Jabra Evolve 65t User manual
© 2018 GN Audio A /S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in China MODEL: OTE070 / OTE071 / CPB070 / END040W Declaration of Conformity can be found on www.jabra.
2.1 Included accessories 3. How to wear....................................8 3.1 Changing EarGels ENGLISH 1. Welcome..........................................5 2. Jabra Evolve 65t overview...........6 4. How to charge............................. 10 4.1 Opening the charging case 4.2 Charging the earbuds 4.3 Charging the charging case 4.4 What the LEDs mean 5. How to connect........................... 14 5.1 Connecting to a computer 5.2 Pairing with a smartphone 6. How to use ..........................
6.11 Voice assistant 6.12 Update firmware 6.13 How to reset 7. Jabra Sound+ app....................... 25 8. Jabra Direct 2.0........................... 26 9. Support......................................... 27 ENGLISH 6.10 Voice guidance and languages 9.1 FAQ 9.2 How to care for your earbuds 9.3 Replacement accessories 9.4 Using the replacement earbuds 9.5 Using a replacement charging case 9.
Thank you for using the Jabra Evolve 65t. We hope you will enjoy it! Jabra Evolve 65t features ENGLISH 1.
Jabra Evolve 65t earbuds ENGLISH 2.
EarGels S Micro-USB cable ENGLISH 2.
ENGLISH 3. How to wear Insert the earbud into your ear and rotate to fit comfortably. Ensure the microphone is pointing towards your mouth.
For the optimal audio experience, it is recommended to try each of the different EarGel sizes. The fit should feel tight and secure in your ear. The medium EarGel is premounted on the earbuds. Ensure the EarGel is firmly attached. S M ENGLISH 3.
With up to 5 hours of battery in the earbuds, and 2 recharges in the charging case, the Jabra Evolve 65t offers up to 15 hours of playtime. ENGLISH 4. How to charge 4.1 Opening the charging case Firmly hold the charging case and press the small tab on the lid while opening the lid.
Place the earbuds in the charging case and close the lid. The battery LED inside the charging case will flash red, yellow or green when the lid is opened to indicate the earbuds current battery status. ENGLISH 4.2 Charging the earbuds It takes approx. 2 hours to fully recharge the earbuds. If the earbuds are at low battery, you will get up to 1 hour of playtime by charging them in the charging case for 10 to 20 minutes.
Plug the charging case into a USB power supply or certified wall charger. It takes approx. 2 hours to fully charge the earbuds and the charging case. ENGLISH 4.3 Charging the charging case The charging case is designed to charge using a standard USB voltage. It is not recommended to charge using a higher voltage. Note: non-certified chargers may take longer to charge.
LED LED EARBUD STATUS High battery/Power on Medium battery Low battery/Off Very low battery/ Power off Connecting/ Incoming call ENGLISH 4.
5.1 Connecting to a computer 1. Ensure the earbuds are powered on. 2. Plug the Bluetooth adapter (Jabra Link 370) into a USB port on your computer. The computer will set up the earbuds and notify you when the connection is ready. 3. You may need to set the Jabra Link 370 as the default audio device on your computer. ENGLISH 5. How to connect The Jabra Evolve 65t and the Bluetooth adapter(Jabra Link 370) are pre-paired. It is recommended to download and install Jabra Direct 2.0 (build version 4.
1. Ensure the right earbud is powered off and not in the charging case. To manually power off the earbud, hold the Multi-function button until the LED flashes red. 2. Hold the Multi-function button on the right earbud for 5 seconds until you hear the connection instructions in the earbud and the LED flashes blue. Release the button, and follow the voice-guided instructions to pair to your smartphone. 3. You may need to hold the Volume down button for 1 second on the left earbud to power it on.
Volume up LED L Volume down LED R ENGLISH 6. How to use MultiFunction Button 6.1 Turn the earbuds on/off Place the earbuds in the charging case to turn them off, or remove them from the charging case to turn them on. The earbuds can be turned on or off individually by holding the Multi-function button on the right earbud, or the Volume down button on the left earbud, until the LED flashes green (on) or red (off).
The right earbud can be used alone for mono playback, or for calls. For volume, and/or skip track controls, use your connected smartphone. ENGLISH 6.2 Mono earbud use When both earbuds are turned on and within 20 centimeters (8 inches) of one another, they will automatically relink. 6.
Calls & music Adjust volume Press the Volume up or Volume down button Skip track Hold (2 secs) the Volume up or Volume down button when listening to music Battery status Press the Volume up or Volume down button when not on a call or listening to music Volume up Volume down ENGLISH Left earbud 6.4 Sidetone Sidetone enables you to hear your own voice when you are on a call. Sidetone settings can be configured using the Jabra Sound+ app for smartphones, or Jabra Direct 2.0 (build version 4.
