). The temperature is displayed on the Touch screen. On the driver's side only, HI (high) or LO (low) can be selected. 2. AUTO control: Press to switch automatic operation on. Note: AUTO mode is the recommended normal operating mode.
R Climate and comfort 5. Air Conditioning A/C: Press to switch on/ off. The A/C system can be switched on/off independently of the other Climate control functions. 15. Sync: Select to change all the front and rear passenger climate settings to match that of the driver. 16. Air distribution to the front windscreen: Touch to switch on/off. 17. External temperature display.
L Climate and comfort AUTOMATIC RECIRCULATION LY If an air quality sensor is fitted, the Climate control system will monitor exterior air pollution and humidity, and select recirculation if either reaches a predetermined level. This feature only operates when the Air purity function is active. The sensitivity of the air quality sensor can be set via the Climate Settings screen. See 138, AIR QUALITY SENSOR. The sensitivity of the Air purity can be adjusted: R EF 24 ER .0 E 7. N 20 CE 15 O 1.
R Climate and comfort R EF 24 ER .0 E 7. N 20 CE 15 O N LY REAR CLIMATE CONTROL 5. Rear panel lock: Select to disable the Rear climate control switches, in order to prevent the rear passengers from adjusting the Rear climate settings. Select again to re-enable the controls (front screen only). Alternatively, to access the CLIMATE screen from the rear screen, press the Climate button on the rear remote control. See 135, REAR SEAT SCREENS OVERVIEW 6.
L R EF 24 ER .0 E 7. N 20 CE 15 O N LY Climate and comfort The Rear climate can be set with the controls located in the rear centre console. 1. Temperature control: Rotate to adjust the temperature (16°C - 28°C). The temperature is displayed on the Touch screen (REAR CLIMATE screen). 2. AUTO control: Press to switch automatic operation on/off. 3. Blower speed: Rotate to the adjust blower speed. FO R 4. Air distribution to the face: Press to switch on/off. The switch indicator illuminates when on.
R Climate and comfort R EF 24 ER .0 E 7. N 20 CE 15 O N LY SEAT COMFORT AND ADJUSTMENT To access the SEAT COMFORT screen, select the Seats icon on the HOME screen or press the Seats button on the fascia. See 100, TOUCH SCREEN HOME MENU. FO R Rear seat passengers are able to control the seat heating or cooling temperature via the switches on the rear centre console or from the rear screens. See 17, REAR SEAT MASSAGE or 135, REAR SEAT SCREENS OVERVIEW. 1.
L Climate and comfort To access the heating controls for front and rear seats: • Press the Seats button on the fascia. • Or, select the Seats icon on the HOME screen. Or, select Seats from the EXTRA FEATURES screen. See 104, EXTRA FEATURES. Select the required front or rear seat position. Press the Power icon to switch the selected seat heating on/off. To adjust the seat heating: • Touch the red arrow to increase the heating. • Touch the blue arrow to reduce the heating.
R Climate and comfort To adjust the seat massage program: • Select the Seat massage program icon. • Select the appropriate icon for Wave, Up, Down, Shoulder or Lumbar massage. Note: Only Wave, Shoulder or Lumbar massage, is available for rear seats. To adjust the seat massage intensity: R EF 24 ER .0 E 7. N 20 CE 15 O Note: Seat massage intensity is only available for front seats. LY Touch the + or - icon to vary the intensity of the selected program.
L Climate and comfort R EF 24 ER .0 E 7. N 20 CE 15 O N LY REMOTE SEATS R The front and rear passenger seats can be controlled by the driver's seat adjustment controls. To select the remote seat controls screen, touch the Seat adjust icon to toggle between the SEAT COMFORT or SEAT ADJUST screens. See 141, SEAT COMFORT AND ADJUSTMENT. FO 1. Driver's seat adjustment controls. 5. Touch the Seat comfort icon to toggle between the SEAT ADJUST or SEAT COMFORT screens.
R Parking features R EF 24 ER .0 E 7. N 20 CE 15 O N LY USING THE PARKING AID 1. Parking Aid button. 3. 360° PDC (Park Distance Control) sensor detection zones. 9. Touch to lower the volume of the 360° PDC beeps. 4. 360° PDC (Park Distance Control) virtual detection zones. Parking Aid/360° Park Distance Control sensors may not detect moving objects, such as children and animals, until they are dangerously close. Always use extreme caution when manoeuvring. FO R 2. Parking Aid detection zones.
L Parking features Note: The sensors should be kept clean to maintain accuracy and performance. See 199, SENSORS AND CAMERAS. PARKING AID SYSTEM FAULT R EF 24 ER .0 E 7. N 20 CE 15 O Should an object not be a collision threat to the vehicle, it will be displayed as a grey block; all other collision threats are displayed in colour. If objects are detected in both the front and rear zones, an interchanging tone between the front and rear will sound.
R Parking features R EF 24 ER .0 E 7. N 20 CE 15 O N LY PARK ASSIST Park Assist sensors may not detect moving objects, such as children and animals, until they are dangerously close. Always use extreme caution when manoeuvring and always use your mirrors. Using the Parking Aid sensing technology, Park Assist is an aid to manoeuvring the vehicle in and out of parking spaces. Park Assist will take control of the vehicle's steering system to manoeuvre the vehicle.
L Parking features • A sensor is obstructed by items attached to the vehicle, e.g., bumper covers, a bicycle rack, stickers, etc. • The vehicle is being used to transport a load that extends beyond the vehicle's perimeter. Note: All of the doors and the luggage compartment lid must be securely closed when using Park Assist. USING PARK ASSIST For assistance when parking, select Parallel park, Perpendicular park or Parking exit.
R Parking features Parking exit is designed for exiting parallel spaces only. An attempt to use it in a perpendicular slot can result in a collision. Do not perform a Parking exit manoeuvre until the message Reverse With Care is displayed in the Message centre. This is also accompanied by the automated steering symbol. There is an irregular kerb alongside the parking space or the kerb is covered with leaves, snow, etc.
L Parking features • The space may not be large enough or there may not be enough space on the opposite side of the vehicle for the front to swing out during the manoeuvre. • The vehicle may have been driven too far away (more than 1.5 metres) from a row of parked vehicles. • The vehicle may have been driven too close (within 410 mm) to a row of parked vehicles. • The vehicle may have been driven in reverse.
R Parking features The system can be enabled or disabled via the Instrument panel menu. See 41, INSTRUMENT PANEL MENU. When RTD is disabled, an amber arning indicator (3) will be displayed in both exterior mirrors. N R EF 24 ER .0 E 7. N 20 CE 15 O The Reverse Traffic Detection (RTD) system will automatically disable if any of the sensors become partially or completely obscured.
L Cameras SINGLE REAR CAMERA It remains the driver's responsibility to detect obstacles and estimate the vehicle's distance from them when reversing. N The Rear camera is located on the rear bumper, as illustrated. R EF 24 ER .0 E 7. N 20 CE 15 O The camera must be kept clean and free from debris or obstructions, for example, ice, frost, snow, leaves, mud or insects. Failure to keep the camera clean may result in miscalculation or false indications. 199, SENSORS AND CAMERAS.
