J COMMUNICATIONS CO LTD. FCC ID : OAJGMRS1500XTM OPERATION EXHIBITS: 5 DAIS FUNCTIONS AND CONTROLS 1) POWER On/Off Button 11) Bultmann Microphone 2) MENU Button 12) ANTENNA 3) MENU Button 18) LCD Panel 4) MODE/KEY LOCK Burton 14) Sulla-in Sneaker 8) UP Button 15) DC Jack 8 DOWN Button 7) MONITOR Bunion 8) PTT Button 9) EXTERNAL Mic / Speaker 10) BATTERY Cover 3.
3.2.1 LEXICON Yul &CH CODE mm 1) VOX (Voice Activated Transmission) Indicator €9 Appears when VOX is activated. 2) Auto Scan Indicator O Icon appears when the Normal scan channel mode and Priority scan channel mode is activated. 3) Alarm Indicator 15%] Appears when the alarm mode Weather Alert Indicator > Appears when the Weather alert is selected .
~ To turn the Unit OFF, press and hold the Power Button(1) for more than 1,2 second, 2. UP(5) or DOWN(6) Button ~ Pressing the UP(5) or DOWN(6) Button in stand by mode, Volume is increased and decreased. Pressing the UP(5) or DOWN(6) Button in Menu mode allow you to change the setting of mean. 3. Mode(4) Button Pressing the Mode(4) Button allow you to change the mode.
« WEATHER : Weather alert COMPASS : Electrical compass function TEMPERA : Temperature TIME : Waite function STOPWATCH : Timer function -SETUP : The rest function Pressing the menu button(2, 3) allow you to go to another menu. And Pressing the Up(5) or Down(6) allow you to set desired value or menu. Finishing your selection, you press the monitor(7) or PTT(8) button or ten second is passed, And then the unit state is converted stand by mode. 33-1 TWO WAY MODE This mode is composed of 4 menu.
4) Voicemail Activated Transmission) selection Pressing the menu button(2, 3)in the Scan Selection mean allows you Tt enter VOX selection mode with key beeping. Pressing the up/down button(5, 6) in the VOX Selection mode allows you to select Off/Hi/Mid/Low while icon is blinking. No pressing PTT button(8), You can communicate voice to the other unit using mic or ear mic. If VOX function is selection, icon( is Shed. 33-2 FM RADIO MODE This mode is composed of 4 menu and received FM broadcasting.
You can select one of FM OFF/FM WAY by using the up/down button, 6) . If “OFF” is selected, yon cannot receive GARS but receive FM radio in the FM mode. And so you cannot receive FM radio but receive GARS in others mode, If “WAY” is selected, you can receive FM radio in all modes, except for unit’s transmission or reception 3.33 WEATHER MODE Pressing the function key(4) in the FM MODE allows you to enter weather Radio mode shows weather channel operation status after 1 second.
2) Compass Variation men. Pressing the menu button (3) in the Compass Calibration menu allows you to enter Compass Variation menu, You can one ont of DECK 90E ~ 90W by using up/down button(s, 6). 3.3-8 TEMPERATURE MODE ‘This mode is composed of three menu, and seen the current temperature.
selected before) And then you change value by using up(5) or down(6) button, Pressing the menu button(3), then displayed on LCD monitor. And then you change value by using up(5) or down(6) button. 3.36 TIME MODE ‘This mode is composed of 3 menu. You can use a watch in this mode.
~“BEEP ” :key beep selection ” :Quiet selection -“TOT ” : Time Out Timer selection ~“NAME * :User name(Unit name) set Pressing the menu button(2, 3) allows you to select the menu, and then you can change Men's state by using the up/down buttons, 6). ” : Priority scanning channel selection Pressing the menu button(3) in the SETUP mode allows you to enter in the priority scanning channel selection menu.
9 “NAME * : User name(Unit name) set It’s possible that you change in this menu. Call beep sound and selective calling is transmitted the other unit. When you call the other unit ( Double pressing the PTT button(8) allows you the selective calling the other unit.) using letters : A~Z, BLANK, *, +, -, 0~9, <, >, ? Press the menu button(2, 3), then “NAME OFF” is displayed on LCD monitor.
Safety Information Your wireless handheld portable transceiver contains a low power transmitter. When the Push-to Shoptalk) button is pushed it sends out radii frequency (RF) signals. This device is authorized fo operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices.