TD191 USB Dongle Quick Start Guide Please read this Quick Start Guide and save it for future reference before using the TD191 USB Dongle.
LEGAL INFORMATION Copyright © 2018 JACS SOLUTIONS,Inc. All rights reserved. JACS Solutions Inc. is practicing the concept of sustainable development, therefore, JACS Solutions Inc. reserves the right to make modifications on print errors or update specifications in this manual without prior notice.
Product Appearance Thank you for purchasing the JACS product. The following figure is only for your reference. The actual product may be different. 1.Dongle Cap 2.Front Cover 3.Indicator Light 4.USB Connector 5.T-Flash Card Slot 6.Nano-SIM Card Slot Hardware Installation Please use standard nano-SIM card. Inserting non-standard nano-SIM card or standard-SIM card or micro-SIM card could cause the SIM card to be unrecognized or the damage of the card slot.
Step2. Install a nano-SIM card to the nano-SIM card slot and a T-flash card to the T-flash card slot. Step3. Slide the front cover gently back into place.
Using Your Dongle Insert the dongle into your device’s USB port securely. The operating system will automatically detect, identify your dongle and start the driver installation wizard. The device will then be recognized as a “Remote NDIS based Internet Sharing Device” in Device Manager on Windows operating systems.
After the dongle is correctly powered, the indicator light will be on. Different colors indicate the different working status of the dongle, as shown in the following table.
are choking hazards and may lead to lethal danger and/or critical injury; If improperly shielded, some electronic devices may be affected by the electromagnetic interference from the dongle, such as the electronic system of vehicles. Consult the manufacturers of such devices before using the dongle if necessary; Operating the dongle may interfere with medical instruments such as pacemakers, cochlear implants, and hearing aids.
national regulations, or void the warranty. Only qualified personnel can disassemble and repair the dongle. Warranty This warranty only applies if the product has been used in accordance with the manufacturer’s instructions under normal use and with reasonable care.
Hereby, JACS SOLUTIONS INC declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For full text declaration of conformity, visit the Web site www.jacs-solutions.com/certification. Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted used by located carriers.
Statement This device complies with part 22/24/27/90 of the FCC rules and Innovation, Science and Economic Development Canada’s licence-exempt RSS(s), operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
- Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help - This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.