User's Manual

F-20-06 USER INSTRUCTION

1. Insert 1 piece battery (12V) in remote.

2. Press on the switch on vibrator for 3 sec, the green light flash, enter “standby”

mode.

3. Press the “ON/OFF” button on remote for one time, the vibrator start to vibrate;

Press the “mode switch” button on remote for the first time, vibrator are in

stronger vibration; Press the ““mode switch” button for the second time, vibration

are strongest; press the ““mode switch” button for the third time, vibrator enter

into the vibration mode of “weak to strong”; each time when user press the

““mode switch” button, vibrator will have a vibration mode of one special

frequency. This unit has seven different vibration modes.

4. Press “ON/OFF” button on remote for one time, the vibrator stop vibration.

5. Charging function: put the vibrator on charging cradle, the red light on vibrator

will light; at this time, the charging cradle will charge for the vibrator through

wireless charging. If it is in full charging, the red light on vibrator will turn into

green.

VIBRATOR CARE INSTRUCTION

1) Take care when using the Vibrator for the first time. Vibration can be intense.

2) Clean your vibrator after every use.

3) Take care when cleaning your vibrator. Remember it is an electrical item.

Moisture can damage the product and also react with the batteries.

Always remove the batteries before cleaning and after using your vibrator in order

to keep it in optimum condition.

4) Keep your vibrator clean and dry. Store in a non-damp environment. Moisture can

damage batteries and motor.

5) Always store your vibrator separately. Different materials have different chemical

configurations and may react with each other.

PAGE 1
F-20-06 USER INSTRUCTION 1. Insert 1 piece battery (12V) in remote. 2. Press on the switch on vibrator for 3 sec, the green light flash, enter “standby” mode. 3.
PAGE 2
6) Always allow your vibrator to cool down before storing in a safe place. Vibrators are electrical and motors grow warm with use. 7) Excessive usage of the vibrator will wear out the motor and may cause the motor to overheat. If you feel your vibrator is getting unduly hot, switch it off and allow it to cool down, before continuing to use. 8) Take care when using oils and lubricants so that they do not enter the battery compartment as they can react with the batteries.
PAGE 3
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help.