User manual 8inch Tablet Model：TG0803V1 1
Content User manual ...................................................................................................................................... 1 Content .............................................................................................................................................. 2 1 Introduction .................................................................................................................................... 4 1.1 Acknowledgement ................................
10.1 Installation ....................................................................................................................... 50 9.2 Uninstall ............................................................................................................................ 50 11 Troubles Shooting ......................................................................................................................
1 Introduction 1.1 Acknowledgement Thanks for your purchase of our product. TG801，is a 10 1inches high clear board computer. Its CPU is RK3288 , it is based on Android 7.1 operation system, and easy to expand the third application procedure. The product is designed with various functions, including WIFI, BT, FM and so on.
down the MID when it is near to the medical area. To avoid the wireless signal to interrupt the plane- controlled signal, please shut down the MID or using airplane mode when you are boarding a flight, To avoid electronic equipment failure, please shut down the MID in the vicinage of high-accuracy electronic equipments. Please don’t disassemble the MID and accessories. Only authorized agent has access to service the MID.
MID Mobile Internet Device Mobile Internet Terminal WIFI Wireless Fidelity Base on IEEE 802.
2 MID Introduction 2.1 MID Operation and Preparation Battery Charging If this navigator is first used, please use AV adaptor to fully charge it. 1. Apply the power adptor to charge for MID. 2.2 MID Status and Reminder Reminder icons When some remind message appears in your reminder window, please click column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information. Then you can close the reminder window through clicking the column to slide up.
Reminder board Reminder icons will work while receiving emails, WIFI is open, you can open the reminder board to view the detailed information. Open the reminder board When the reminder column shows new reminder icon, please hold the column and slip down your finger, then the reminder board is opened.
3 Quick Start Guide 3.1 Keys Function Keys Funcction Description： Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +（up） increase the volume Volume -（down） decrease the volume HOME button （ home ） Click it in any interface will return to main interface. click it in any interface will return to previous menu Back button（back） Setting button display recently browsed history 3.
power 2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture as below picture, left slide to unlock and enter into camera, right slide the unlock icon to unlock the screen. Picture 3.
3.4 Usage of Touch Screen MID operating methods There are below methods to view the main screen, menu and application procedure in your MID. Click When you want to use the screen keyboard typing or choose application in the main interface, you only need to touch it by your finger. Press on If you want to open some item( textbox or the link in the webpage), or shortcut and main procedure move, you can press on this item.
The extended home page The home page can be extended beyond the wideness of screen to provide more space, which you can put new-added shortcuts and widgets. Click the blank space in home page then slide right or left to extend to the right or left of the screen. In the home page, there are two extended pictures, as Picture 3.3. Picture 3.3 The shortcut icons management in desktop application. Create folder icon in desktop 1.
Picture 3.4 Picture 3.5 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon.
Change the wallpaper of desktop 1． In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2． Click the gallery or wallpaper gallery to select the wallpaper. 3.6 Visit Application Procedures in right top of Picture 3.2, enter into main interface as Picture 3.6, choose the application procedure you want to visit. Click Picture 3.6 3.
Picture 3.7 Copy the document into memory card 1. Connect the MID to computer with USB cable. 2. As MID storage configuration, it is connected with computer successfully. 3. Open the “My computer” in your computer, check the items in “removable disc”. 4. Copy the documents you need into “removable disc”. 5. After copying finishes, click “shutdown the USB storage configuration” to uninstall.
1. Android keyboard 2. Google Pinyin Choose the typing method you want 1. Click Setting pocedure application. 2. Click Language and Keyboard. 3. In the text setting area will reveal all the installed words-typing methods in your MID. 4. Tick the typing method you want. Use and switch of input method ⑤ ① ② ④ Picture 3.
3.9 Operation Technique Enter widgets interface In the application interface,click widgets on the above of screen, or slide the screen, it will swtich into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
4 Basic Setting 4.1 Wireless and Internet 1. Connect Wi-Fi 1) In the main menu or interface, choose setting application procedure. 2) Click WLAN, open wifi, MID will automatically search the available Wifi wireless internet. As Picture 4.1 3) Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect. Picture 4.1 2. Add Network 1) Click icon in right top, as Picture 4.2 Picture 4.
