Specification Sheet
Letter Description Dimension
A Length 7.375”
B Width 31.625”
C Cutout Diameter 1.56”
D Cutout Opening 0.5”
E Length (Grip Tape) 7”
F Width (Grip Tape) 1.5”
G Grip Tape Spacing 0.25”
H Thickness 0.5”
Bath Caddy Tray
KEY DIMENSIONS* [NOTE: The overall dimensions are nominal with a tolerance of +0 and -.25” (6mm).]
Technical Specications
©2019 Jacuzzi Luxury Bath • For additional information, call Customer Service 800-288-4002 • www.jacuzzi.com/baths
Refer to installation instructions included with xture before beginning installation. Please conrm product availability and specications before
commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE
QC60000
BATH CADDY TRAY FITMENT GUIDE
To determine if the Bath Caddy Tray will be compatible with
your bathtub you will need to determine the inner width of the
deck of your bathtub. Ensure that the inner width of the deck
of your bathtub is within the range of the non-slip grip tape,
28.125”-31.125”
If the location of the non-slip grip tape on the Bath Caddy Tray
does not allow for placement on your bathtub it is possible to
relocate the non-slip grip tape. Remove the non-slip grip tape
by slowly peeling it off, starting at the short end. Replace the
non-slip grip tape in the desired location by rmly placing into
place. Flip the Bath Caddy Tray over and allow the Bath Caddy
Tray to rest on the non-slip grip tape for 72 hours for best
results.
H
B
A
F
E
C
D
G
Grip Tape
INNER WIDTH