Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. J-Tech Digital products are designed to make your A/V device use more convenient, comfortable and productive. The J-Tech Digital JTECH-WEX200 wireless HDMI extender allows the user to extend HD Audio & Video HDMI signals wirelessly up to 200 feet away to an HD capable display.
PACKAGE CONTENTS: 1. HDMI Wireless Transmitter 1pc 2. HDMI Wireless Receiver 1pc 3. IR Transmitter cable 1pc 4. IR Receiver cable 1pc 3 5. User manual 1pc 6. DC power adapter 2pcs 7. Antenna 4pcs 6 7 4 5 2 1 0 nels nels HDM I Ext ende r ble T ransm issio n Ch an Chan r sion ende smis I Ext Tran HDM able less djust Wire ith A igital 0ft w ch D FEATURES OF THE INTERFACE: Transmitter (TX) FIG.1 TX Front Panel View FIG.
POWER : Power indicator STATUS: System status indicator HDMI: HDMI input/output status indicator RESET : Factory Reset Button CHANNEL: Wireless channel switch button DC12V : 12V DC in jack IR OUT : Port for IR transmitter cable HDMI IN: HDMI input port HDMI OUT : HDMI loop output port Receiver (RX) FIG.3 RX Front Panel View FIG.
OPERATION AND CONNECTION: 1. Connect one HDMI cable from the HDMI source device (set top box, DVD player, streaming device) into the HDMI input port of the HDMI wireless TX. 2. Connect one HDMI cable from TV/Monitor into the HDMI output port of the HDMI wireless RX. 3. Connect the IR Transmitter cable to the HDMI wireless TX’s IR Out Port and the IR Transmitter cable must face the source device’s infrared eye/sensor. 4. Connect IR Receiver cable to the HDMI wireless RX’s IR In Port. 5.
Panel key operation instructions: 1. Changing Wireless Channel: Press the “CHANNEL” key on the front panel of TX to cycle through multiple 5GHz wireless channels. If the product works unsteadily or the picture is intermittent, please try a different channel. 2. Restore Factory Setting: Press and hold the RESET button for three seconds. The HDMI Status LED will flash three times and the device will restart. The OSD will show that Restore Factory Set is successful.
5. Enter the default login password: admin, click “Login” to open the settings interface. If you want to modify the login password, please click on the " Modify " button. After the password has been modified click "save" to save your changes and exit. Restore factory settings by clicking the "reset" button. 6. If you have made an incorrect setting adjustment or forgot the set password, you can restore factory settings on both transmitter and receiver.
S P E C IF IC AT IO N S : J T E C H -W E X 200 HDMI resolution ................................................... up to 1080P@50/60Hz HDMI Audio Format...............................................LPCM2.0/48KHz/16Bit HDMI Max bandwidth...................................................................225MHz HDMI Max baud rate..................................................................6.75Gbps Input/Output TMDS signal.......................................0.5~1.
N o te s : Please use the machine as instructed to preserve device longevity. 1. The machine should be placed in a location far from damp conditions, high-temperatures and dust. Please also avoid erosive and oxidative environments. 2. Avoid dropping, hitting or shaking the wireless extenders. 3. Touching the power adaptor with wet hands is prohibited. 4. Please hold the power adaptor head and do not pull the power cord when removing from an electrical socket. 5.
3 4 5 6 7 Displays “No signal” 1. Check the signal source is powered on and output is normal. 2. Check the signal source output resolution (ensure it is supported) 3. Make sure the HDMI cable is properly connected Transmission distance is short 1. Please adjust the angle of the antenna or adjust the placement 2. Concrete walls, Brick, Wallpaper, Metal, Bulletproof glass will shorten the signal cover range or cause significant signal loss 3. Co-channel interference.