JABRA EHS CISCO 78-79-8800 User manual

3
2
1
DATASHEETJABRA LINK™ 14201-43
The Jabra Link 14201-43 enables remote Electronic Hook
Switch Control (EHS) with Jabra wireless headsets and the
Cisco Unified IP phone 6945, 78xx, 79xx and 88xx series.
Jabra wireless headsets with EHS functionality boost
productivity as they provide the user with the ability to
answer and end a call, while away from their desk.
THE EHS ADAPTER ALLOWS THE USERS TO
- Hear ring tones
- Answer and end calls
- Mute the microphone
All from their headset and quite convenient, when they are
up to 150 meters/450 feet away from their desk. The inte-
gration of desk phone and headset allows users to benefit
from enhanced mobility and the ability to multitask while
on a call. The wireless freedom improves work efficiency
and ergonomics throughout the day.
HOW IT WORKS
The Jabra Link 14201-43 converts from the EHS standard
used in Cisco phones to the Jabra IQ™ standard used in
Jabra headsets – and vice versa.
COMPATIBILITY
The Jabra Link 14201-43 is compatible with the Cisco Unified
IP phone 6945, 78xx, 79xx, 88xx and most Jabra wireless
headsets. For more details see the specifications on page 2.
EASY TO UPGRADE
The Jabra Link 14201-43 is software upgradable. Simply
connect a micro-to-standard-USB cable between the Jabra
LINK 14201-43 and your computer’s USB port. Update the
firmware through Jabra Direct, which can be downloaded
from www.jabra.com/direct.
JABRA LINK™
14201-43
Electronic Hook Switch Solution
for Cisco 6945, 78xx, 79xx, 88xx
Series Desk phones
JABRA.COM
1. Connect the normal audio phone cable (‘RJ9’, not included
with Jabra Link 14201-43) from the Cisco phone to the Jabra
headset base
2. Connect Link 14201-43 to AUX port on Jabra headset base
3. Connect Link 14201-43 to headset AUX port on Cisco phone