User Manual V628M
Operating Instructions Thank you for choosing J-Tech Digital wireless vertical mouse V628M. Please read the user manual carefully when using this product. When charging this mouse, the indicator light next to the type-C connector will light up, the light will turn off once the battery is fully charged.
Operating Instructions Vertical/upright mouse, with a sleek shape design 2 connection modes: 2.4GHz USB transceiver, Bluetooth 4.0 Built-in rechargeable Li-polymer battery Plug the USB Nano receiver to a USB port in your computer, after detecting successfully the mouse will begin to function. 800/1200/1600/2400 3.7V 25mA Connection Instructions 1. When the Nano receiver is plugged into a USB port, your computer will detect the device automatically 2. The mouse will then function when turned on. 2.
Operating Instructions Bluetooth: Set the 1/2 switch at the bottom of the mouse to 2, then press the Bluetooth button at the bottom of the mouse to make the mouse discoverable. When the button is pressed, the color-changing LED on the side of the mouse will begin toflash. The mouse should now appear as an available device on your computer, once it is paired to the computer, the LED light will stay on. The color-changing LED on the side will flash when the DPI setting is changed.
Operating Instructions 2.
Operating Instructions 3.Macro setting: On the drop-down menu select "Assign Macro" to then click "Macro Manager" to pull up the Macro settings window. Next, click "NEW" and name the Macro then hit Enter to set the name. Then click the "Start Record" button under Record Options. Once you are done recording the function, click "Stop Record" and click OK to save the Macro. After a Macro is saved, it can be edited or overwritten at any time. 4. Other functions: Basic = Cut, Copy, Paste, etc.
Operating Instructions 4. Hold down the middle button (scroll wheel) and right click button at the same time for about 3 seconds then release them. The connection should take about 10 seconds to stabilize once again. 5. If after 10 seconds the connection has not stabilized, repeat steps 1-4 again.