Jabra BIZ™ 2400 USB User manual 1
© 2011 GN Netcom A/S. All Rights Reserved. This user guide is published by GN Netcom A/S. The information in this user guide is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by GN Netcom A/S. GN Netcom A/S assumes no responsibility or liability for any errors or inaccuracies that may appear in this user guide. Written and designed at GN Netcom A/S, Lautrupbjerg 7, 2750 Ballerup, Denmark, www.jabra.com.
Headband Assembly Headband Ear cushion Ear hook Assembly Ear hook ring Neckband Assembly Ear gel Neckband 8 Neckband ring Clothing Clip Ear hooks (Small/Large) Name tag Transparent cover 3
How to connect headset to PC Plug the headset directly into a free USB port on your PC. Once connected, the headset's mute and hookswitch buttons will be illuminated. The first time connected, your PC displays a small pop-up message in the task bar to indicate that a new device has been found. You are now ready to use the headset. How to Wear the Duo and mono Headset Adjust the headband length. The headband is adjustable in length to fit the size of your head.
How to rotate the boom arm. The boom is free to rotate 360o How to attach the ear cushion. Align the ear cushion against the neckband ear plate so that the groove in the ear cushion slips around the ridge of the ear plate. Rotating the cushion will ensure it snaps securely into place (you can remove it as you attach it). Wearing the mono Headset With the Headband The mono Jabra BIZTM 2400 model include a headband. How to remove the headband Remove the ear cushion by gently pulling it off the ear-plate.
How to press the headset into the headband ring on the headband. Hold the headband in one hand and the headset in the other. Align the headset against the outside of the headband ring with the headset cable pointing down. Gently press the headset into the headband ring until it clicks into place. Wearing the Mono Headset with an Ear Hook Two sizes of ear hook are included with some Jabra BIZ 2400 models, they can also be purchased as an accessory for any mono model. To use it: 1. How to attach the ear gel.
4. How to wear the ear hook. To wear the headset, slip the ear hook behind your ear while keeping the ear gel centred into the middle part of your ear. The ear hook comes in two sizes for optimal fit. Please try both for best personal support and fit. Wearing the Mono Headset with the Neckband A neckband wearing style is included some Jabra BIZ 2400 model, the neckband can also be purchased as an accessory. 1. How to press the headset into the neckband ring.
How to adjust volume on the Headset Use the wheel at the center of the USB controller to adjust the volume. Turn clockwise to turn up and counterclockwise to turn down. You will hear a soft click in the headset each time you adjust the volume. When you reach maximum volume, the headset will beep twice as a warning. We recommend that you do not use the headset at full volume. HOW TO MUTE THE HEADSET Tap the mute button on the USB controller to mute the headset microphone.
HOW TO ACTIVATE OPTIONAL FEATURES HOW TO USE THE SOFT BUTTONS The USB controller includes two soft buttons, labeled × and O, respectively. You are able to program the headset to use these two buttons for any of several functions. For example, you can configure one of the soft buttons to control the Bluetooth connection to a mobile phone See the section about using Jabra PC Suite, below, for details.
Jabra PC Suite Programs After installing the software, you will have an All Programs > Jabra > Jabra PC Suite folder in your Windows Start menu. It provides links to the following programs: - Jabra Control Center Enables you to configure your headset from your PC. - Jabra Device Firmware Updater Enables you to update the headset firmware. - Jabra Devices Service Runs in the background and monitors your USB ports for Jabra devices.
Use the settings in the Audio protection (Intellitone) area of the Settings tab to set the hearing-protection level of your headset. Hearing risk is evaluated as a function of both volume and duration. Therefore, the maximum sound level should be lowered as the number of hours you spend using the headset increases. The headsets offer a choice of four protection levels.
3. On your PC, use the Start menu to run the firmware-update application of the Jabra PC Suite. 4. Follow the instructions on your screen to identify your headset model, select the firmware update file and apply it. See also the Jabra PC Suite online help for more details. How to use the headset with a Mobile Phone The USB controller on the headset includes a Bluetooth circuit, which gives you up to 10m range between the headset and a mobile phone.
Once you have selected the mobile as one of the functions for your softbuttons, a Mobile tab will appear in the Jabra Control Center. You will be able to clear your paring list, thereby deleting the mobile phones paired to the headset. Once you have clicked Clear pairing list – the headset will automatically enter a pairing mode.
Certification and safety approvals CE This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, GN, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.jabra.com. FCC This device complies with part 15 of the FCC Rules.
Made in China www.jabra.com 32-00706 D © 2011 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice).