R Cameras 1. 360° PDC (Park Distance Control) plan view: Touch to view the full screen view of the Parking Aid feature. Some overhanging objects or barriers which could cause damage to the vehicle may not be detected by the camera. 2. Parking Aid information: Colour graphics indicate threats detected by the sensors. The camera must be kept clean and free from debris or obstructions, for example, ice, frost, snow, leaves, mud or insects.
L Cameras Note: When selected, the Surround camera system will default to a view dependent on the vehicle's speed and the selected gear. R EF 24 ER .0 E 7. N 20 CE 15 O N LY To switch on the Surround camera system, press the camera button or select Cameras from the EXTRA FEATURES screen. See 104, EXTRA FEATURES. R 1. Left or front camera split-screen image: When presented as a split image, pressing either image will switch to a full screen view of that image. FO 2.
R Cameras Camera shortcuts Press the Camera button for the following shortcut options: • Press twice to select the T Junction View. • Press a third time to return to the Rear Junction view. When in a forward gear, at speeds below 10 km/h (6 mph): LY Press once to select the Rear Junction view. • Press once to select the T Junction View. • Press twice to select the Rear Junction view. • Press a third time to return to the T Junction View.
L Phone R EF 24 ER .0 E 7. N 20 CE 15 O N LY PHONE SYSTEM OVERVIEW To access the PHONE screen, see 100, TOUCH SCREEN HOME MENU. 1. Voicemail: Touch to access the voicemail options. If no voicemail number has been set, this will take you to the keypad to enter and set the voicemail number. FO R 2. Keypad: Touch to access the keypad dialling mode. 3. Contacts: Touch to view the downloaded contacts. 4. Recents: Touch to display a list of recent dialled, received and missed calls.
R Phone Always stow your mobile phone securely. 1. Switch the ignition on and make sure that the Touch screen is active. 2. When pairing a device for the first time, select Tap to connect phone from the HOME screen. This makes the vehicle's Bluetooth system discoverable. Alternatively, to pair an additional phone, select Pair New Device. R EF 24 ER .0 E 7. N 20 CE 15 O The functioning of cardiac pacemakers or hearing aids may be impaired when the phone is in use.
L Phone MANAGING TWO CALLS PHONE SYSTEM ICONS Connect: Use to send or accept a call. Disconnect: Use to end or reject a call. Hold: Touch to hold a call; touch again to return to the call. R EF 24 ER .0 E 7. N 20 CE 15 O Two calls can be taken on the same phone. Notification will be given when a second call is received. When accepting a second call, the first call is automatically put on hold. Merge cannot be deselected. If one caller ends their call, the remaining call stays active.
R Phone STEERING WHEEL PHONE CONTROLS MICROPHONE VOLUME The microphone's volume can be adjusted. Select Phone Settings via the SETTINGS pop-up menu, followed by the Settings option for the required phone. To adjust the Microphone Volume, touch + or - to adjust to the required level. LY CONTACTS R EF 24 ER .0 E 7. N 20 CE 15 O N Contacts stored in the memory of a paired phone can be automatically downloaded to the vehicle’s Contacts list each time the phone is connected to the system.
L Phone Once the Contacts have been deleted, Auto Update Contacts will be off. This will remain off for the selected phone until reactivated. FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY Note: If Contacts are deleted, incoming calls will display the number but no name.
R Bluetooth® BLUETOOTH® INFORMATION Bluetooth® is the name for short-range Radio Frequency (RF) technology that allows electronic devices to communicate wirelessly with each other. N R EF 24 ER .0 E 7. N 20 CE 15 O Note: HFP and A2DP/AVRCP profiles can be connected independently, so a phone can be connected via one, while a media device can be connected via the other, at the same time.
L Navigation However, direction and speed sensors on the vehicle will minimise any adverse effect on the Navigation system. Normal operation will resume once the obstruction has been passed. Under certain conditions, it is possible for the vehicle's position shown on screen to be incorrect. This may happen when: R EF 24 ER .0 E 7. N 20 CE 15 O Using this combination of data sources, the vehicle's navigation computer enables you to plan and follow a route map to your desired destination.
R Navigation • If the navigation map is shown on the Touch screen: Press to view the NAVIGATION main menu. • If the navigation map is not shown on the Touch screen: Press to view the NAVIGATION map screen. 2. Touch for navigation. If no destination is currently selected: Touch to enter a destination. • If a destination is currently selected: Touch to cancel guidance. Note: A first time user should set up personal preferences in the Settings area.
L Navigation 2. Touch to scroll up or down the tile list. • My commute • Fuel search • Recent destinations • Home • Licence information. LY 3. Quick access tile options: Select the up or down arrows to scroll through the available options. Options include: R EF 24 ER .0 E 7. N 20 CE 15 O 5. Map selector: Press to select 2D, 3D or Satellite map view.
R Navigation MAIN MENU R EF 24 ER .0 E 7. N 20 CE 15 O N LY When shown, touch the Menu icon to access the NAVIGATION main menu. R Note: Some of the options listed are only available when a route has been selected. FO 1. Touch to return to the map screen. 2. Enter Address: Provides a choice of options for entering an address. See 165, ADDRESS ENTRY. 3. Edit: Touch to edit the current route. See 169, EDIT ROUTE. 4. Stop Guidance: Cancels the current route guidance, if a route is selected. 5.
L Navigation 1. From the NAVIGATION main menu (see 165, MAIN MENU), touch Enter Address. 2. Input the Country. 3. Input the City, Town or Postcode. Previous entries and narrowed search results will be displayed. Select the required entry and touch Ok. Search can be used to locate an address, or a Point Of Interest (POI). To search for an address: 1. From the NAVIGATION main menu, touch Search. 2.
R Navigation Note: The selected route must include one or more waypoints for this option to be available. • Near your destination. 3. Select a search category from the list (Petrol station, Eat & Drink, Parking Facility, ATM/Bank). R EF 24 ER .0 E 7. N 20 CE 15 O The following POI details and options may also be available: N 4. Select your search result from the list provided. LY Note: Petrol stations can be sorted by the price of their fuel, see 172, FUEL PRICES SERVICE.
L Navigation R EF 24 ER .0 E 7. N 20 CE 15 O N LY MAP SPLIT SCREEN 1. Touch to access the NAVIGATION main menu. 2. Left map view, scale/zoom setting. FO R Note: The map zoom setting can be altered by using a pinch or push motion, and the map view can be panned using a swipe motion. 3. Active route: Next direction display. 4. Selected additional view option: Route overview, Next manoeuvre, Compass or Traffic. 5. Map selector: Press to select 2D, 3D or satellite map view.