2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.3 Picture 4.3 3. Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.3 4. Keep WI-FI on during sleep.. 1. Click icon in right top of Picture 4.6, select advanced. 2. Click Keep WI-FI on during sleep, as Picture 4.4 Picture 4.4 4.2 Bluetooth Bluetooth function operation 1.
Picture 4.5 4. Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect. 5. After match successfully, choose the operation you want to, click to enter into Picture 4.6. Picture 4.6 Bluetooth setting 1. Rename tablet Click icon in right top of Picture 4.5, as Picture 4.
Picture 4.7 2.Display the file you received Choose display the file you received in Picture 4.10, you can view download and upload files. 4.3 Data Usage Check SIM card data usage, as Picture 4.7 Picture 4.
4.4 More 4.4-1 Airplane Mode Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.4-2 VPN Open VPN, click add VPN network, as Picture 4.8. Input name and server address, then save. Picture 4.8 Click VPN, as Picture 4.9, input VPN user name and password, click connect.
Picture 4.9 4.4-3 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2. Click more when wifi is well connected, open network share and portable hotspot Picture 4.
Picture 4.11 3. Click keep WI-FI hotspots on, choose open time. 4. Return to previous menu, open portable WLAN hotspots, click Set up WI-FI hotspots. Picture 4.12 5. Set passwords you want to, password should be more than 8 numbers. 4.4-4 GPRS data prior mode After Open GPRS data prior mode, systems will priority chooses your network. 4.5 Sound & notification 1. Open settings, click contextual model, as Picture 4.
Picture 4.13 2. Click standard to enter into Picture 4.14 Picture 4.14 1. Vibrate In picture 4.20, click vibrate, MID will vibrate when someone calls you. 2. Volume In picture 4.15, click volume, you can set ringtone, notice, and alarm volume, as Picture 4.15 Picture 4.
4.6 Display 4.6-1 Adjust the screen brightness 1. Click Setting application procedure. 2. Click display, choose brightness, 3. Drag the portlito to adjust the brightness volum e.As Picture 4.16 Picture 4.16 4. Click OK after brightness is adjusted. 4.6-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—live wallpapers---gallery(user defined)r, as Picture 4.
Picture 4.17 4.6-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate MID screen by G-sensor. 4.6-5 Font size Click font size to adjust the font size, as Picture 4.19 Picture 4.19 4.7 Storage Open setting function, click memory, click preferred install location, you can choose isntall new application to choose preferred install location. Check SD card and MID storage space.
3. Enter into setting application. 4. Click storage, check storage space. 1. Internal storage (1) System storage System storage is the spcae MID leave for system file, as Picture 4.20. it can’t be viewed. Picture 4.20 (2)Internal storage Internal storage is MID local NAND storage, as Picture 4.21, if you need to check the storage content, you can check it in main menu. Picture 4.
2. SD card You can check storage space, SD card available space, unmount SD card and erease SD card, as Picture 4.22 Picture 4.22 Safely remove SD card 1. Click setting application. 2. Click memory. 3. Click uninstall SD card. 4. Now you can remove SD card safely. Note: Removing SD card safely can protect SD card and increase its lifetime. 4.8 Application program 1. Click setting application in Apps. 2.
Picture 4.24 4.10 Account and Sync 1. Select setting application 2. Open account and sync, as Picture 4.25 Picture 4.25 3. Click add an account, as Picture 4.
Picture 4.26 4. After successfully load, it will open the sync function, as Picture 4.27 Picture 4.27 4.11 Location service Click setting, select Mode, as Picture 4.
Picture 4.28 4.12 Safety setting Set locked screen Lock the touch screen by unlock icon or password to protect your MID. Note: After setting screen locked, you should enter the passcode each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click safe. 3. Click locked the screen. 4. Choose picture in text setting area. 5. Click next following the remind message. 6.
Picture 4.29 Set unlock PIN code 1. Click setting application in main interface. 2. Click safe. 3. Click screen locked. 4. Choose PIN in text setting area. 5. Enter new PIN code(numbers) and click continue. 6. Ener new PIN code again and click confirm. Set unlock password 1. Click setting application in main interface. 2. Click safe. 3. Click screen locked. 4. Set password in text seting area. 5. Set new password(letters and numbers) and then click continue. 6.
