User Manual

Volume Up
Volume Down
Mic
Connector
Power
Connector
Switch
Turn On/ Off Pairing
Speaker
Operating manual:
Turn on the Car Kit
Turn up the Power On/Off to switch on and an orange LED follows. An indication
of music and LED off once the process of switch on is completed.
For the first time pairing to blue tooth mobile, it automatically goes to pairing
mode.
For non-first time pairing, it automatically goes to standby mode.
Pairing Mode
The twinkle of green & red LED indicates the Car Kit is in pairing mode, the
pairing PIN is 0000. Once the Car Kit completes the pairing process, it stays in
standby mode.
Note: Under the pairing mode, you may select the music by pressing the Talk
button.
Standby Mode.
The Car Kit goes to standby mode under circumstances as below:
1. The Car Kit has successfully paired to your cell phone.
2. After disconnect calls.You are able to answer incoming calls under the standby
mode.
Auto-answer incoming calls
Under the standby mode, the Green LED shows auto-answer incoming calls function
is on. The Red LED shows auto-answer incoming calls function is off.
To set up the auto-answer function by press both Volume Up and Volume Down under
the standby mode.

Summary of content (4 pages)