R Navigation MAP AUTO ZOOM Auto-zoom can be enable/disabled in the Navigation Settings menu, see 169, SETTINGS. SETTINGS • Auto-zoom: Enable/disable auto-zoom, see 169, MAP AUTO ZOOM. • Map features: Enable/disable from a list of available features. • Manage profile data : Clear the search history or delete all profile data. EDIT ROUTE A waypoint can be added or deleted, a route rearranged, or a round trip created for a selected route. R EF 24 ER .0 E 7.
L Navigation Satellite: Birds-eye view of the surroundings. Note: This feature requires an internet connection. Next manoeuvre: Shows a detailed view of the next junction or turn. • Route overview: View of the full route. • Traffic (where available): Possible hazards or delays. • Compass: Shows a digital compass, with your heading shown in degrees.
R Navigation For further information on Navigation system updates, please visit the Map Updates section on www.jaguar.com, or contact a Jaguar Retailer. Note: This feature does not need an internet connection to function. However, functionality may be enhanced with an internet connection. • Preferred fuel stations can be stored in the Alerts menu, see 170, ALERTS. Satellite views. See 173, SATELLITE VIEWS. Online routing. See 173, ONLINE ROUTING. • Cloud sync. See 173, PROFILES.
L Navigation The first commute must be set up manually using the My Commute set up wizard in Settings, see 169, SETTINGS. Note: Once a commute has been set up, the wizard will no longer be accessible, unless the commute is deleted. Once a commute has been set manually, the Navigation system automatically learns additional regular journeys. Note: A live internet connection is required to receive updated traffic information during the journey.
R Navigation Note: Safety camera information is not available in all countries. SATELLITE VIEWS The Navigation system uses a satellite view of the local area, overlaid with the Navigation system graphics. The Route planning web portal enables a user to search, plan routes and destinations, manage places (POIs, favourites, etc.), using a computer. Destinations, places, and routes can be synchronised with the smartphone app and vehicle's Navigation system. R EF 24 ER .0 E 7.
L Navigation Note: Internet connection to the vehicle is required to sign up for an account. FO R N R EF 24 ER .0 E 7. N 20 CE 15 O Note: If a profile is deleted, all of the profile information will be unretrievable, with the exception of Favourites, which are also stored in the cloud. LY The profile information on the Navigation system can be synchronised with the information stored on other devices via the cloud.
R Voice control R EF 24 ER .0 E 7. N 20 CE 15 O N LY USING VOICE CONTROL 1. Voice button: Press briefly to start a voice session. Press and hold to cancel a voice session. R Note: Audible feedback can be interrupted at any time by just giving the next command. A voice session will cancel if a higher priority activity or warning appears on the Touch screen, or there is no user input for a sustained length of time. FO 2.
L Voice control Alternatively, from the HOME screen, select EXTRA FEATURES followed by Voice and then Tutorial. See 176, VOICE SETTINGS. The Voice tutorial can be cancelled at any time. Cancel via the displayed pop-up, or by pressing and holding the Voice button. Alternatively, briefly press the Voice button and say Cancel. • Commands: View the categories and the example voice commands. Select the > icon to view alternative examples of saying the same command. • Voicetags: View the categories.
R Connectivity InControl Connect Pro enables connection to the internet using a high speed 3G modem. This requires a data-enabled Micro SIM card or an external Wi-Fi network (if in range of a home Wi-Fi network or a public network). The methods of connection can be made as follows: Hotspot: Creates a Wi-Fi hotspot in the vehicle to allow the connection of Wi-Fi equipped devices (tablet, laptop, smartphone) to the internet. Wi-Fi: Allows the vehicle to connect to the internet via a Hotspot.
L Connectivity Reset Connectivity The reset connectivity option is disabled until the connectivity settings are set. When selected, all content will be deleted and reset to the vehicle's default settings. CONNECTIVITY STATUS ICONS To install a Micro SIM card, insert the card with the contacts facing up and the shortest end facing out. The card should not be protruding once correctly inserted. Connecting. Make sure the SIM card is located correctly in the card holder.
R InControl Vehicle Status: Shows the status of the vehicle, current fuel level, range, odometer reading, and a vehicle locator display to help find the last parked location of the vehicle. The current security status of the vehicle and any current vehicle warnings will also be displayed. Touch the warning on the screen for further information. • Vehicle Security: Displays the open/closed status of all the doors/windows and the current alarm setting.
L InControl Jaguar SOS Emergency Call Located in the overhead console. See 280, DRIVER CONTROLS. Note: The Jaguar SOS Emergency Call feature should only be used in the event of a severe accident, or in the event that personal safety or security is at risk. INCONTROL REMOTE PREMIUM R EF 24 ER .0 E 7. N 20 CE 15 O Press and release the button cover to reveal the button. The button will be illuminated by a red LED. Press the button for 2 seconds to make a direct call to the emergency services.
R InControl Remote climate will not function if any of the following conditions exist: The vehicle's fuel level is low. • The vehicle's battery charge level is low. • The vehicle is not locked. • A window, door, bonnet, or the luggage compartment is open. • The engine has been manually started. • A system error with any required vehicle system. • A theft has been detected. • The vehicle's alarm is sounding. • A crash event has been detected. • The hazard warning lamps are switched on.
L InControl This can be done by using the InControl Remote Smartphone App, or via the InControl website. This will prevent automatic theft alerts being raised while the vehicle is being serviced. The availability of LIVE services and features may vary by market. Selected LIVE services and features require an InControl Account, which can be created by visiting www.jaguar.com. Note: For further information, visit the InControl section of the www.jaguar.com website.
R InControl Once connected, any available apps will appear on the vehicle’s Touch screen. You can now open and operate those apps using the Touch screen in the same way as your smartphone. Note: Smartphone Apps is not suitable for use while driving, for example, gaming apps will not appear on the Touch screen while the vehicle is moving. N FO R R EF 24 ER .0 E 7. N 20 CE 15 O Note: Apple and iPhone are registered trademarks of Apple Inc., registered in the U.S. and other countries.
L Fuel and refuelling Avoid exposing the fuel gases to any potential sources of ignition as the resulting fire and explosion may cause serious injuries and/or death. Switch off the engine when refuelling. Use high quality fuel that meets the specification defined by EN228 (or the national equivalent).
R Fuel and refuelling Wherever possible, avoid using fuels containing methanol. Use of fuels containing methanol may cause serious engine and fuel system damage, which may not be covered under warranty. METHYL TERTIARY BUTYL ETHER (MTBE) If you inadvertently fill your vehicle with petrol instead of diesel, do not attempt to start the engine. Contact a Retailer/ Authorised Repairer immediately.
L Fuel and refuelling Note: It is a legal requirement that the DEF system is used correctly, as detailed in this handbook. It may be a criminal offence to run the vehicle when it is not consuming the correct specification of DEF. DEF can smell unpleasant and stain clothing or upholstery. Take care not to spill the fluid when performing a top-up procedure. In the event of spillage, rinse immediately with clean water.