Picture 4.30 Note: Manual installing APK files needs to turn on unknown source. 4.13 Language and Input Method Click setting, select language and input method, choose language to switch language, as Picture 4.31 Click setting, choose language and input, choose Android keyboard setting, click input language, as Picture 4.
Picture 4.32 Choose the language you want to change in the language list, as Picture 4.33 Picture 4.33 4.14 Backup and Reset If you need to recovery factory reset, please click reset, as Picture 4.34, if you need to formulate NAND, please click reset tablet.
Picture 4.34 4.15 Date and Time According to the preset, system will voluntorily apply the date, zone, and time provided by internet. Manual set date, time and zone 1． Click Setting application procedure. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
Picture 4.35 Note: If you use the time internet provided, you will not able to set the date, time and time zone. 4.16 Scheduled power on and off 1. Click Setting application procedure 2. Click scheduled power on and off. 3. Operate as below Picture 4.36 Turn on/off fixed-time startup Click it into scheduled power on setting Turn on/off fixed-time shutdown Click it into scheduled power off setting Picture 4.36 4.17 Assisstance Function 4.17-1.
4.17-2. Click power button to end calls When Click call, press “power” button, call will end but not hold. 4.17-3. Touch and hold delay Click touch and hold delay to increae time, as Picture 4.37 Picture 4.37 4.17-4 Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.18 Engineer Selection 4.
4.18-6 Show CPU usage After open CUP usage, in the right top of MID will show CPU usage situation.as Picture 4.38 Picture 4.38 4.19 About Tablet Check MID state 1. Check Setting application. 2. Click about tablet, check state message, model, Android version, version No and so on. 3. Click state message, check battery state, battery volumne, SIM state, IMEI number, IP address. Multi-Media 5.
Previous song Pause/play Next song Picture 5.1 Random play Picture 5.2 Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.
5.2 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2. Enter into gallery, click the folder you want to view. 3. Click the picture you want to view, the system will play it in full screen mode automatically. 4.
5.3 Camera In the main interface or desktop, click camera application procedure , enter into camera Operation of camera ,Switch camera: choose Menu key, click switch front/back View camera, as Picture 5.4 pictures videos normalCamera mode the and Switch front/back camera Click it to take pictures camera shootin mode Switch the panoramic play mode. Picture 5.
6 Internet 7.1 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Yahoo, Gmail, Hotmail and 163),as Picture 7.2 Picture 6.1 a. Email Setting 1． After you click the sending email icon which can help you to set. , you can see the email setting guide, 2． Input your email address and password. 3． Click “Next step” button, choose your email type is POP3 or IMAP.
。 Click 1. 2. 3. 4. 5. Enter into your mail box. Press Menu key. Click Account Press the account you want to delete. Click confirm to remove. c. Send E-mail 1． Click to display your mail box. 2． Click the inbox, it will refresh the new emails automatically; click it to read new email. 3． Press Menu key. Menus will popup. 4． Click Edit to enter into new email editing interface. 5． Input the receiver’s email address. 6． Input the subject and email content.
7 Other Application Procedures 7.1 Clock Click Clock procedure, enter into below interface as Picture 9.1. There are clock, picture, music and homepage buttons. Set alarm Picture 7.1 7.2 Calculator 1. Click. 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate.
Pictuer7.2 7.3 Explorer File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon manager.
Picture7.3 a、Copy, cut, delete, rename the files and folder: choose the file or folder, long pressthe file or folder to enter into the interface as Picture 7.4, you can operate the file or folder. Picture7.4 b、Copy or cut file: choose the file you want to paste, press the file till a new menu comes out, select copy and open the folder where you want copy the files. Press at the right-top side, select paste. Picture7.
Picture 7.6 C. Share file:choose any file, long press it, it will popup “share”, choose the share way you want in the list d、Install apk file：Choose the file suffixed .apk in the file manager, you can install the third part software as reminder. e、Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 7.
Picture7.
10 Installation of Procedures 10.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 9.2 Uninstall Uninstall application procedure 1.
11 Troubles Shooting 1. The first startup of MID is slow After the MID system upgraded, the first startup need to install the pre-installed application softwares, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. 3. MID can’t connect Wi-Fi Make sure the wireless router of internet service can work in normal. Ensure the MID and wireless router in certain distance, and no wall or other barrier between them. Ensure the user name and password both correct.
FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
