Operating Instructions Specification of Dial 1. Dial Press the middle button of the dial to activate the knob functional selling interface {can only be activated after the driver is installed). The interface will show up in the lower right comer, and can be moved with a mouse, by clicking the center of the interface arid dragging to a few spot. You can select the function by rotating the dial or clicking the mouse; 2.
Operating Instructions 7. Combo keys (3 : click “Clear setting” 3 and type the keys you need if you want fo change the combo. You can also click 8 to add mouse function in the combo. 8 Macro 0 Click “Record” 8 and add action on the window, click add new action or delete action. Pressing one bullion can make things happen without having to type the full instructions. Record delay and record cycles @§ can be set. More practical and interesting functions are walling for vou to explore. 8.
Operating Instructions 3. Click “Apply” (@ to activate the setting. Under any mode, click “Clear settings” @ to clear all the setting and "Default" @ to restore fo factory settings. 4; Customization keys G1-G9, Delete, 8.7 ZX, CV, click these keys €8, the selling window will show Photos an @® 5. About Key settings, you can set Single key , Macro setting (9 , Multimedia @ and Combo keys 9 . Click Carl to activate soft keyboard.
Operating Instructions Thank you for choosing J. Tech. Digital product; please read the manual carefully before using it Introduction DESIGNER sw subcompact single-handed keypad. Bom foreignness 3 customizableahartcdt key groups are available (M1, M2: MB) each prolix his 9 shutout Rev [Ga Alter setting pressing one bunion can make things happen without having 10 type the Tull instructions, Functionalism dial has functions Hike Wm op and down um left and right.