R Fuel and refuelling This feature prevents the fuel system from running dry, which could cause damage to the vehicle. If the fuel gauge indicates a low fuel level, or the low fuel warning lamp illuminates (see 46, LOW FUEL WARNING (AMBER)), the fuel tank should be refuelled as soon as possible at the next filling station with at least 4 litres of fuel. R EF 24 ER .0 E 7. N 20 CE 15 O Note: When starting and stopping the engine, you may hear the DEF pumps initiating and shutting down.
L Fuel and refuelling FUEL FILLER FLAP Take note of all warnings and instruction given on the label affixed to the inside of the fuel filler flap. Note: The filler flap will only be locked closed when the vehicle is centrally locked. FUEL FILLER When refuelling ensure that all windows, doors, and sunroof are fully closed, particularly if young children or animals are in the vehicle. R EF 24 ER .0 E 7. N 20 CE 15 O N LY Do not attempt to fill the tank to its maximum capacity.
R Fuel and refuelling Note: The filler spout on some fuel cans and older fuel pumps may trigger the misfuelling device. 3. With the top of the tool pressed down and the teeth engaged, slowly pull the tool out of the filler neck to reset the device. Do not twist the device, once the teeth have engaged. Note: When reset, the yellow part of the protection device should no longer be visible in the filler neck. R EF 24 ER .0 E 7.
L Fuel and refuelling FUEL CONSUMPTION The fuel consumption figures shown in the following table, have been calculated using a standard testing procedure (the new EC test procedure from Directive 99/100/EC), and produced in accordance with The Passenger Car Fuel Consumption (Amendment) Order 1996. Extra-urban l/100 km (mpg) Combined l/100 km (mpg) 7.0 (40.4) 5.2 (54.3) 5.7 (49.6) 149 7.1 (39.8) 5.2 (54.3) 5.9 (48.0) 155 7.5 (37.7) 5.3 (53.3) 6.1 (46.3) 159 13.0 (21.7) 6.7 (42.2) 9.0 (31.
R Fuel and refuelling Variant Urban l/100 km (mpg) Extra-urban l/100 km (mpg) Combined l/100 km (mpg) CO2 emissions Standard wheelbase 12.5 (22.6) 7.1 (39.8) 9.1 (31.0) 211 Long wheelbase 12.5 (22.6) 7.1 (39.8) 9.1 (31.0) 211 10.5 (26.9) 250 10.5 (26.9) 250 g/km 7.8 (36.2) Long wheelbase 15.2 (18.6) 7.8 (36.2) N 15.2 (18.6) R EF 24 ER .0 E 7. N 20 CE 15 O Standard wheelbase LY 3.0L Petrol - Supercharged - All wheel drive 3.
L Fuel and refuelling URBAN CYCLE The urban test cycle is carried out from a cold start and consists of a series of accelerations, decelerations and periods of steady speed driving and engine idling. The maximum speed attained during the test is 50 km/h (30 mph) with an average speed of 19 km/h (12 mph). COMBINED The combined figure is an average of the urban and extra-urban test cycle results, which has been weighted to take account of the different distances covered during the two tests.
R Maintenance RUNNING-IN PARTS AND ACCESSORIES Do not fit non-approved parts and accessories or carry out non-approved alterations or conversions. This vehicle is built using high-precision manufacturing methods, but the moving parts of the engine must still bed-in relative to one another. The process occurs mainly in the first 3 000 km (2 000 miles) of operation. Your vehicle is not designed for use with a roof rack. Do not fit a roof rack to the vehicle, as damage may result.
L Maintenance In addition to the routine services and inspections, a number of simple checks must be carried out more frequently. These checks can be carried out by the owner and advice is given on the pages that follow. DAILY CHECKS Operation of lamps, horn, direction indicators, wipers, washers and warning indicators. • Operation of seat belts and brakes. • Look for fluid deposits underneath the vehicle that might indicate a leak. Condensation drips from the air conditioning are normal.
R Maintenance SAFETY IN THE GARAGE Prolonged contact with engine oil may cause serious skin disorders, including dermatitis and cancer of the skin. Always wash thoroughly after contact. OPENING THE BONNET Do not attempt to open the bonnet if the pedestrian protection system has deployed. R EF 24 ER .0 E 7. N 20 CE 15 O If the vehicle has been driven recently, do not touch exhaust and cooling system components until the engine has cooled.
L Maintenance 1. Lower the bonnet until the safety catch engages. Using both hands, press the bonnet down until the catches click. 2. Check that both catches are fully engaged by attempting to lift both sides of the front edge of the bonnet. This should be free from all movement. 2. Push the cover down firmly, insert and fasten the turnbuckle clips. UNBLOCKING WASHER JETS Do not operate the washer jets during adjustment. Windscreen washer fluid may cause irritation to the eyes and skin.
R Maintenance HIGH LEVEL BRAKE LAMP REPLACEMENT Once the power supply is restored, reset the sunroof as follows: 1. Switch the ignition on. 2. Fully close the sunroof. 3. Press the front of the sunroof switch, and hold for 45 seconds. 4. After 45 seconds the sunroof will begin to move. Keep the front of the switch pressed until the sunroof and the roof blinds have fully opened, then closed. R EF 24 ER .0 E 7. N 20 CE 15 O Removal of this lamp unit should only be attempted by a qualified technician.
L Maintenance Note: It is advisable to have the engine running while resetting the windows, to make sure that a minimum of 12 volts is available at all times. FIRE EXTINGUISHER Note: Make sure that the One-touch window operation is functional, (see 61, ONE-TOUCH WINDOW OPERATION) and the window is fully closed. It is also the responsibility of the owner to make sure the pressure is at a suitable operating pressure as indicated on the pressure gauge. Use only Jaguar approved fire extinguishers.
R Vehicle cleaning THE EXTERIOR To prevent damage to your vehicle when using a valeting service, make sure to advise them of the cleaning instructions contained within the Owner's handbook. Never use cleaning products which are not approved for use on vehicles. Substances which are corrosive, such as bird droppings, can damage the vehicle's paintwork and should be removed as soon as possible.
L Vehicle cleaning To avoid damaging the protecting coating, only clean the interior side of the sunroof glass with a soft cloth. Do not scrape the glass or use abrasive cleaning fluids. THE INTERIOR To prevent damage to your vehicle when using a valeting service, make sure to advise them of the cleaning instructions contained within the Owner's handbook.
R Vehicle cleaning Use Jaguar approved Leather Cleaner for heavily soiled areas. Dry off and rub with a clean soft cloth, changing surfaces regularly. Do not use solvents. Do not use detergents, furniture polish or household cleaners. While these products may initially give impressive results, their use will lead to rapid deterioration of the leather and will invalidate the warranty. Jaguar recommend a basic set of products that have been specially selected for the type of leather in your vehicle.
