Use and Care Guide
© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with xture before
beginning installation. Please conrm product availability and
specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
Technical Specifications
DIMENSIONS
72” L x 36” W x 26” H
(1829 mm) L x (914 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 17-3/8” (441 mm) B: 11-15/16” (210 mm)
CUTOUT
Template provided Part Number BY20000
TOTAL WEIGHT
ED80: 1070 lb (485 kg) / 59 lb/sq. ft. (288 kg/m
2
)
BA06: 1020 lb (462 kg) / 57 lb/sq. ft. (278 kg/m
2
)
OPERATING GALLONAGE
75 U.S. Gal. (284 Liters)
Min. 65 U.S. Gal. (246 Liters)
Max: 85 U.S. Gal. (322 liters)
PRODUCT WEIGHT
ED80: 145 lb (66 kg)
BA06: 95 lb (43 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS — Model ED80 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 115 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD) — Model ED80 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
Allusion
®
7236
WHIRLPOOL BATH
ED80
Allusion® 7236 Whirlpool Bath
Right Hand Pump
Allusion
®
7236
SOAKER BATH
BA06 Allusion® 7236 Bath
• Center Drain Location
• Accessories / Hardware:
HTC Jet Rings Kit: #D095
SCH 40 Rotary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Product Shown: Allusion® 7236 Whirlpool
Bath Right Hand (ED80) Shown.
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
72"
36"
11-15/16"
36"
5" x 5"
8-1/2"
ALLUSION™ 7236, Right Hand
Heater
Motor
12" H x 18" L
Service Access
Opt. Service
Access
END VIEW
H
W
SIDE VIEW
L
4"
2"
ALLUSION
MAX 1"**
(Heater)
(Motor)
#FR13000 10/07
DRAIN/OVERFLOW
A
B