User Manual

Operating Instructions

Website: www.jtechdigital.com

Toll Free: 1-888-610-2818

Email: support@jtechdigital.com

U S E R M A N U A L

4 Port HDMI USB KVM 4K@60Hz 4:2:0

JTD-ID:406

Control up to 4 computers with one keyboard or mouse.

Switch between KVM destinations via panel buttons, hot-keys,

desktop controller.

Auto Scan function to monitor connected computer operation.

USB Hub supports any USB 2.0 device

Supported Operating Systems: Dos, Win3.x / Win98 / 98SE /

2000 / ME / 2003 / 2008 / XP / Win7 / Win8 / WinNT / Netware

/ Unix / Linux / Mac OSX

Supports Hot-plug. You can plug/unplug the connected

computer w

ithout turning off the KVM switch or computer.

Supports resolutions up to 4096 x 2160 @ 60Hz

4 ports list should read:

port

KVM

switch

x User Guide

x Desktop Controller

HDMI

Cable

x 1.5M USB-A to USB-B Cable

PAGE 1
Operating Instructions Website: www.jtechdigital.com Toll Free: 1-888-610-2818 Email: support@jtechdigital.com U SER M A N UA L Control up to 4 computers with one keyboard or mouse. Switch between KVM destinations via panel buttons, hot-keys, desktop controller. 4 Port HDMI USB KVM 4K@60Hz 4:2:0 JTD-ID:406 Auto Scan function to monitor connected computer operation. USB Hub supports any USB 2.0 device Supported Operating Systems: Dos, Win3.
PAGE 2
H O T -K E Y D E S C R I P T I O N Press any key on the keyboard to exit Auto Scan. In addition to the panel control buttons and wired desktop controller, you can also operate the KVM switcher using simple keyboard “hot- key" keyboard combinations. NOTE: Each keystroke within a hot key sequence must be pressed within 2 seconds to send commands to the KVM switcher. Other wise, the hot-key sequence will not be accepted.