L Vehicle cleaning WIPER BLADES Do not use excessive pressure. Heavy contamination on the wiper blades should be removed using a soft, damp sponge or cloth. CARPETS AND MATS SEAT BELTS Do not allow any water, cleaning products or fabric from cloths to enter the seat belt mechanism. Any substance which enters the mechanism may affect the performance of the seat belt in an impact. Extend the seat belts fully, then use warm water and a non-detergent soap to clean.
R Fluid level checks FLUID FILLER LOCATIONS 1. Washer fluid. R EF 24 ER .0 E 7. N 20 CE 15 O N LY 2.0 litre petrol engine 2. Brake fluid (right-hand drive vehicles). 3. Engine oil. 4. Brake fluid (left-hand drive vehicles). R 5. Coolant. FO 6. Power steering. 7. Engine oil dipstick. Do not drive the vehicle if there is a possibility that leaked fluid will come into contact with a hot surface, such as the exhaust.
L Fluid level checks 1. Washer fluid. R EF 24 ER .0 E 7. N 20 CE 15 O N LY 3.0 and 5.0 litre petrol engines R 2. Brake fluid (right-hand drive vehicles). FO 3. Engine oil (3.0L engine). 4. Engine oil (5.0L engine). 5. Brake fluid (left-hand drive vehicles). 6. Coolant (3.0L engine). 7. Power steering (5.0L engine). 8. Power steering (3.0L engine). 9. Coolant (5.0L engine).
R Fluid level checks R EF 24 ER .0 E 7. N 20 CE 15 O N LY Diesel engine FO R 7. Diesel Exhaust Fluid (DEF) reservoir filler cap. The DEF reservoir filler cap is located beneath the spare wheel and tool kit. See 238, WHEEL CHANGING. Note: When removing the DEF reservoir filler cap, a socket drive can be used for added leverage, if it is too tight. Hand tighten only, when refitting.
L Fluid level checks Prior to checking the oil level make sure that the vehicle is on level ground. All except 2.0 litre petrol engine The engine oil has reached working temperature (oil is hot). • The engine has been switched off for 10 minutes, as the system will not give an accurate reading until the oil level has stabilised. The oil level can then be checked as follows: 1. Switch on the ignition (do not start the engine). 2. Make sure that Park (P) is selected. FO R 3.
R Fluid level checks 1. Withdraw the dipstick and wipe the blade clean with a lint free cloth. All except 2.0 litre petrol engine 2. Fully re-insert the dipstick and withdraw again to check the oil level. Never allow the oil level to fall below the lower mark (MIN) on the dipstick. As a general guide, if the level on the dipstick: 2. Add oil as indicated by the Message centre display. Is nearer to the lower mark than the upper, add 0.5 litre (1 pint) of oil. • Is below the lower mark, add 0.
L Fluid level checks Make sure the coolant level is maintained between the level indicator marks, as shown in the illustration. Petrol engines When travelling in territories where the water supply contains salt, always make sure you carry a supply of fresh (rain or distilled) water. Topping up with salt water will cause serious engine damage. Top-up to the upper level indicator mark located on the side of the expansion tank. For the coolant fluid specification, see 245, LUBRICANTS AND FLUIDS.
R Fluid level checks Brake fluid is highly inflammable. Do not allow brake fluid to come into contact with naked flames or other sources of ignition (e.g. a hot engine). Only use new fluid from an airtight container (fluid from open containers or fluid previously bled from the system, will have absorbed moisture, which will adversely affect performance, and must not be used). 1. Clean the filler cap with a dry, clean cloth before removing.
L Fluid level checks Seek qualified assistance immediately if there is a noticeable drop in the fluid level. 3. Top-up the reservoir until the fluid level is between the MIN and MAX marks. For the power steering fluid specification, see 245, LUBRICANTS AND FLUIDS. 4. Replace the filler cap. CHECKING THE WASHER FLUID LEVEL Some screen washer products are flammable, do not allow screen washer fluid to come into contact with naked flames or sources of ignition. R EF 24 ER .0 E 7.
R Fluid level checks TOPPING UP THE WASHER FLUID 1. Clean the filler cap before opening to prevent dirt from entering the reservoir. 2. Open the filler cap. 3. Top-up the reservoir with the specified washer fluid until the fluid is visible in the filler neck, see 245, LUBRICANTS AND FLUIDS. FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY 4. Close the filler cap.
L Vehicle battery Make sure that when working near or handling the battery, suitable eye protection is worn, to protect the eyes from acid splashes. Be aware that the battery may emit explosive gases. The battery contains acid which is extremely corrosive and toxic. Consult the handbook for information, before handling the battery.
R Vehicle battery • Do not connect a jump lead to the negative (-) terminal of the battery. Always connect to the recommended earthing point. Make sure the bodywork of the donor and disabled vehicles do not touch. Make sure both batteries are of the 12 volt type and that the jump leads have insulated clamps and are approved for use with 12 volt batteries. Energy Management: Will be displayed on the Touch screen if the engine is not running, and system features are causing excessive battery discharge.
L Vehicle battery 3. Connect the negative jump lead (Black) to the recommended jump starting earth point of the donor vehicle. 4. Connect the other end of the negative jump lead to the negative post (C). Check that all cables are clear of any moving components and that all 4 connections are secure. LY 5. Start the engine of the donor vehicle, and allow it to idle for a few minutes. N 6. Start the engine of the disabled vehicle. R EF 24 ER .0 E 7.
R Vehicle battery To start the vehicle using a starting aid or a slave battery, follow the instructions in the sequence given: 1. Connect the positive (Red) cable to the positive terminal (in the engine compartment) of the disabled vehicle. 2. Connect the negative (Black) cable to the negative terminal (in the engine compartment) of the disabled vehicle. LY 3. Connect/switch on the starting aid. R EF 24 ER .0 E 7. N 20 CE 15 O 5. Disconnect/switch off the starting aid. N 4.
L Fuses R EF 24 ER .0 E 7. N 20 CE 15 O N LY FUSE BOX LOCATIONS R When a fuse box lid is removed, take care to protect the box from moisture, and refit the lid at the earliest opportunity. To access the fuse box, raise the luggage compartment floor trim. CHANGING A FUSE Always switch off the ignition system and the affected electrical circuit, before replacing a fuse. 1. Engine compartment fuse box.
R Fuses FO R R EF 24 ER .0 E 7. N 20 CE 15 O N LY Spare fuses are located in the tool tray situated under the floor in the luggage compartment.
L Fuses ENGINE COMPARTMENT FUSE BOX Fuse No Rating (amps) Fuse Colour Circuit F1 - - - F2 10A Red Engine management sensors (petrol & GTDI). 5A Tan Engine and E-box cooling fans. 25A Clear Ignition coils (petrol & GTDI). F3 Tan Valve control (diesel). 30A Green Power wash pump. F5 40A Orange Main electrical power to module (petrol). 20A Yellow ECM (GTDI). 5A Tan Diesel Exhaust Fluid (DEF) (diesel). F6 40A Orange Right-side front screen heater and heated wiper.
