Operating Instructions Explore The High Definition World Website:www.jtechdigital.
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. I.
II. Features 1.HDMI 1.4, HDCP 1.4 and DVI compliant 2.Video resolutions up to 1080p@60Hz (YUV4:4:4) 3.HDMI High Bit Rate(HBR) audio pass through 4.150 meters transmission distance over CAT6 cable 5.POC (Power over Cable), either TX or RX is powered by one 24V@1A power supply See the description 1 6.Bi-directional infrared control signal transmission See the description 2 7.Bi-directional RS-232 signal transmission See the description 3 III.
IV. Specifications Technical HDMI Compliance HDMI 1.4 HDCP Compliance HDCP 1.4 Video Bandwidth 225MHz Video Resolutions up to1080P @60Hz YUV4:4:4、RGB4:4:4 Color Space RGB, YUV4:4:4, YUV 4:2:2 Color Depth 8-bit HDMI Audio Formats (Pass-through) LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.
ESD Protection Human body model — ±8kV (air-gap discharge) & ±4kV (contact discharge) Connections Transmitter :1x HDMI Type A [19-pin female] 1x IR INPUT [3.5mm Stereo Mini-jack] Inputs 1x RS232 [Phoenix jack] Receiver: 1x HD BaseT In [RJ45] 1x IR INPUT [3.5mm Stereo Mini-jack] 1x RS232 [Phoenix jack] Transmitter : 1x HD BaseT Out [RJ45] Outputs 1x IR OUTPUT [3.5mm Stereo Mini-jack] Receiver: 1x HDMI Type A [19-pin female] 1x IR OUTPUT [3.
Mechanical Housing Metal Enclosure Color Black Dimensions 115mm [W] x 64.7mm [D] x 17mm [H] Weight 406g Power Supply Input: AC100 - 240V 50/60Hz Output: DC 5V/1A (US/EU standards, CE/FCC/UL certified) Power Consumption Operation Temperature 5.
V. Operation Controls and Functions Front panel 1.Power: System power indicator. 2.DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. 3.HDBaseT Out: Standard HDBaseT output port.
cable following the standard of direct interconnection method. 4.HDMI In: Connect to HDMI source device such as Blu-ray or PS4 player. 5.IR In: Channel 2 IR Receiver. Connect to an IR receiver cable. 6.IR Out: Channel 1 IR Transmitter. Connect to an IR emitter cable. 7.RS-232: Phoenix jack provide serial port control from transmitter to receiver. 8.Connection Signal Indicator Lamp Illuminate: The Transmitter and Receiver are in good connections status.
Receiver 1.Power: System power indicator. 2.DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. 3.HDBaseT In: Standard HDBaseT input port. Connect HDBaseT Transmitter with a UTP cable following the standard of direct interconnection method.
4.HDMI Out: Connect to the HDTV or monitor HDMI input port. 5.IR In: Channel 1 IR Receiver. Connect to an IR receiver cable. 6.IR Out: Channel 2 IR Transmitter. Connect to an IR emitter cable. 7.RS-232: Phoenix jack provide Serial port control signal from transmitter to receiver. 8.Connection Signal Indicator Lamp Illuminate: The Transmitter and Receiver are in good connections status. Flashing: The Transmitter and Receiver are in poor connections status.
Description 1 POC (Power over Cable) Application Example 10
Description 2 Bidirectional Infrared control Application Example Description 3 Bidirectional RS232 control Application Example 11
12
VI.
www.jtechdigital.com ◢ Product pictures are for reference only. ◢ Specifications described herein are subject to change without prior notification. ◢ All trademarks are the sole property of their respective companies. ◢ Copyright ©J-Tech Digital,Inc. All rights reserved.