Website: www.jtechdigital.com Toll Free: 1-888-610-2818[US] Email:Support@jtechdigital.
Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1. FEATURES Support USB/VGA/Composite/HDMI input. Select 1 of 4 source and distribute to 4 displays. Create a 2x2 Video Wall Controller from any source to four displays. Support multi-level cascading to create 3x3, 4x4...Video Wall (Max 10x10).
4. SPECIFICATIONS Operating Temperature Range 0 to +35°C (32 to +95°F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.0 volts p-p Input DDC Signal 5 volts p-p (TTL) Video Format Supported DTV/HDTV: 1080P/1080i/720P/ 576P/480P/576i/480i Audio Format Supported LPCM Input ports 1xHDMI, 1xUSB, 1xVGA, 1xAV Output ports 4xHDMI Splitter mode 1x4 HDMI Splitter Video wall mode 2x2,3x3,4x4......
Rear Panel 1. Power input port 4. USB input port 7. Audio input port 10. Audio output 2. IR Ext port 5. HDMI input port 8. CVBS input 11. HDMI output 3. RS232 port 6. VGA input port 9. L /R Audio input Right Panel 1.
8.
9. Remote Control Instruction 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Note 1: Power on/off Mute Next one Stop Previous one Play/Stop USB Disk input HDMI input AV input VGA input Menu Multi-function Button Up Left Right Down Mirror on/off Back Output 1 ~ Output 4 Splicing on/off is under USB mode. Note 2: is Multi-function Button. 2.1.Press button “ALL”, the “ALL” indicator will turn green, then press “ the main menu. 2.
2. Move the left or right arrow, enter into the below interface, choose “OSD Language English”, then press “Ok”. 3. Choose the required language, then press “OK”, press “ 7 ” back to the main menu.
9.1.2 Language setting for each output 1. Press the Output No on the remote and press “ choose the required language ”, press “OSD Language” and 9.2 Mirror Function ( 180°Rotation ) 1. Press the Output No on the remote, the press “ ” 2.
.3 Splicing Setup: 1. Press the Output No on the remote or use DIP Switch to choose the output, the relative indicator will turn green, then press “ ”. For example, if you need make splicing setup for output 1 to output4, press “1”,”2”,”3”,”4” on the remote, the indicator “1” to indicator “4” will turn green , then press “ 9 ”.
2. Choose “Splicing SETUP”, When the Horizontal Count and Vertical Count is the same, there will be no deformation on the image. 3. When cascade for NXN video wall , the output which cascade for next layer should be set as “1x1”, other outputs should be set as your required”NXN”. For example, if you need cascade for “3x3”, the output 1 need to connect with next Video Wall Controller , then the output 1 should be set as “1x1”, output2 to output4 should be set as “3x3”. 4.
9.5. Edge Adjust.
9.6 Scroll Text (Support CVBS/VAG/HDMI input modes) 1. Create a text document named “ARICH.TXT” under the USB DISK, enter the required content in the document. 2. Insert the USB Disk into the USB port of product. 3. Press”All” on the remote or set the DIP Switch to “010000” , then press “ ”.
4. Move the left or right arrow to choose “Scroll Text”. 5. Enter “Scroll Text”, you can set the Font size, Background Color, Font color, Flow Speed.
6. Turn on the Function, then re-power the Video Wall controller, there will be scroll text on the display. 9.7 USB Disk Input Mode 1.Choose USB input , press “ALL” button on the remote controller, then you can select the required file to play.
2.Press “OK” button when playing the video or displaying pictures.
3. Support JPG、PNG, BMP format pictures 4. Support MP3, FLAC format audio files. 5. Support AVI.WMV,MPG,MP4,RMVB video files 6.
9.8 CVBS/HDMI input mode: You can set as 16:9 or 4:3 in this mode. 9.
10. RS232 Control 1). Open CommUart Assistant. 2). Comport setting: Baud Rate: 115200 bps Parity: None Data Bits: 8 bit Stop Bits: 1 bit 3). Enter Port Command in Send options.
Command Features 99 06 FF FF Show Panel no for all HDMI outputs 99 07 FF FF Hide panel no for all HDMI outputs 79 92 FF AV input 79 93 FF VGA input 79 94 FF HDMI input 79 95 FF USB input All bellowing command is only effective for the selected output, please choose the output before sending command. 79 19 X Select from output1 to output4 (X: 1-4).
MAINTENANCE Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit. PRODUCT SERVICE 1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged; (b) Objects or liquids have gotten into the unit; (c) The unit has been exposed to rain; (d) The unit does not operate normally or exhibits a marked change in performance; (e) The unit has been dropped or the cabinet damaged.