R Fuses Fuse Colour Circuit F18 15A Blue Horn. F19 30A Green Starter. F20 40A Orange Anti-lock Brake System (ABS) pumps. F21 25A Clear ABS valve. F22 15A Blue Left-side LED headlamps. F23 15A Blue Right-side LED headlamps. F24 - - - F25 15A Blue Intercooler water pump - EWP (petrol). F26 40A F27 5A F28 15A F29 - F30 - F31 - F32 40A F33 - F34 - F35 80A R EF 24 ER .0 E 7. N 20 CE 15 O N LY Fuse No Rating (amps) Wiper motor. Tan Monitor.
L Fuses PASSENGER COMPARTMENT FUSE BOX Fuse Colour Circuit F1 5A Tan RF-RX, IMS, Tyre Pressure Monitoring System (TPMS). F2 - - - F3 - - - F4 5A Tan CAN Gateway module. F5 5A Tan Dynamic Stability Control (DSC) module, Yaw rate, Steering angle sensor. F6 5A Tan Fuse box engine compartment. F7 20A Yellow Rear climate control. F8 30A Green Front passenger's seat adjustment. F9 5A Tan Electric Parking Brake (EPB). F10 5A Tan Air suspension control module.
R Fuses Fuse Colour Circuit F27 - - - F28 20A Yellow Rear seat dual climate control module. F29 20A Yellow Front seat dual climate control module. F30 25A Clear Passenger door module. F31 5A Tan Rain/light sensor. F32 25A Clear Driver’s door module. F33 20A Yellow Front dual climate control module. F34 10A Red Fuel filler flap lock. F35 - F36 5A F37 20A F38 15A F39 25A F40 5A F41 - F42 30A R EF 24 ER .0 E 7.
L Fuses Fuse Colour Circuit F55 20A Yellow Rear accessory socket. F56 10A Red Restraint control module, Occupancy sensor. F57 10A Red Glovebox, glovebox lamp, front and rear overhead consoles, sun visor lamps, vanity lamps. F58 30A Green Right-side rear seat module. F59 - - - F60 - - - F61 10A Red Integrated antenna unit, cluster, cluster fan. F62 10A Red Climate control module. F63 20A Yellow Front accessory socket. F64 15A Blue Left-side rear sun blind.
R Fuses LUGGAGE COMPARTMENT FUSE BOX Fuse Colour Circuit F1 30A Green Right-side Electric Parking Brake (EPB). F2 - - - F3 - - - F4 5A Tan Singapore road pricing. - - Green Power boot lid. F7 - - - F8 5A F9 - F10 - F11 20A F12 10A F13 10A F14 20A F15 - F16 10A F17 10A F18 10A R FO N 30A R EF 24 ER .0 E 7. N 20 CE 15 O F5 F6 LY Fuse No Rating (amps) Tan Telematics. - - - - Yellow Front heated seat. Red Seat movement logic and switch power.
L Fuse Colour Circuit F28 - - - F29 - - - 2A Grey VICS. 40A Green Diesel Exhaust Fluid (DEF). F32 30A Green Left-side EPB. F33* 40A Green E-diff module. F34* 40A Green Front blower motor. F35* 60A Yellow Quiescent relay box. F36* 40A Green Sunroof module. F37* 60A Yellow Air suspension. F38* 40A Green Power amp. F39 - - - R EF 24 ER .0 E 7.
R Fuses Fuse No Rating (amps) Fuse Colour Circuit F12 - - - F13 - - - - - - 15A Blue Heating and ventilation module. F16 - - - FO R R EF 24 ER .0 E 7.
L Tyres R EF 24 ER .0 E 7. N 20 CE 15 O N LY TYRE MARKINGS 1. P indicates that the tyre is for passenger vehicle use. This index is not always shown. R 2. The width of the tyre from sidewall edge to sidewall edge in millimeters. FO 3. The aspect ratio, also known as the profile, gives the sidewall height as a percentage of the tread width. So, if the tread width is 205 mm and the aspect ratio is 50, the sidewall height will be 102 mm. 4. R indicates that the tyre is of Radial ply construction. 5.
R Tyres 13. The maximum load which can be carried by the tyre. 14. Heat resistance grading. The tyres resistance to heat is grade A, B or C, with A indicating the greatest resistance to heat. This grading is provided for a correctly inflated tyre, which is being used within its speed and loading limits. 15. The maximum inflation pressure for the tyre. 229, AVOIDING FLAT SPOTS. R Speed km/h (mph) FO Q Avoid spinning the wheels.
L Tyres The following procedure should be used to check and adjust the tyres pressures. R EF 24 ER .0 E 7. N 20 CE 15 O If the vehicle has been parked in strong sunlight, or used in high ambient temperatures, do not reduce the tyre pressures. Move the vehicle into the shade and allow the tyres to cool before re-checking the pressures. If it is necessary to check tyre pressures when the tyres are warm, you should expect the pressures to have increased by up to 0.3 - 0.4 bar (4 - 6 psi, 30 - 40 kpa).
R Tyres TYRE VALVES TYRE DEGRADATION Keep the valve caps screwed down firmly to prevent water or dirt entering the valve. Check the valves for leaks when checking the tyre pressures. Tyres degrade over time due to the effects of ultraviolet light, extreme temperatures, high loads, and environmental conditions. It is recommended that tyres are replaced at least every six years, but they may require replacement more frequently.
L Tyres Only Jaguar approved traction devices should be used on the vehicle. Only Jaguar approved traction devices have been tested to make sure that they do not cause damage to the vehicle. Contact a Jaguar Retailer/ Authorised Repairer for information. • The wheels and tyres fitted must conform to the specifications of the original equipment. • Single sided traction devices or snow chains can be fitted to the rear wheels. They should not be used on temporary spare wheels.
R Tyre pressure monitoring system (TPMS) TYRE PRESSURE MONITORING SYSTEM (TPMS) TPMS provides a low pressure warning and does not re-inflate your tyres. Tyre pressures should be checked regularly using an accurate pressure gauge when the tyres are cold. N R EF 24 ER .0 E 7. N 20 CE 15 O When inflating tyres, care should be taken to avoid bending or damaging the TPMS valves. Always make sure of correct alignment of the inflation head to the valve stem. LY TPMS can NOT register damage to a tyre.
L Tyre pressure monitoring system (TPMS) When selected, the last known tyre pressures will be displayed, alongside the recommended cold tyre pressures (in brackets). Note: If in use, always replace the temporary spare wheel before having a TPMS fault investigated. Note: If any of the wheels or tyres have been removed, the displayed tyre pressures may not be valid. Drive the vehicle for at least 15 minutes in order to re-calibrate the system. N R EF 24 ER .0 E 7.
R Tyre repair kit TYRE REPAIR KIT If you are in any doubt regarding your ability to carry out the instructions, contact your Retailer/Authorised Repairer before attempting the repair. Only use the tyre repair kit to seal damage located within the tyre tread area (A). Do not use the tyre repair kit to seal damage to the tyre sidewall. Your vehicle may not be equipped with a spare tyre, in its place you will find a tyre repair kit.
