Application Guide

ManualsBrandsJ-Tech Digital ManualsAccessories & SuppliesHDMI H.264 IPTV Encoder 1080P 60Hz Supports RTSP, RTP, RTMPS, RTMP, HTTP, UDP, ONVIF, Live Broadcast for YouTube, Facebook, Twitch with Multiple Certifications

J-Tech Digital H.264 Encoder (JTECH-

ENCH4) Streaming Guide

Please see the product manual, to configure your network settings of your encoder, before attempting

to stream content to the following services. If you would like to request more services please email:

support@jtechdigital.com

YouTube Live

Access your YouTube Live settings (Figure 1) and combine your “Server URL” and “Stream name/key”

(separated by a forward slash "/").

Full RTMP URL Example: rtmp://a.rtmp.youtube.com/live2/zc3e-yw22-bbdw-baeg

Figure 1.

Enter the full RTMP URL into the “RTMP PUBLISH URL” setting (Figure 2) of your J-Tech Digital Encoder;

apply and reboot.

Note: For best results, check that in the advanced encoder settings that “TS muxer” is set to

“Compatible with FFMPEG”

Summary of content (8 pages)

PAGE 1
J-Tech Digital H.264 Encoder (JTECHENCH4) Streaming Guide Please see the product manual, to configure your network settings of your encoder, before attempting to stream content to the following services. If you would like to request more services please email: support@jtechdigital.com YouTube Live Access your YouTube Live settings (Figure 1) and combine your “Server URL” and “Stream name/key” (separated by a forward slash "/"). Full RTMP URL Example: rtmp://a.rtmp.youtube.
PAGE 2
Figure 2. Check “Stream Health” in YouTube (Figure 3) and adjust settings accordingly, per your specific stream requirements. Note: Use Google’s DNS servers (8.8.8.8 and 8.8.4.4), in your encoder’s network settings for best results. Figure 3. Facebook Live Navigate to your Facebook Live settings and combine your “Server URL” and “Stream name/key” (Figure 4) Full RTMP URL Example: rtmp://live-apia.facebook.
PAGE 3
Figure 4. Enter the full RTMP URL into the “RTMP PUBLISH URL” setting (Figure 5) of your J-Tech Digital Encoder; apply and reboot. Note: For best results, check that in the advanced encoder settings that “TS muxer” is set to “Compatible with FFMPEG” Figure 5. Check “Preview” in Facebook Live (Figure 6) and adjust settings accordingly, per your specific stream requirements. Note: Facebook will not stream any video signal that does not have an audio track.
PAGE 4
Figure 6. DaCast After creating a live channel, navigate to your "Encoder Setup" settings (Figure 7). Look in section 3 for your stream URL settings.
PAGE 5
Figure 7. Enter the full RTMP URL into the “RTMP PUBLISH URL” setting (Figure 8) of your J-Tech Digital Encoder; apply and reboot. Note: Use Google’s DNS servers (8.8.8.8 and 8.8.4.4), in your encoder’s network settings, for best results. Figure 8. To test the RTMP stream, click on the blue preview button at the bottom of your DaCast settings (Figure 9). Note: For best results, check that in the advanced encoder settings that “TS muxer” is set to “Compatible with FFMPEG” Figure 9.
PAGE 6
Figure 10. Enter the full RTMP URL into the “RTMP PUBLISH URL” setting (Figure 11) of your J-Tech Digital Encoder; apply and reboot. Note: Use Google’s DNS servers (8.8.8.8 and 8.8.4.4), in your encoder’s network settings, for best results.
PAGE 7
Figure 11. Check the Ustream Broadcaster (Figure 12) for a video stream. Twitch Click HERE and select an ingest server from Twitch. Then navigate to your Twitch stream key settings and combine your “Server URL” and “Stream name/key” (Figure 13) Example: rtmp://live-dfw.twitch.
PAGE 8
Figure 13. Note: All images used in this guide are for reference only and may not reflect your exact application. J-Tech Digital Support Team 1-888-610-2818 support@jtechdigital.