Jabra Elite Active 65t User manual
© 2018 GN Audio A /S. All rights reserved. Jabra ® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in China MODEL: OTE070 / OTE071 / CPB070 Declaration of Conformity can be found on www.jabra.
2.1 Included accessories 3. How to wear....................................8 3.1 Changing EarGels ENGLISH 1. Welcome..........................................5 2. Jabra Elite Active 65t overview.. 6 4. How to charge............................. 10 4.1 Opening the charging case 4.2 Charging the earbuds 4.3 Charging the charging case 4.4 What the LEDs mean 5. How to pair................................... 14 5.1 Pairing with a smartphone 6. How to use .................................. 15 6.
6.12 Update firmware 6.13 How to reset 7. Jabra Sound+ app....................... 23 8. Support......................................... 24 ENGLISH 6.11 Voice assistant 8.1 FAQ 8.2 How to care for your earbuds 8.3 Replacement accessories 8.4 Using the replacement earbuds 8.
Thank you for using the Jabra Elite Active 65t. We hope you will enjoy it! Jabra Elite Active 65t features • • • • • • ENGLISH 1. Welcome 4-microphone enhanced sound Customize your music Proven wireless connection Up to 15-hours battery Voice Assistant enabled 2-year warranty (dust and sweat).
Jabra Elite Active 65t earbuds ENGLISH 2.
EarGels S Micro-USB cable ENGLISH 2.
ENGLISH 3. How to wear Insert the earbud into your ear and rotate to fit comfortably. Ensure the microphone is pointing towards your mouth.
For the optimal audio experience, it is recommended to try each of the different EarGel sizes. The fit should feel tight and secure in your ear. The medium EarGel is premounted on the earbuds. Ensure the EarGel is firmly attached. S M ENGLISH 3.
With up to 5 hours of battery in the earbuds, and 2 recharges in the charging case, the Jabra Elite Active 65t offers up to 15 hours of playtime. ENGLISH 4. How to charge 4.1 Opening the charging case Firmly hold the charging case and press the small tab on the lid while opening the lid.
Place the earbuds in the charging case and close the lid. The battery LED inside the charging case will flash red, yellow or green when the lid is opened to indicate the earbuds current battery status. ENGLISH 4.2 Charging the earbuds It takes approx. 2 hours to fully recharge the earbuds. If the earbuds are at low battery, you will get up to 1 hour of playtime by charging them in the charging case for 10 to 20 minutes.
Plug the charging case into a USB power supply or certified wall charger. It takes approx. 2 hours to fully charge the earbuds and the charging case. ENGLISH 4.3 Charging the charging case The charging case is designed to charge using a standard USB voltage. It is not recommended to charge using a higher voltage. Note: non-certified chargers may take longer to charge.
LED LED EARBUD STATUS High battery/Power on Medium battery Low battery/Off Very low battery/ Power off Connecting/ Incoming call ENGLISH 4.
5.1 Pairing with a smartphone 1. Ensure the right earbud is turned off and not in the charging case. To manually turn off the earbud, hold the Multi-function button until the LED flashes red. 2. Next, hold the Multi-function button on the right earbud for 5 seconds until you hear the connection instructions in the earbud and the LED flashes blue. Release the button, and follow the voice-guided instructions to pair to your smartphone. 3.
Volume up LED L Volume down LED R ENGLISH 6. How to use MultiFunction Button 6.1 Turn the earbuds on/off Place the earbuds in the charging case to turn them off, or remove them from the charging case to turn them on. The earbuds can be turned on or off individually by holding the Multi-function button on the right earbud, or the Volume down button on the left earbud, until the LED flashes green (on) or red (off).
Right earbud Calls & music Play/pause music Press the Multi-function button Answer/end call Press the Multi-function button Reject call Double-press the Multifunction button when there is an incoming call Voice assistant ((Siri, Google Assistant, Alexa)) Hold (1 sec) the Multi-function button when not on a call HearThrough on/off Double-press the Multi-function button when not on a call ENGLISH 6.
Calls & Music Adjust volume Press the Volume up or Volume down button Skip track Hold (2 secs) the Volume up or Volume down button when listening to music Battery status Press the Volume up or Volume down button when not on a call or listening to music Volume up Volume down ENGLISH Left earbud 6.3 HearThrough HearThrough utilizes the built-in microphones to enable you to pay attention to your surroundings and engage in conversation without needing to remove the earbuds.
Sidetone enables you to hear your own voice when you are on a call. Sidetone settings can be configured using the Jabra Sound+ app. ENGLISH 6.4 Sidetone 6.5 Auto-pause music When you remove an earbud from your ear while listening to music, the music will automatically pause. To unpause the music, place the earbud back into your ear within 60 seconds. After 60 seconds (or when mono playback is preferred) the music can be unpaused by pressing the Multi-function button.
To conserve battery the right earbud will automatically power off when it is out of range of your smartphone for 15 minutes and is not in the charging case, or when it has been inactive for 1 hour. ENGLISH 6.6 Auto power off The left earbud will automatically power off when it has not had a link with the right earbud for 15 minutes and is not in the charging case.
The earbuds can accept and handle multiple calls at the same time. Right earbud ENGLISH 6.8 Multiple call handling Multiple call handling End current call and answer incoming call Press the Multifunction button Put current call on hold and answer incoming call Hold (2 secs) the Multi-function button Switch between held call and active call Hold (2 secs) the Multi-function button Reject incoming call, when on a call Double-press the Multi-function button 6.
Voice guidance can be turned on/off and the language can be changed using the Jabra Sound+ app. The following languages are available: English, French, German, Japanese, Chinese. ENGLISH 6.10 Voice guidance and languages 6.11 Voice assistant To activate your smartphone’s Voice assistant (e.g. Siri, Google Assistant, Alexa) hold the Multi-function button when not on a call. To change Voice assistant, download the Jabra Sound+ App and go to the Voice assistant settings.
Resetting the earbuds clears the list of paired devices and resets all settings. Right earbud ENGLISH 6.13 How to reset Reset earbuds Reset pairing list and settings Hold (10 secs) the Multi-function button until the LED flashes purple. The earbuds will need to be re-paired to your smartphone.
Jabra Sound+ app ENGLISH 7.
8.1 FAQ View the FAQs on Jabra.com/help/eliteactive65t. ENGLISH 8. Support 8.2 How to care for your earbuds • Always store the earbuds in the charging case and safely protected. • To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions. • It is recommended to keep the earbuds between 15°C and 25°C (59°F and 77°F).
ENGLISH • Remove and clean the eargels regularly to avoid earwax buildup on the speakers. • The charging case is designed to charge using a standard USB voltage. It is not recommended to charge using a higher voltage. 8.3 Replacement accessories Replacement or additional accessories can be purchased online at jabra.com/accessories.
The replacement earbuds cannot be used with your old earbuds. 1. Place the replacement earbuds into the charging case and close the lid. 2. Open the charging case lid and remove the earbuds. 3. Wear the earbuds and follow the voice instructions to pair to your smartphone. 4. Update the earbud firmware using the Jabra Sound+ app. ENGLISH 8.4 Using the replacement earbuds 8.
ENGLISH REV H jabra.