L Tyre repair kit Do not attempt to remove foreign objects such as nails, screws, etc. from the tyre. 2. Uncoil the compressor power cable and the inflation hose. R EF 24 ER .0 E 7. N 20 CE 15 O Always run the engine when using the compressor, unless the vehicle is in an enclosed or poorly ventilated space, as this may cause asphyxiation. 1. Open the tyre repair kit and peel off the maximum speed label. Attach the label to the fascia in the driver's field of vision.
R Tyre repair kit Note: It should not take longer than 10 minutes to inflate the tyre. If, after 10 minutes, the tyre has not yet reached minimum pressure, the tyre should not be used. R EF 24 ER .0 E 7. N 20 CE 15 O 11. Once the tyre has been inflated to the required pressure, switch off the compressor. If desired, the ignition may be switched off after the compressor has been switched off. When driving the vehicle, if you experience vibrations, abnormal steering, or noises, reduce speed immediately.
L Tyre repair kit 8. To check the tyre pressure, switch off the compressor then read the pressure from the gauge. 9. When the compressor is off, if the tyre pressure is too high, release the required amount of pressure using the pressure release valve. N R EF 24 ER .0 E 7. N 20 CE 15 O Note: The use of the tyre repair kit sealant may lead to error prompts and incorrect readings of the Tyre Pressure Monitoring System (TPMS).
R Wheel changing Always find a safe place to stop, off the highway and away from traffic. Make sure that the vehicle and jack are both on firm level ground. Apply the parking brake, and engage Park (P). Switch on the hazard warning lamps. Remove the spare wheel prior to jacking the vehicle, to avoid destabilising the vehicle when raised. Take care when lifting the spare wheel, and removing the punctured wheel. The wheels are heavy, and can cause injuries if not handled correctly. R EF 24 ER .0 E 7.
L Wheel changing R EF 24 ER .0 E 7. N 20 CE 15 O N LY WHEEL CHANGING There are four jacking points on the underside of the floor. Two indented, triangular indicators are provided on each sill cover. These indicate the location for the jack. 1. Jack: Observe the instructions printed on the jack. 2. Wheel brace. FO 4. Towing eye. R 3. Locking wheel nut adaptor. 5. Wheel chock. To remove the spare wheel, unscrew and remove the bolt through the centre.
R Wheel changing Lower the jack, then tighten the wheel nuts fully, in the same sequence shown. Do not overtighten by using foot pressure or extension bars on the wheel nut wrench. At the earliest opportunity have the wheel nuts tightened with a torque wrench to 125 Nm (92 lb.ft). Do not fit more than one temporary spare wheel to the vehicle at any one time. Do not exceed 80 km/h (50 mph) while the temporary spare wheel is fitted.
L Vehicle recovery TOWING EYES The towing eye at the front of the vehicle is designed for on-road recovery only. Do not tow the vehicle on all four wheels. The recommended method for recovery/ transportation of the vehicle, is on a transporter or trailer designed for that purpose. Make sure that transportation is carried out by suitably qualified persons, and that the vehicle is secured correctly. ATTACHING THE FRONT TOWING EYE FO R R EF 24 ER .0 E 7.
R After a collision PEDESTRIAN PROTECTION SYSTEM The bumper includes sensors that detect a collision with a pedestrian and includes energy absorbing foam and plastics in its construction, to reduce leg injuries. If any significant damage occurs to the front bumper it should be inspected by a Retailer/ Authorised Repairer as soon as possible. R EF 24 ER .0 E 7.
L How various systems in your vehicle were operating; • Whether or not the driver and passenger seat belts were buckled/fastened; • How far (if at all) the driver was pressing the accelerator and/or brake pedal; and, • How fast the vehicle was travelling. R EF 24 ER .0 E 7. N 20 CE 15 O Note: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g.
R Vehicle labels Labels showing this symbol indicate that the ignition system utilises very high voltages. Do not touch any ignition components while the starter switch is turned on. Note: If you need to communicate with a Retailer/Authorised Repairer, you may be asked to quote the VIN number. 4. Airbag label - Sun visor. 5. Vehicle Identification plate, including the Vehicle Identification Number (VIN) and recommended maximum vehicle weights Located on the left-side B pillar.
L Technical specifications ENGINE SPECIFICATIONS Displacement (cc) Compression ratio 2.0L Petrol 4 1 999 10:1 3.0L Petrol (SC) 6 2 995 10.5:1 5.0L Petrol (SC) 8 5 000 9.5:1 3.0L Diesel 6 2 993 16.1:1 LY Number of cylinders FO R R EF 24 ER .0 E 7. N 20 CE 15 O N SC - Supercharged.
R Technical specifications LUBRICANTS AND FLUIDS Part Engine variant Specification Engine oil 2.0L Petrol SAE 5W-30 engine oil meeting Jaguar Land Rover specification STJLR.03.5003. 3.0L (SC) Petrol SAE 0W-20 engine oil meeting Jaguar Land Rover specification STJLR.51.5122. LY 5.0L (SC) Petrol SAE 0W-20 engine oil meeting Jaguar Land Rover specification STJLR.51.5122. R EF 24 ER .0 E 7. N 20 CE 15 O N 3.
L Technical specifications WEIGHTS Variant Vehicle weight from kg Gross Vehicle Weight (GVW)¹ kg Maximum front axle load² kg Maximum rear axle load² kg Standard wheelbase 3.0L Diesel 1 835 2 400 1 180 1 280 2.0L Petrol 2 280 1 080 1 280 2 350 1 130 1 320 3.0L Petrol (SC) 1 865 AWD 2 430 1 180 5.0L Petrol (SC) 1 875 2 400 1 180 N 1 320 R EF 24 ER .0 E 7. N 20 CE 15 O Long wheelbase LY 1 735 3.0L Petrol (SC) 1 765 1 320 3.0L Diesel 1 860 2 450 1 180 1 320 2.
R Technical specifications R EF 24 ER .0 E 7.
L Technical specifications Description Measurement (mm) 8 Maximum wading depth* 300 - Turning circle (kerb to kerb) Long wheelbase 12.3 metres Long wheelbase (AWD) 12.3 metres Standard wheelbase 11.9 metres Standard wheelbase (AWD) 11.9 metres LY Item FO R R EF 24 ER .0 E 7. N 20 CE 15 O N *Maximum wading speed is 7 km/h (4 mph).
R Technical specifications CAPACITIES Variant Capacity Fuel tank (usable) Diesel 77 litres Petrol 80 litres Fuel tank reserve (when the fuel gauge indicates empty) Diesel 4 litres Petrol 4 litres Engine oil refill and filter change 3.0L Diesel 6.6 litres LY Item 3.0L (SC) Petrol R EF 24 ER .0 E 7. N 20 CE 15 O 3.0L (SC) Petrol AWD 5.4 litres N 2.0L Petrol 7.25 litres 6.5 litres 5.0L (SC) Petrol 7.