With the touch of a button you can be more aware of your surroundings with HearThrough, which conveniently filters in the sounds that surround you. Right earbud ENGLISH 6.5 HearThrough HearThrough HearThrough on/off Double-press the Multi-function button when not on a call HearThrough settings can be configured using the Jabra Sound+ app for smartphones, or Jabra Direct 2.0 (build version 4.0 or later) for computers.
When you remove an earbud from your ear while listening to music, the music will automatically pause. ENGLISH 6.6 Auto-pause music To resume the music, place the earbud back into your ear within 60 seconds. After 60 seconds (or when mono playback is preferred) the music can be resumed by pressing the Multi-function button. Auto-pause music settings can be configured using the Jabra Sound+ app for smartphones, or Jabra Direct 2.0 (build version 4.0 or later) for computers.
To conserve battery the right earbud will automatically power off when it is out of range of your smartphone or Bluetooth adapter (Jabra Link 370) for 15 minutes and is not in the charging case, or when it has been inactive for 1 hour. ENGLISH 6.7 Auto power off The left earbud will automatically power off when it has not had a link with the right earbud for 15 minutes and is not in the charging case.
The earbuds can accept and handle multiple calls at the same time on multiple devices. Right earbud ENGLISH 6.9 Multiple call handling Multiple call handling End current call and answer incoming call Press the Multifunction button Put current call on hold and answer incoming call Hold (1 secs) the Multi-function button Switch between held call and active call Hold (1 secs) the Multi-function button Reject incoming call, when on a call Double-press the Multi-function button 6.
To activate your smartphone’s Voice assistant (e.g. Siri, Google Assistant, Alexa) hold the Multi-function button when not on a call. ENGLISH 6.11 Voice assistant Voice assistant settings can be configured using the Jabra Sound+ app. 6.12 Update firmware The Jabra Evolve 65t can be updated to the latest firmware version using the Jabra Sound+ app for smartphones, or Jabra Direct 2.0 (build version 4.0 or later) for computers.
Resetting the earbuds clears the list of paired devices and resets all settings. The earbuds can reset manually, or by using Jabra Direct 2.0 (build version 4.0 or higher). Right earbud ENGLISH 6.13 How to reset Manually reset earbuds Reset pairing list and settings Hold (10 secs) the Multi-function button until the LED flashes purple. After a reset, the earbuds will need to be re-paired to your Bluetooth adapter (Jabra Link 370), or to your smartphone.
Jabra Sound+ app ENGLISH 7.
Jabra Direct 2.0 (build version 4.0 or later) is computer software designed to support, manage, and enable optimal functionality for your Jabra Evolve 65t. ENGLISH 8. Jabra Direct 2.0 Download via jabra.
9.1 FAQ View the FAQs on Jabra.com/help/evolve65t. ENGLISH 9. Support 9.2 How to care for your earbuds • Always store the earbuds in the charging case and safely protected. • It is recommended to store the earbuds between 15°C and 25°C (59°F and 77°F). To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
ENGLISH • Remove and clean the eargels regularly to avoid earwax buildup on the speakers. • The charging case is designed to charge using a standard USB voltage. It is not recommended to charge using a higher voltage. 9.3 Replacement accessories Replacement or additional accessories can be purchased online at jabra.com/accessories.
The replacement earbuds cannot be used with your old earbuds. 1. Place the replacement earbuds into the charging case and close the lid. 2. Open the charging case lid and remove the earbuds. 3. Wear the earbuds and follow the voice instructions to pair to your smartphone. 4. Update the earbud firmware using the Jabra Sound+ app. ENGLISH 9.
Before using a replacement charging case for the first time, it will need to be synced with your current earbuds and charged for 1 hour. ENGLISH 9.5 Using a replacement charging case To begin syncing, place your current earbuds inside the replacement charging case, and close the lid. The LED on the charging case may flash purple to indicate that the firmware is being updated. Please wait until the LED stops flashing purple before opening the charging case.
1. Download and install Jabra Direct 2.0 (build version 4.0 or later). 2. Plug the Bluetooth adapter (Jabra Link 370) into a USB port on your computer. 3. Ensure the right earbud is powered off and not in the charging case. To manually power off the earbud, hold the Multi-function button until the LED flashes red. 4. Hold the Multi-function button on the right earbud for 5 seconds until you hear the connection instructions in the earbud and the LED flashes blue. Release the button. 5.