Installation Guide

Installation

Hardware List

Table top

Table leg

Support frame

8x16mm screw

8x35mm screw

Washer

spare 4x15mm Self-tapping

screws

Hexagonal screw tap

Tighten the screws to

fix the support frame

and table leg together.

8x35mm screw

PAGE 1
Installation Hardware List Hardware List 1 1 Table leg Table top 1 4 8x16mm screw Support frame 4 Washer 8x35mm screw spare 4x15mm Self-tapping 8 8 1 Hexagonal screw tap screws 1 8x35mm screw Tighten the screws to fix the support frame and table leg together.
PAGE 2
8x16mm screw Put the table top on the table leg, make sure the reserved screw holes of the table top and the frame are corresponding, tighten 8x16mm screws to finish the installation. This is a spare screw hole. When the 8x16mm screw fails to be screwed in, the hole can be fixed with a 4x15mm self-tapping screw. Either way will do.