User's Manual

5/17

3. OPERATION

3.1 ICONS on LCD

1) VOX (Voice Activated Transmission) Indicator

VOX icon appears when VOX is activated.

2) Key Lock Indicator

Lock icon appears when the key lock is activated.

3) Large Segment Indicator

Large Segment

a) Indicates the channel number in use in normal mode.

b) Function menu is displayed in function Mode in the following

sequence :

( CH NOA/ SC / VO / Po/ Snd/ CAL/ bEP / rog/ tAL/ ViB )

4) Small Segment Indicator

Small Segment

a) Displays the CTCSS tone option in the standby mode. The CTCSS

option is shown in Hz.

b) Displays the sub-menu in each menu.

3.1.2 Description of Button function

1. Power / Shift Function

1) Short Push

- Press this button briefly to turn the unit on.

- When Power is on

(1) A momentary press of this button in the function edit mode is also used

to shift to the other function edit menu.

2) Long Push ( Press and hold for more than 1.2 seconds)

- Press this button for more than 0.3 second to turn the unit on.

PAGE 1
3. OPERATION 3.1 ICONS on LCD 1) VOX (Voice Activated Transmission) Indicator VOX icon appears when VOX is activated. 2) Key Lock Indicator Lock icon appears when the key lock is activated. 3) Large Segment Indicator Large Segment a) Indicates the channel number in use in normal mode.
PAGE 2
- Press this button for longer than 1.5 seconds to turn the unit off. 2. Function / Key lock Function (1) Short push - Press this button briefly to enter function edit menu or to shift to next function edit menu. - Pressing of this button in last function menu allows you to return to the stand by mode. (2) Long Push - Press for longer than 1.5 seconds to activate or inactivate in standby mode. 3. Up Key - In the standby mode, pressing this briefly will increase volume.
PAGE 3
.2 Operation Method Basic Feature 1. Selectable 22 channel and 38 CTCSS 2. VOX function 3. Key Lock 3.2-1. Channel and CTCSS Code selection mode - Press the function button once in the standby mode to access a channel and CTCSS selection mode. The flashing channel number appears on the displa y. Press the Up or Down button to select the desired channel. - Press the Power/Shift button to select the CTCSS 2-Digit code position which flashes. Press the up or down button to select the desired sub-code. 3.2-2.
PAGE 4