Installation Instructions

Bluetooth Transmitter Status:
1. When first time using, plug the Bluetooth transmitter into the USB port of the computer. The
transmitter will enter the pairing status when your pairing list is empty and the LED indicator on
the transmitter flashes red and blue alternately. Take the earbuds out immediately to pair.
The LED indicator will flash blue every 2 seconds if connected successfully.
2. If you have paired the Bluetooth transmitter to earbuds once, your transmitter will enter the
re-connection status for 10 seconds when you re-plug the transmitter. The LED indicator flashes
blue every 2 seconds. If you take earbuds out of the case immediately during the re-connection
status, you can connect them successfully.
If the transmitter fails to re-connect in 10 seconds, it will enter the paring status automatically to
search for new devices. In the paring status, the LED indicator flashes blue and red alternately.
Take out another pair of earbuds within one minute to connect them. After a minute, the
transmitter will automatically turn into the re-connection status to search for the former-paired
device. The LED indicator flashes blue every 2 seconds in the re-connection status, and the
transmitter will stay in this status.
Note:
Except for the first-time pairing, the Bluetooth transmitter goes through these 3 stages in order
every time you use it.
(To sum up: 10-second re-connection status ------> 1-minute pairing status ----> re-connection
status that lasts)
With no other operation required, the Bluetooth earbuds will be connected to the BT110
transmitter automatically after the earbuds are on and enter the pairing status.