L Technical specifications 1. Cabin transmitters. R EF 24 ER .0 E 7. N 20 CE 15 O N LY SMART KEY TRANSMITTER LOCATIONS 2. Door handle transmitters. 3. Luggage compartment interior transmitters. R 4. Luggage compartment exterior transmitter. FO Any person fitted with an implanted medical device should ensure that the device is kept at a distance of at least 22 cm (8.7 inches) away from any transmitter mounted in the vehicle.
R Technical specifications RADIO FREQUENCY SPECTRUM REGULATION STATEMENTS Frequency band Max. Output Antenna position 4m VHF 70 - 85 MHz 30 W/CW 40 W/AM Anywhere on the Transmitter, harness and metallic part of the roof. antenna installation to the requirements of ISO/TS 21609. 2m VHF 142 - 175 MHz 30 W/CW 40 W/AM Anywhere on the Transmitter, harness and metallic part of the roof. antenna installation to the requirements of ISO/TS 21609.
L Type approval FO R R EF 24 ER .0 E 7.
N R EF 24 ER .0 E 7.
N R EF 24 ER .0 E 7.
N R EF 24 ER .0 E 7.
N R EF 24 ER .0 E 7.
N R EF 24 ER .0 E 7.
N R EF 24 ER .0 E 7.
N R EF 24 ER .0 E 7.
L Index FO R LY R EF 24 ER .0 E 7. N 20 CE 15 O About this handbook......................................2 Accessories................................................193 Active differential control.............................76 Adaptive cruise control................................83 ACC gap change.......................................84 automatic switch-off................................85 driving hints.............................................86 follow mode.....................................
R Index FO R R EF 24 ER .0 E 7. N 20 CE 15 O Battery boost starting.........................................214 care........................................................212 charging.................................................215 connecting jump leads...........................213 disconnecting jump leads.......................214 luggage compartment access with a discharged battery....................................68 maintenance...........................................212 replacing..........
L Index N LY removing tar...........................................200 seat belts................................................202 sensors and cameras.............................199 sunroof...................................................200 using a car-wash....................................199 washer jets.............................................196 wipers....................................................202 Cleaning the wiper blades..........................
R Index FO R R EF 24 ER .0 E 7. N 20 CE 15 O DAB radio settings..................................................117 DAB radio controls.....................................116 Data recording...........................................241 Daytime running lamps................................49 Declarations of conformity.........................252 DEF............................................................185 Detection beam issues.................................86 Diesel filler flap..................
L Index N LY Electronic data...........................................241 Emergency brake assist.........................79, 88 Emergency call InControl link..........................................179 Emergency key locking................................12 Emergency release luggage compartment..............................67 Engine antifreeze level........................................207 compartment opening............................195 coolant level...........................................
R Index oil N LY top up.................................................207 power steering check..................................................209 specification.......................................210 top up.................................................210 specifications.........................................245 washer fluid............................................211 check..................................................210 specification.......................................
L Index G FO R Garage door opener.....................................58 assistance................................................59 erase all programming.............................59 programming...........................................58 programming a single button...................59 Garage door transceiver...............................58 Gearbox automatic.................................................74 gear shift warning lamp............................47 identification number..............
R Index N LY fuel range.................................................42 lamp test..................................................44 menu........................................................41 driving features....................................41 instrument display................................41 trip computer........................................41 vehicle set-up.......................................41 recommended tyre pressures.................232 service indicator.........................
L Index M LY Maintenance arduous driving conditions.....................195 brake fluid level......................................208 bulb changing........................................196 rear lamp removal..............................197 capacities...............................................249 changing a fuse......................................216 checking tyre pressure after a repair......235 cleaning alloy wheels........................................199 exterior............................
R Index Mpg...........................................................190 N N LY Navigation address entry.........................................165 alerts......................................................170 approach mode......................................172 connected navigation.............................171 door to door routing...............................173 edit route................................................169 from the rear seats.................................168 fuel finder.
L Index P FO R Paddle shift..................................................75 Paintwork cleaning..................................................199 repair......................................................199 Pairing via the phone..........................................157 Park assist cleaning sensors and cameras...............199 limitations..............................................149 options...................................................147 selecting..................................
R Index N LY Rear screen cleaning..................................200 Rear seat entertainment deploying the screens............................133 headphones............................................132 home screen..........................................135 remote control........................................133 remote control batteries.........................134 Rear seats executive class.........................................16 massage seats......................................
L Index S FO R Safety child safety locks......................................28 cleaning seat belts..................................202 fuel and refuelling...................................184 seat belt checks........................................26 seat belt pre-tensioners............................25 seat belt reminder warning.......................26 seat belts..................................................25 seat belts warning lamp...........................45 seats for larger children.....
R Index N LY closing mislock........................................10 deactivating the alarm..............................11 lock confirmation.......................................9 locking with the emergency key...............12 perimeter alarm........................................11 single locking.............................................9 Security sensors fault..........................................................12 Sensors blockage...................................................
L Index N LY Steering wheel controls speed limiter............................................81 Stolen vehicle InControl secure.....................................181 Stop/start activating..................................................72 deactivating........................................72–73 Storage compartments................................63 cup holders..............................................63 front cubby box........................................63 rear armrest.......................
R Index N LY portable media playing...........................121 rear media control..................................108 rear seat screen seat comfort.........................................17 remote seats..........................................144 seat comfort and adjustment....................15 seat settings...........................................144 status icons............................................101 surround cameras..................................153 system settings.................
L Index N LY entry and exit mode..................................22 global opening........................................4, 6 keyless entry..............................................6 luggage compartment emergency release......................................................67 mode..........................................................4 multi point entry.........................................4 passive entry..............................................6 single point entry.......................
R Index W R Warning lamps.............................................44 ABS..........................................................45 ACC follow mode......................................46 adaptive front lighting system (AFS)........45 airbags...............................................38, 46 audible warnings and indicators...............48 automatic speed limiter............................46 battery charge..........................................45 brake.........................................
L FO R N R EF 24 ER .0 E 7. N 20 CE 15 O checking the pressures after a repair.....235 flat spots................................................229 Indian regulations..................................230 pressures...............................................227 puncture repair.......................................233 puncture repair safety............................233 repair kit.................................................233 repair kit use..........................................
N R EF 24 ER .0 E 7.
L Controls overview DRIVER CONTROLS 32. Surround camera system (153). Note: Information in brackets refers to the page where additional information can be found. 33. Touch screen HOME menu (100). 34. Touch screen on/off (100) or Park assist on/off (148). 2. Sunroof (60). 35. CD/DVD eject (107). 3. Rear screen sun blind (60). 36. Audio on/off and volume (107). 4. Rear sunroof blind (60). 37. Instrument menu controls (41). 5. InControl Protect- SOS Emergeny call (179). 38.
R EF 24 ER .0 E 7.